Artusi CAEH1 Manual

Artusi Ikke kategoriseret CAEH1

Læs gratis den danske manual til Artusi CAEH1 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 22 personer og har en gennemsnitlig bedømmelse på 4.1 stjerner ud af 11.5 anmeldelser. Har du et spørgsmål om Artusi CAEH1, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Description of the hot plates

Use

Directions for Use

Small Plate

Large Plate

Knob

Indicator Light

Red Spot

Large Plate

3 Cooking soups ,larger dishes

1 MIN.Warming up

2 Stewing vegetables,slow cooking

4 Slow frying

5-6 Grilling meat,fish

0 Switch off

Technical Data

Model Power Supply Electric Plate Power(W) Size

Built-in Hole Size

1000

AC 220-240 V

50Hz 580X78 557(L)X477(W)

145mm

Small Plate

500X

2000

(Red) 185mm

1500

185mm

Good Bad Bad Bad Bad Bad Bad

(recessed base) (convex base) (undersize) (oversize) (moisture on hotplate) (no Pan)

Cod:0070302043

IMPORTANT NOTICE

Please register your warranty card and return the enclosed certificate of guarantee, duly

dated and signed.A duplicate data label and wiring diagram are contained in this booklet.

Please keep these in a safe place.The manufacturer shall not be held responsible for any

inaccuracies in this instruction booklet due to printing errors and the designs in the diagrams

are purely indicative.The manufacturer also reserves the right to make any modifications to

the products as may be considered necessary or useful, without jeopardising the main

function or safety features of the products.

1. Do not touch the appliance with wet hands.

2. Do not operate the appliance when barefoot.

3. Do not allow children to operate the hob.

4. Please disconnect the power supply before any maintenance and cleaning.

5. When the hob is working, the temperature of the hob top increases. Please do not touch and

keep children away from it.

6. A steam cleaner must not be used to clean the appliance.

7. The appliance is not intended to be operated by means of an external timer or separate

remote-control system.

8. The power supply should use H05VV-F.

9. The hob must be built into a heat-resistant cabinet. Smoke may be visible when first used – this

is normal. Please leave on for a few minutes to burn off excess oils used during manufacture.

Operation

The electric plates can either be standard or rapid type. The latter feature a red spot in the centre.

According to requirements, the plates can be adjusted by turning the knobs either clockwise or

anti-clockwise to any of the 6 positions besides the 0 position (Off). The higher the number, the

greater the output of heat (see table below). When using rapid plates, a thermostat automatically

reduces the power when the selected temperature is reached and the plate cycles intermittently to

keep a constant cooking temperature. The indicator light is a signal that the electric plates are

switched on.

The level of heat can be adjusted gradually by turning the appropriate knob to the right or left.

The indicator light can be found on the control panel – please see above diagrams.

An appropriately sized pan saves energy.

The correct pan should have a thick, flat base, with a diameter equal to the plate diameter,

so that heat is transferred more efficiently.

Advice on the Use of Electric Plates

Never leave the plates on without pans on them, or with empty pans and never use the

plates to heat crockery. Switch on the plates after having set the pans on them.

Once switched off, the plates remain warm for a while, do not touch.

Switch off the heating plate before removing the pans.

Pans

- Use pans with flat bottoms. Uneven or thin bottoms will waste energy and are slow to

cook.

- Smaller pans will waste energy.

- Do not use oversized pans. More than 50mm overhang can cause components to

overheat and cause fine cracks in enamel or even damage heating elements.

- Use only dry pans. Do not place wet or condensated items (eg. lids) on the hotplates.

Use

- Do not use pots and pans that are unsteady and likely to rock or overturn.

- Do not operate the hob for an extended time without a pan on the hotplate.

CAEH1

Please read the instruction manual carefully before operating your new hob.

Dear Owner: Thank you for purchasing our cooktop which is designed to give you many years of

cooking pleasure. Before using your new appliance please read the user's manual carefully and

keep it in a safe place for future reference.

THIS APPLIANCE MUST BE INSTALLED ONLY BY A QUALIFIED PERSON IN

INSTRUCTIONS PROVIDED. THE MANUFACTURER DECLINE ALL RESPONSIBILITY FOR

IMPROPER INSTALLATION WHICH MAY HARM PERSONS AND ANIMALS OR CAUSE

DAMAGE TO PROPERTY. THE APPLIANCE MUST BE USED ONLY FOR THE PURPOSE

FOR WHICH IT WAS EXPRESSLY DESIGNED. ANY OTHER USE (e.g. HEATING ROOMS) IS

CONSIDERED TO BE IMPROPER AND MANUFACTURER DECLINES ALL RESPONSIBILITY

FOR DAMAGE RESULTING FROM IMPROPER AND IRRESPONSIBLE USE.

Danger of fire: Do not store items on the cooking surfaces.

CAUTION: The cooking process has to be supervised. A short term

cooking process has to be supervised continuously.

WARNING: Unattended cooking on a hob with fat or oil can be

dangerous and may result in a fire.NEVER try to extinguish a fire

with water, but switch off the appliance and then cover flame e.g.

with a lid or a fire blanket.

SAFETY WARNING

1. Please check the built-in electric hob's integrity after opening the package. If there are any

problems please refer to the supplier.

2. Do not throw the package materials (plastic bag, foam, nails, package etc) in a place where

children can easily access. Please dispose of packaging in an environmentally friendly

manner.

3. Do not change the wiring under any circumstances.

4. Dispose of the appliance in an environmentally friendly manner.

5. If the supply cord is damaged,it must be replaced by the manufacturer its service agent or

similarly qualified persons in order to avoid a hazard.

6. The appliance is not to be used by persons (including children) with reduced physical,

sensory or mental capabilities, or lack of experience and knowledge, unless they have been

given supervision or instruction.children being supervised not to play with the appliance.

7. Do not stare at the hob elements when the appliance is working.

8. Accessible parts may become hot during use. To avoid burns young children should be

kept away

9. WARNING: If the surface is cracked, switch off the appliance to avoid the possibility of

electric shock, for hob surfaces of glass-ceramic or similar material which protect live parts

10.Shall state a steam cleaner is not be used.

11.Metallic objects such as knives, forks, spoons and lids should not be placed on the hob

surface since they can get hot.

12. CAUTION:The surface temperature exceeds 95°C.To avoid a hazard,under bench access

must be restricted.Refer to the installation instructions.

13. WARNING:The appliance and its accessible parts become hot during use. Care should be

taken to avoid touching heating elements.Children less than 8 years of age shall be kept

away unless continuously supervised.

14.The appliance is not intended to be operated by means of an external timer or separate

remote-control system.

15.WARNING: Use only hob guards designed by the manufacturer of the cooking appliance

or indicated by the manufacturer of the appliance in the instructions for use as suitable or hob

guards incorporated in the appliance. The use of inappropriate guards can cause accidents.

V20190830

The connection cable must be secured in a strain-Relief clamp.

Caution!

Remember to connect the safety circuit to the connection box terminal marked with

cut off in case of emergency. The distance between the working

switch must be at least 3 mm. Before connecting the cooker to the power supply it is

important to read the information on the data plate and the connection diagram.

The manufacturer will not accept any responsibility if the applicable standards are

not respected.

The electricity supply for the hob must have a safety switch which enables the power to be

contacts of the safety

This appliance must be installed only by authorised personnel and in accordance with

Australia and New Zealand regulations. The surfaces must be capable of sustaining

temperatures of 80°C. All laminates, fixing adhesive and surface materials should be

certified suitable for this temperature.

According to the diagrams below, cut a hole in the worktop and insert the hob. The hob can

be fitted to any worktop with a thickness of 40mm or 50mm.

Please note the following:

1. Fire resistant material (eg. ceramic tiles) is required to a height of 450mm above the hob

top and wall or vertical structures are not permitted within 200mm of the hotplates.

2. No overhang or cooker hood is permitted within 600mm distance in height above the

hotplates.

3. Leave at least 50mm clearance between the underside of the appliance and any

combustible area.

4.Never leave packaging components (plastic bags, polystyrene etc) within reach of

children.

INSERTING AND FIXING THE HOB

Before inserting the hob into the work surface, place the adhesive seal (a) around

the underside edge of the hob. It is important to fix this seal evenly without gaps or

overlapping

to prevent liquids from seeping underneath the hob. Please follow the below instructions:

1) Place the seal around the bottom edge of the hob as shown in the illustration below.

2) Place the hob in the installation opening and push it down so that the hob is resting

firmly

on the worktop.

3) Secure the hob in position using the fixing brackets supplied.

Screw one end of the bracket into the pre-drilled holes in the underside of the hob.

The other end of the bracket should be located underneath the worktop to secure the hob

in position.

600-750

Recommended installation

Board

580

557

477

500

Ventilation slot ≥ 30mm

50mm MIN.

• If the cable is damaged or to be replaced, the operation must be carried out the by

after-sale agent with dedicated tools to avoid any accidents.

• If the appliance is being connected directly to the mains an omnipolar circuit-breaker must

be installed with a minimum opening of 3mm between contacts.

• The installer must ensure that the correct electrical connection has been made and that it

is compliant with safety regulations.

• The cable must not be bent or compressed.

• The cable must be checked regularly and replaced by authorised technicians only.

Worktop

Fixing bracket

Screw

TROUBLESHOOTING

PROBLEM CHECKLIST

Hob does not work Check the wiring connection

Check the fuse and voltage

Smoke when hob is on

•

This is normal on first use

•

Damaged wire •Contact service provider and do not attempt

to use

•

Clean area around hotplates

CONNECTION DIAGRAM

Caution! Voltage of heating elements 220-240V

Caution! In the event of any connection the safety

wire must be connected to the E terminal.

Recommended

type of

connection

lead

CLEANING

The appliance must be turned off at the mains before carrying out any maintenance. Make

sure the hob plates are not hot prior to any cleaning or maintenance. Any abrasive cleaners

(such as Cif) will scratch the surface and could erase the control panel markings. Stainless

steel can be effectively cleaned by simply using a dilute solution of water and washing up

liquid and drying to a shine with a clean cloth. Over time with use, the stainless steel surface

may discolour – this is normal and does not constitute a fault with this appliance. Proprietary

stainless steel cleaners are available.

HOTPLATE CARE

The finish of the cast iron hotplates is designed to be durable in use. The following tips

should be observed to get the best from your hob:

1. Do not use decorative covers as these can cause damage to the surface and lead to rust.

2. Use a special hotplate surface cleaner to protect and restore the surface of the hotplates.

3. Do not use soap and water on the hotplates. Wipe up spills and splashes immediately.

4. Never operate the hob without a pan, unless it is for a few seconds (as below).

5. Deposits of fat can be burned off by turning the hotplate on for a few seconds. The fat will

brush off when the appliance has cooled down.

TECHNICAL INFORMATION FOR INSTALLATION (Qualified Personnel Only)

Electrical Connection

Appliances with three-pole cables are set up for operation with alternating current at the

voltage and frequency indicated on the rating plate. Please ensure you have studied and are

familiar with the connection wiring diagram provided prior to installation. Note that the earth

conductor is yellow/green. The connection to the electricity supply must be made by a

qualified person and following the regulations in force. When the appliance is to be installed

above a built-in oven, the two appliances must be connected separately.

The supply cable must be so positioned that no point can reach a temperature 50° C higher

than the ambient temperature. Also check that the supply system has an effective earth

connection and corresponds to the standards in force and that the plug (or omnipolar switch)

can be reached easily when the appliance is installed.

Fitting Guidelines

The voltage rating of the hob heating elements is 220-240V. Adapting the hob to operate

with one-phase current is possible by appropriate bridging in the connection box according to

the connection diagram below. The connection diagram is also shown on the cover of the

connection box. Remember that the connection wire should match the connection type and

the power rating of the hob.

Power configuration mode

Minimum cable size (mm2)2.5

CAEH1

By ensuring that this appliance is disposed of correctly, you will help prevent any possible harm to

The environment and to human health which might otherwise be caused if disposed of in the

wrong way.

The symbol on the product indicates that it may not be treated as normal household waste.

It should be taken to a collection point for the recycling of electrical and electronic goods.

For further information regarding the treatment, recovery and recycling of this product, please contact

your local council, household waste disposal service or the shop where you purchased the product.

Produkt Specifikationer

Mærke:	Artusi
Kategori:	Ikke kategoriseret
Model:	CAEH1

Har du brug for hjælp?

Hvis du har brug for hjælp til Artusi CAEH1 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Artusi Manualer

9 Juli 2025

8 Juli 2025

15 Juni 2025

14 Juni 2025

3 September 2024

3 September 2024

Artusi AGS792W Manual

1 September 2024

Artusi AFG915BKP Manual

1 September 2024

Artusi CACC60 Manual

30 August 2024

Artusi CACC70 Manual

30 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Ikea KOPPLA 404.095.77 Manual

31 Juli 2025

Berner Architectural Elite 8 Manual

31 Juli 2025

Tripp Lite Protect It! TLP26PD30WCAM Manual

31 Juli 2025

Yealink RT20U Manual

31 Juli 2025

Tripp Lite PR60 Manual

31 Juli 2025

Advantech UTC-520J Manual

31 Juli 2025

Tripp Lite Protect It! TLM615SA Manual

31 Juli 2025

Tripp Lite SU6000XFMR2UTAA Manual

31 Juli 2025

Tripp Lite IBAR4-6D Manual

31 Juli 2025

Tripp Lite Protect It! TLP606TAA Manual

31 Juli 2025