ArmyTek Wizard Magnet Manual

ArmyTek lampe Wizard Magnet

Læs gratis den danske manual til ArmyTek Wizard Magnet (2 sider) i kategorien lampe. Denne vejledning er vurderet som hjælpsom af 35 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 18 anmeldelser. Har du et spørgsmål om ArmyTek Wizard Magnet, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Specifications

Thank you for choosing the products of Armytek Optoelectronics Inc., Canada.

Please read this manual carefully before using the flashlight.

USER MANUAL

THE MOST TECHNICALLY ADVANCED

Armytek Optoelectronics Inc. is a Canadian manufacturer that produces powerful and reliable flashlights designed especially for your

needs. The components made in the USA and Japan. .10 years no-hassle warranty

§Amazingly powerful multi-flashlight with 1 250 LED lm brightness powered by only one 18650 Li-Ion battery.

§Rechargeable flashlight with magnet USB charger.

§TIR optics with light angles 70°:120° for wide light without a “tunnel vision” effect.

§Easy operation and 6 convenient brightness modes.

§Due to a side switch button you can operate the multi flashlight- easily with one hand without shifting it aside.

§Compact and light-weight but at the same time durable and multi-functional flashlight.

§Record runtimes – up to 1 days of operation on one battery.00

§Magnet in the tailcap, removable clip for fixation on a belt and flat tailcap for vertical standing.

§C l multi flashlightomp ete correspondence to the highest standards of durability and reliability: the - easily withstands fallings,

impacts and vibrations.

Warnings

Remember that old or low-quality batteries can be damaged under heavy load and explode.

Specifications are subject to change without notice.

* Light output for flashlights with Warm light are about 7% less, beam distances are about 3% less.

Model

Wizard XP-L Magnet USB

LED / Optics

Cree / TIRXP-L

Brightness stabilization type

DIGITAL (CPU brightness control)

Light output, LED / OTF lumens*

1250 / 1000

Peak beam intensity, candelas

3560

Hotspot / spill

70 ° / 1 0°2

Beam distance*

119 meters

Modes, light output (OTF

lumens*) and runtimes

(measured with 18650 Li-Ion

3400mAh until the light output

drops to 10% of the initial

value)

Turbo

1000 lm / 1.5h

Main3

39 lm / .8h0 3

Main2

180 lm / 9h

Main1

30 lm / 48h

Firefly2

2.3 lm / 18d

Firefly1

0.4 lm / 100d

Power source

1x18650 Li-Ion

Size and weight (without batteries)

Length 108mm, body diameter 24.5mm, head diameter 29mm, weight g65

Armytek Optoelectronics Inc.

Web: www.armytek.com Email: service@armytek.com

Address: 13-85 West Wilmot St, Richmond Hill, Ontario, L4B 1K7, Canada

Care and Storage

1. Always follow the instructions from this manual and recommendations on battery usage.

2. Apply only the recommended power sources.

3. Do not reverse battery polarity.

4. Do not use different power sources together, i.e. old ones with new ones, charged with

discharged. Do not use different types of batteries combined as the element with less

capacity can be damaged.

5. Do not modify or recast the flashlight and its components as it will deprive you of the

warranty.

6. Do not allow water or any other liquid to leak into the flashlight.

7. Do not aim a switched-on flashlight at people's or animals' eyes – it can cause temporary

blindness.

8. Do not allow children to use the flashlight without your assistance.

The producer will not be liable for any harm done to the user if it was caused by

improper use of the product.

It is recommended to clean the threads and O-ring off dirt and old grease once or twice per year. Remember that protection s reliable

from water and dust cannot be provided by worn out sealing. The fouling as well as lack of lubricant cause fast wear-out of threads and

sealing rings.

To clean the threads do the following:

1. Unscrew the tailcap and remove the sealing ring carefully with a toothpick (do not use sharp metal things as they can damage the ring).

2. Wipe the sealing ring thoroughly with a soft cloth (or tissue). Do not use solvents. If the sealing ring is worn out or damaged

replace it by a new one.

3. Clean the metal threads with a brush using ethanol. Be careful not to allow the applied liquid to get inside the flashlight or tailcap as

it can cause fails in functionality of the flashlight.

After cleaning lubricate the thread and the sealing ring with polyalphaolefin-based silica grease, e.g. Nyogel 760G.The application of

automotive and other improper grease can cause swelling and damage of the sealing rings.

In case of active operation and exploitation in dusty environments, it is recommended to perform cleaning and lubricating of the parts

as often as required.

The flashlight will get hot in Turbo mode quickly and discharge the battery by high current. Don't leave it without your attention as very

bright light can heat objects and be a cause of the fire.

Wizard

Magnet USB

Service and Warranty

Armytek provides free warranty repair for 10 years (excluding batteries, chargers, switches and connectors which have 2 years

warranty) from the date of buy with the document confirming the purchase.

Guarantee does not extend to damage during:

1. Improper usage.

2. Attempts to modify or repair the flashlight by nonqualified specialists.

3. Longtime application in chlorinated or polluted water, or other liquids (other than water).

4. High temperatures and chemicals' exposure (including the exposure of liquid from defected batteries).

5. Usage of low-quality batteries.

OperationSet description

Initial Service

To set/replace batteries:

1. Unscrew the tailcap.

2. Place the batteries with the positive contact (+) facing the head of the flashlight.

3. Adjust the tailcap and tighten it as far as it can go.

The flashlight is ready for operation.

3. Click x1

OFF Main (if last used)в

Main

Press & Hold

OFF Firefly1 Firefly2в в

Firefly

ON Turboв

Turbo Last modeв

Click x2 Turbo

Main1 Main2в

ез

Main3

Press & Hold

In OFF state:

Click: To turn on the last used mode.

Press and hold: To go through 2 Firefly modes (release to select). Keeping button pressed will start cycling through the Main modes.

In ON state:

Click: To turn off the flashlight.

Press and hold: To start cycling through the Main modes.

Double click: To turn on the Turbo mode. The second double click brings back the last used mode.

For comfortable operation you have a convenient momentary access to all the following modes:

Main. Short click from OFF-state activates the Main mode (if

it was the last mode used previously).

Firefly. Press and hold the button in OFF-state to turn on the

desired Firefly mode and then release immediately. Keeping

the button pressed will start cycling through the Main

modes.

Turbo. The mode is activated by double click in any mode. To

return to the last mode make double-click again.

Cycling through the Main modes. In ON-state press and hold

the button (in any mode): the 3 Main modes will start

switching cyclically. Release the button to select the desired

mode. In Turbo mode it starts cycling through the Main

modes.

Automemorizing. After switching off the last used Mode is memorized for quick 1-click access at next switching on.

Lock-out function. Unscrew the tailcap to 1/4 for the protection from accidental switching on.

Low Battery Indication. If the brightness is <25% from the nominal value, the LED flashes 2 times

ONCE (after 30sec from switching on). If you are not sure if it flashed or not switch the flashlight

off and on: in case the battery is low flashes will repeat. Light output decreases to Firefly mode at

critical level.

Active temperature control. T can quickly heat up Turbo . W the he flashlight in mode hen

temperature become +60 C – small steps °the brightness decreases by . After cooling-down

( ) Turboprovided that battery voltage is sufficient the brightness increases to the mode again.

This stepping goes cyclically to maintain the user's safety and the flashlight's functionality. In

conditions of good air-cooling the flashlight delivers light without stepping down even in Turbo

mode. There are no preset timers for stepping, but real- active temperature measurements.time

Warning

Low Battery Indication

Critical

вFirefly1

вOFF

Cycling through Modes

We DO NOT RECOMMEND to leave power sources inside the flashlight for a long storage period, as batteries (especially, non-rechargeable) can

leak for various reasons and damage the inner parts of the flashlight. If you want to keep your flashlight in a stand-by state with batteries in then use

new and quality batteries store the flashlight in acceptable for batteries operational temperature and revise the batteries' state at least high- and

once a month. If you have noticed any signs of batteries' defects then withdraw them from the flashlight and utilize. It is also recommended to