Arecont Vision SurroundVideo AV12366DN Manual

Arecont Vision sikkerhedskamera SurroundVideo AV12366DN

Læs gratis den danske manual til Arecont Vision SurroundVideo AV12366DN (21 sider) i kategorien sikkerhedskamera. Denne vejledning er vurderet som hjælpsom af 19 personer og har en gennemsnitlig bedømmelse på 3.9 stjerner ud af 10 anmeldelser. Har du et spørgsmål om Arecont Vision SurroundVideo AV12366DN, eller vil du spørge andre brugere om produktet?

Side 1/21
Arecont Vision SurroundVideo® WDR Camera Installation Manual
1 | P a g e
Arecont Vision SurroundVideo® WDR Camera Installation Manual
1 | P a g e
AV12186DN/AV12366DN SurroundVideo® Installation Manual
Inside the box:
A. Arecont Vision AV12186DN camera
B. Mounting template
C. Security L-key
D. 1.5mm Hex L-key
E. Power cable
F. I/O Cable
G. Pack of four (4) screws and four (4)
anchors.
NOTE: Anchors and screws are good to be used for
concrete, wall block and red bricks. Screws by
themselves can be used in wood.
Not included but needed:
#2 Phillips head screw driver
Image 1
How to Mount the Camera
1. Remove camera and hardware from the
b . ox
2. Using the Mounting template, prepare the
mounting provisions for camera
installation. NOTE: the 19.5mm diameter
hole on the Mounting template is where
the Ethernet cable will be exiting the
AV12186DN camera, align accordingly.
If using the side conduit hole, please see
step 7 below.
3. Using Security L-key, loosen the four (4)
screws securing the dome cover . (Image 2)
Remove vandal resistant dome cover. NOTE:
Do not remove screws from the dome cover.
Image 2
A
B
C
D
E
F
G


Produkt Specifikationer

Mærke: Arecont Vision
Kategori: sikkerhedskamera
Model: SurroundVideo AV12366DN

Har du brug for hjælp?

Hvis du har brug for hjælp til Arecont Vision SurroundVideo AV12366DN stil et spørgsmål nedenfor, og andre brugere vil svare dig