AtomoSynth KOE-M6 Manual

AtomoSynth Ikke kategoriseret KOE-M6

Læs gratis den danske manual til AtomoSynth KOE-M6 (7 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 18 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 9.5 anmeldelser. Har du et spørgsmål om AtomoSynth KOE-M6, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/7

AtomoSynth Koe M6.

Analog semi modular synthesizer.

Thank you for purchasing the AtomoSynth, KOE M6 desktop edition. Analog semi modular

synthesizer. In order to enjoy long and trouble free use, please read this manual carefully and use the

instrument correctly. After reading this manual, please keep it for later reference.

Precautions

•Using the unit in the following locations can result in a malfunction.

•In direct sunlight.

•Locations of extreme temperature or humidity.

•Excessively dusty or dirty locations.

•Locations of excessive vibration.

•Close to magnetic fields.

•Please use the included power supply, if you are forced to replace it, use a 15V DC. 2A 5.5mm

barrel plug center positive power supply.

•To avoid breakage, do not apply excessive force to the switches or controls.

•If the exterior becomes dirty, wipe it with a clean, dry cloth.

•Do not use liquid cleaners such as benzene or thinner or cleaning compounds or flammable

polishes.

•Keep foreign matter out of your equipment

•Never set any container with liquid in it near this equipment. If liquid gets into the equipment, it

could cause a breakdown, fire, or electrical shock.

•Be careful not to let metal objects get into the equipment.

Basic operation:

•Connect the included power supply to mains and the power supply output to the Koe power

input.

•Turn on the unit by sliding the power switch to the right.

•Please avoid connecting the power supply to mains while the power switch is in the “on”

position (to the right).

•Connect the “AUDIO” output to your mixer or amplifier. Note that the audio output is not

intended to be used with headphones.

•Connect a voltage source (e.g. sequencer, keyboard)to the 1V/Oct input and a gate source to

the Gate input.

•If the Delay module does not start when the unit is turned on, disconnect any cable connected

to the Delay_CV input connector, turn off and then turn the unit on again.

MIDI channel configuration.

•Connect a midi controller (keyboard, sequencer, computer with a usb to midi adaptor) to the

“MIDI” input using the included breakout cable adaptor.

Produkt Specifikationer

Mærke:	AtomoSynth
Kategori:	Ikke kategoriseret
Model:	KOE-M6

Har du brug for hjælp?

Hvis du har brug for hjælp til AtomoSynth KOE-M6 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret AtomoSynth Manualer

AtomoSynth Tottem 2 Manual

23 August 2024

AtomoSynth KOE-M6 Manual

23 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Planet XGPN-100 Manual

15 Juni 2025

Proficook PC-EKA 1283 Manual

15 Juni 2025

OmniMount OBSP8 Manual

15 Juni 2025

Levenhuk FS10 Manual

15 Juni 2025

Vestil PM4-2148-LP Manual

15 Juni 2025

ElectriQ STRV-W1-B Manual

15 Juni 2025

Adler AD 4521 Manual

15 Juni 2025

AMX HydraPort HPX-AV102 Manual

15 Juni 2025

Hughes & Kettner Red Box Mk II Manual

15 Juni 2025

Hughes & Kettner Quantum QC 412 Manual

15 Juni 2025