Asus TM-582 Manual

Asus Computerbehuizing TM-582

Læs gratis den danske manual til Asus TM-582 (2 sider) i kategorien Computerbehuizing. Denne vejledning er vurderet som hjælpsom af 37 personer og har en gennemsnitlig bedømmelse på 4.1 stjerner ud af 19 anmeldelser. Har du et spørgsmål om Asus TM-582, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

T A/TM 5 Se r i e sT A/ T M 5 Se r i e s

T A/ T M 5 Se r i e sT A/ T M 5 Se r i e s

T A/ T M 5 Se r i e s

TA-TM 5 Series

E 2 0 7 0E 2 0 7 0E 2 0 7 0E 2 0 7 0E 2 0 7 0

15G067224000

Removing the side cover and front bezelRemoving the side cover and front bezel

Removing the side cover and front bezelRemoving the side cover and front bezelRemoving the side cover and front bezel

11111 22222 33333

Remove the screws on

the rear panel.

Push the side cover towards

the rear panel.

Release the side

tabs that secure

the front bezel to

the chassis.

Swing the front bezel in the

direction of the arrow.

Unhook the hinge-like tabs. Set the

front bezel aside.

44444

Installing the power supply unit (PSU)Installing the power supply unit (PSU)Installing the power supply unit (PSU)Installing the power supply unit (PSU)Installing the power supply unit (PSU)

222

Locate the PSU slot.

33333

Slide the PSU into the slot

until it snugly fits the

metal rail.

Secure with screws.

Installing an optical disk drive (ODD)Installing an optical disk drive (ODD)Installing an optical disk drive (ODD)Installing an optical disk drive (ODD)Installing an optical disk drive (ODD)

211111

Insert the ODD into the bay.

Push the bay lock upward.

Align the ODD holes with

the bay holes, then push

down the bay lock to

secure the ODD.

Release the lock tabs on

the front bezel to

disengage the drive cover.

44444

Installing a hard disk drive (HDD)Installing a hard disk drive (HDD)Installing a hard disk drive (HDD)Installing a hard disk drive (HDD)Installing a hard disk drive (HDD)

22222

1. Push the bay lock

upward.

2. Insert the HDD into the

bay.

3. Align the HDD holes

with the bay holes,

then push down the

bay lock to secure the

HDD.

111

33333

Installing a floppy disk drive (FDD)Installing a floppy disk drive (FDD)

Installing a floppy disk drive (FDD)Installing a floppy disk drive (FDD)Installing a floppy disk drive (FDD)

211

Insert the FDD into the bay.

Make sure the FDD holes

align with the chassis holes.

Using a screwdriver, push

the knock-down metal

cover in and out of the

chassis until it is removed.

Secure the FDD with

screws.

Release the lock tabs on the

front bezel to disengage the

drive cover.

44444

Installing an expansion cardInstalling an expansion cardInstalling an expansion cardInstalling an expansion cardInstalling an expansion card

11111

333

Align the card connector

with the slot, then press

firmly until the card is

completely seated on the

slot.

Choose the slot that you

want to use. Push to

unlock the lock tab.

Remove the metal cover

opposite the slot that you

want to use.

Photo shows the card

seated on the slot.

Push the expansion card

lock on the rear panel to

secure the slot.

44444

Reinstalling the side cover and front bezelReinstalling the side cover and front bezelReinstalling the side cover and front bezelReinstalling the side cover and front bezelReinstalling the side cover and front bezel

11111

Hook the hinge-like

tabs to the holes on

the chassis. Swing

the front bezel in the

direction of the

arrow and push to

secure the front

bezel to the chassis.

Push the side cover towards

the front bezel.

33333

Drive screws on the rear

panel.

22222

Screwless ModelScrewless Model

Screwless ModelScrewless ModelScrewless Model

T A/ T M 5 S e r i e sT A / T M 5 Se r i e s

T A/ T M 5 S e r i e s

TA-TM 5 Series

Removing the side covers and front bezelRemoving the side covers and front bezel

Removing the side covers and front bezelRemoving the side covers and front bezelRemoving the side covers and front bezel

11111 22222 33333

Remove the screws on

the rear panel.

Push the side cover towards

the rear panel.

Repeat steps 1 and 2 to

remove the other side cover

Release the side

tabs that secure

the front bezel to

the chassis.

Swing the front bezel in the

direction of the arrow.

Unhook the hinge-like tabs. Set the

front bezel aside.

44444

Installing the power supply unit (PSU)Installing the power supply unit (PSU)Installing the power supply unit (PSU)Installing the power supply unit (PSU)Installing the power supply unit (PSU)

222

Locate the PSU slot.

33333

Slide the PSU into the slot

until it snugly fits the

metal rail.

Secure with screws.

Installing an optical disk drive (ODD)Installing an optical disk drive (ODD)Installing an optical disk drive (ODD)Installing an optical disk drive (ODD)Installing an optical disk drive (ODD)

211

Insert the ODD into the

bay.

Align the ODD holes with

the bay holes, then secure

the ODD with screws on

both sides of the bay.

Release the lock tabs on

the front bezel to

disengage the drive cover.

33333

Installing a hard disk drive (HDD)Installing a hard disk drive (HDD)Installing a hard disk drive (HDD)Installing a hard disk drive (HDD)Installing a hard disk drive (HDD)

22222

1. Insert the HDD into

the bay.

2. Align the HDD hole

with the bay hole.

3. Secure the HDD with

a screw on both

sides of the bay.

111

33333