Audac SP202 Manual

Audac Højttaler SP202

Læs gratis den danske manual til Audac SP202 (4 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 50 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 25.5 anmeldelser. Har du et spørgsmål om Audac SP202, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

PROFESSIONAL AUDIO EQUIPMENT

Bidirectional Sound Projector SP202

Installation Guide

Sound Projector

SP202

AUDAC

Introduction

The AUDAC SP202 is a Bidirectional and humidity proof sound projector with a high efficiency. It is

suitable for speech and music and ensures a powerful and high quality sound reproduction.

It features two 5” full range speakers and a built-in 100 Volt line transformer with four different power

taps, to be used in large 100V PA applications.

The enclosure is made of solid aluminum with a special weatherproof coating, and the mounting of the

speaker should be done by means of the aluminum mounting bracket. A 1.5m cable is provided for

connecting the loudspeaker.

Installation procedure

1) Before mounting the loudspeaker, make sure that the speaker can be mounted on a safe location and

can be easily aimed to the desired location. Also make sure that the mounting location (Wall / Ceiling)

is solid enough to support the weight of the loudspeaker.

2) The two bolts whereby the loudspeaker is attached to the U-

shaped mounting bracket are meant to focus the speaker into

the desired direction. You can loosen those bolts a bit for

focusing the speaker, and when it’s in the right position,

tighten the bolts again.

Notice that those bolts are locked inside the

loudspeakers body, and can’t be fully removed out of it.

3) The speaker should be mounted using the included U-shaped

mounting bracket. Depending on the mounting surface, the

appropriate fasteners should be used. (wood, concrete, steel, …).

The most simple method for mounting the loudspeaker is by

means of using hexagon bolts, and tightening them by

means of a ratchet wrench.

4) After the loudspeaker is mounted on the desired location, the connection cable can be cut on the

desired length and the connections can be made.

6 mm

29 mm29 mm

Produkt Specifikationer

Mærke:	Audac
Kategori:	Højttaler
Model:	SP202

Har du brug for hjælp?

Hvis du har brug for hjælp til Audac SP202 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Højttaler Audac Manualer

Audac MBK621A Manual

30 Juli 2025

Audac MBK622A Manual

30 Juli 2025

Audac MBK623A Manual

29 Juli 2025

Audac ARCHI10X Manual

7 Juli 2025

Audac CIRA530D Manual

6 Juli 2025

Audac CIRA524 Manual

5 Juli 2025

Audac CENA706 Manual

4 Juli 2025

Audac ATEO 6D Manual

29 Juni 2025

Audac BASSO112 Manual

6 Juni 2025

Audac BASSO118 Manual

4 Juni 2025

Højttaler Manualer

Nyeste Højttaler Manualer

Adam T7V Manual

12 September 2025

Klipsch Flexus SURR 100 Manual

12 September 2025

Klipsch Detroit Manual

12 September 2025

Adam A3X Manual

12 September 2025

Adam A7X Manual

12 September 2025

Focal 1000 IW6 Manual

12 September 2025

QSC SC-423C Manual

11 September 2025

QSC AcousticDesign AD-S282H Manual

11 September 2025

Monitor Audio Bronze 200 AV 5.1.2 Manual

11 September 2025

Focal 1000 IWLCR Utopia Manual

11 September 2025