Arozzi Arena MOTO Manual

Arozzi Bureau Arena MOTO

Læs gratis den danske manual til Arozzi Arena MOTO (22 sider) i kategorien Bureau. Denne vejledning er vurderet som hjælpsom af 38 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 19.5 anmeldelser. Har du et spørgsmål om Arozzi Arena MOTO, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/22

073

Designed in Sweden© Arozzi Europe AB. 2024

ARENA MOTO

Operations Manual

Display

Down

Set Memory

Save 1

Save 2

Save 3

Save 4

Up/Down operation

Wake up controller

Position memory

Setting a minimum height

• Press the Up button until you reach your desired height. The operation stops when reaching the

highest possible point.

• Press the Down button until you reach your desired height. The operation stops when reaching the

lowest possible point.

• Short-press Up or Down and the display will show current height and react to further input

• You can save up to four positions corresponding to the save buttons (1, 2, 3, 4). Save the current

position by pressing the M key and then your prefferred save button.

• You can see previously saved positions by short-pressing any save button. The display will then show

the saved height.

• Double click or long press any of the save buttons (1, 2, 3, 4) and the desk will move to the

corresponding position.

• To set the current height as minimum height for the desk, hold down both Down + M buttons until the

display shows ” ” indicating that the minimum height has been stored. Storing a minimum height -do

ensures that the desk never goes below this position.

• To delete the saved minimum height, let the desk run downwards until it stops. Press down again and

the display shows ” ”. Then hold down Down + M buttons until the display shows ” ” indicating -Lo -do

that the stored minimum height has been deleted.

Setting a maximum height

Mechanical reset

0 position reset

Lock and unlock

Error codes

• To set the current height as maximum height for the desk, hold down both Up + M buttons until the

display shows ” ” indicating that the maximum height has been stored. Storing a maximum height -up

ensures that the desk never goes above this position.

• To delete the saved maximum height, let the desk run upwards until it stops. Then press the Up button

again and the display shows ” ”. Then hold down Up + M buttons until the display shows ” ” -hI -up

indicating that the stored maximum height has been deleted.

• Hold down both Up + Down buttons at the same time until the display shows ” ”. Let the desk run. ---

After it has stopped, the reset is complete. This resets maximum height and minimum height.

• Hold down the Down button until the display shows ” ”. The desk will run downwards to recognize ---

the 0 height. It will then move up to its xed position.

• Lock/unlock the controller unit by holding down the M + 4 buttons until the display shows ” ” for L

locked, or returns from ” ” to regular numbers for unlocked.L

* Contact Arozzi support.

EU: arozzi.se/support --- US: arozzi.com/support

Code Description Clear method

E01 Motor A - Not connected Press up / down button -> Check motor A cable

E02 Motor B - Not connected Press up / down button -> Check motor B cable

E03 Motor A - Overcurrent Press up / down button -> Reduce load -> Replace motor A *

E04 Motor B - Overcurrent Press up / down button -> Reduce load -> Replace motor B *

E05 Press up / down button -> Check A cable -> Replace motor A*Motor A - Internal sensor failure

E06 Motor B - Internal sensor failure Press up / down button -> Check B cable -> Replace motor B*

E07 Main power supply problem Unplug the desk. Plug it in again -> Replace power supply *

E08 Motor A - Abnormal current Unplug the desk. Plug it in again -> Replace motor A *

E09 Motor B - Abnormal current Unplug the desk. Plug it in again -> Replace motor B *

E10 Motor A - Power device failure Unplug the desk. Plug it in again -> Replace motor A *

E11 Motor B - Power device failure Unplug the desk. Plug it in again -> Replace motor B *

E12 Position set failure Perform 0 position reset (See above)

E13 Overheat protection Wait for temperature to drop

E14 Motor A - Stalled Press up / down button -> Reduce load -> Replace motor A *

E15 Motor B - Stalled Press up / down button -> Reduce load -> Replace motor B *

E16 Unbalanced position Perform mechanical reset (See above)

E17 Critical data loss Perform mechanical reset (See above)

RST Overload protection Reduce load on desk

Designed in Sweden

Produkt Specifikationer

Mærke:	Arozzi
Kategori:	Bureau
Model:	Arena MOTO

Har du brug for hjælp?

Hvis du har brug for hjælp til Arozzi Arena MOTO stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Bureau Arozzi Manualer

Arozzi Arena Medium Manual

27 December 2024

Arozzi Arena MOTO Manual

5 September 2024

Bureau Manualer

Nyeste Bureau Manualer

Seville Classics OFF65992B Manual

1 April 2025

Safco 5273 Manual

29 Marts 2025

Safco 1951 Manual

29 Marts 2025

Safco 5272 Manual

29 Marts 2025

Ikea ALEX 805.888.88 Manual

12 Marts 2025

Ikea ALEX 605.485.20 Manual

13 Februar 2025

Ikea GLADHÖJDEN 304.939.39 Manual

13 Februar 2025

Ikea HAUGA 904.776.77 Manual

13 Februar 2025

Ikea KJELLARNE 406.136.77 Manual

13 Februar 2025

Ikea GLADHÖJDEN 205.508.31 Manual

13 Februar 2025