ATen PE1114A Manual


Læs gratis den danske manual til ATen PE1114A (16 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 2 anmeldelser. Har du et spørgsmål om ATen PE1114A, eller vil du spørge andre brugere om produktet?

Side 1/16
eco PDU PE Series
SNMP Settings
User Instructions
www.aten.com
NRGence User Help
ii
User Information
Online Registration
Telephone Support
For telephone support, call this number:
User Notice
All information, documentation, and specifications contained in this manual are subject to change
without prior notification by the manufacturer. The manufacturer makes no representations or
warranties, either expressed or implied, with respect to the contents hereof and specifically
disclaims any warranties as to merchantability or fitness for any particular purpose. Any of the
manufacturer's software described in this manual is sold or licensed as is. Should the programs
prove defective following their purchase, the buyer (and not the manufacturer, its distributor, or its
dealer), assumes the entire cost of all necessary servicing, repair and any incidental or
consequential damages resulting from any defect in the software.
The manufacturer of this system is not responsible for any radio and/or TV interference caused by
unauthorized modifications to this device. It is the responsibility of the user to correct such
interference.
The manufacturer is not responsible for any damage incurred in the operation of this system if the
correct operational voltage setting was not selected prior to operation. PLEASE VERIFY THAT
THE VOLTAGE SETTING IS CORRECT BEFORE USE.
PE Device Safety Notice
International http://support.aten.com
North America http://www.aten-usa.com/product_registration
International 886-2-8692-6959
China 86-10-5255-0110
Japan 81-3-5615-5811
Korea 82-2-467-6789
North America 1-888-999-ATEN ext 4988
United Kingdom 44-8-4481-58923
Set the maximum permissible breaker protection in the building circuitry to the
current rating specified on the rating plate. Observe all national regulations and
safety codes as well as deviations for breakers.
Only connect the PE Device to a grounded power outlet or a grounded system!
Make sure that the total current input of the connected systems does not exceed
the current rating specified on the rating plate of the PE Device.
There is a risk of explosion if the battery is replaced with an incorrect type.
Dispose of used batteries according to the relevant instructions.


Produkt Specifikationer

Mærke: ATen
Kategori: Ikke kategoriseret
Model: PE1114A
Vekselstrømsindgangsfrekvens: 50 - 60 Hz
Produktfarve: Sort
Opbevaringstemperatur (T-T): -20 - 60 °C
Relativ luftfugtighed ved drift (H-H): 0 - 80 %
Ethernet LAN-porte (RJ-45): 1
Driftstemperatur (T-T): 0 - 60 °C
Husmateriale: Metal
Strømstik: NEMA 5–15
Nominel udgangsspænding: 100-120 V
Nominel indgangsspænding: 100-120 V
AC udgange, antal: 14 AC stikkontakt(er)
AC stikkontakt typer: NEMA 5–15
Strøm (maks.): 12 A

Har du brug for hjælp?

Hvis du har brug for hjælp til ATen PE1114A stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret ATen Manualer

ATen

ATen CS1964 Manual

7 Juli 2025
ATen

ATen CL6708MW Manual

6 Juli 2025
ATen

ATen KL1508Ai Manual

6 Juli 2025
ATen

ATen VK320 Manual

6 Juli 2025
ATen

ATen PE1114A Manual

6 Juli 2025
ATen

ATen KN2116VA Manual

5 Juli 2025
ATen

ATen CL5708IN Manual

5 Juli 2025
ATen

ATen CS1144D4C Manual

26 Februar 2025
ATen

ATen CS1184DP Manual

26 Februar 2025
ATen

ATen CS1144D Manual

26 Februar 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer