Audac WS500 Manual

Audac Højttaler WS500

Læs gratis den danske manual til Audac WS500 (4 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 3.5 stjerner ud af 9 anmeldelser. Har du et spørgsmål om Audac WS500, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

PROFESSIONAL AUDIO EQUIPMENT

Design Wall Loudspeaker WS500

Installation Guide

Design Wall Loudspeaker

WS500

AUDAC

Installation procedure

1) Before mounting the loudspeaker, the front grill should be removed

to make the mounting holes accessible. The best method for

removing the front grill is to push the lower side of the front grill up

with your thumbs. The grill should easily slide up, without

performing large forces.

2) When the lower side of the grill is pushed upwards, the attachment

tabs on the bottom of the front grill should slide out of the

mounting slots. The lower side of the front grill can be popped

out. After this, the upper side can also be detached easily and the grill

can be removed.

3) After the grill is removed, the two mounting holes are visible. One

mounting hole is provided on the upper side, while the second mounting

hole is provided on the lower side of the loudspeaker.

4) Before mounting the loudspeaker, make sure that the speaker can be mounted on a safe location and

the mounting location is solid enough to support the weight of the loudspeaker.

5) Connect the terminals of the loudspeaker. More information about the connections can be found in

the “Connections” section of this manual.

6) After the connections are made, a screw should be provided on the desired mounting location of the

upper mounting hole. Once this screw is provided, the upper mounting hole should glide over the

mounting screw. The loudspeaker is now hanging on one single screw.

7) Now the second mounting hole can be drawn. It is located 25.5 cm lower than the first mounting hole.

8) When both mounting points are provided, both screws can be inserted and tightened.

9) When the loudspeaker is suspended with both mounting points and the connections are made, the

front grill can be placed again. This can be done by sliding the upper mounting tabs of the front grill

into the provided slots, and afterwards sliding the lower mounting tabs into the provided slots.

Produkt Specifikationer

Mærke:	Audac
Kategori:	Højttaler
Model:	WS500

Har du brug for hjælp?

Hvis du har brug for hjælp til Audac WS500 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Højttaler Audac Manualer

Audac BASSO112 Manual

6 Juni 2025

Audac BASSO118 Manual

4 Juni 2025

Audac MBK106V Manual

4 Juni 2025

Audac BASSO115 Manual

1 Juni 2025

Audac VEXO106 Manual

1 Marts 2025

Audac CIRA724I Manual

17 December 2024

17 December 2024

6 Oktober 2024

4 Oktober 2024

2 Oktober 2024

Højttaler Manualer

Nyeste Højttaler Manualer

LENRUE A2 Manual

15 Juni 2025

Sony BRAVIA Theatre Bar 6 Manual

15 Juni 2025

Hecate G1500 SE Manual

15 Juni 2025

Edifier MP330 Manual

15 Juni 2025

Hecate G1500 Manual

14 Juni 2025

XLEADER SoundAngel A8 Manual

14 Juni 2025

RCF DU 31EN Manual

14 Juni 2025

Omnitronic PS-2.5WB Manual

14 Juni 2025

Greadio R-919 Manual

14 Juni 2025

J.W. SPEAKER 8700 Evolution J2 Manual

14 Juni 2025