AudioControl TXJWB12 Manual


Læs gratis den danske manual til AudioControl TXJWB12 (20 sider) i kategorien Subwoofer. Denne vejledning er vurderet som hjælpsom af 33 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 17 anmeldelser. Har du et spørgsmål om AudioControl TXJWB12, eller vil du spørge andre brugere om produktet?

Side 1/20
INSTALLATION GUIDE
NOTE! Read this installation guide thoroughly before disassembling or modifying
the vehicle. Installation of this product requires technical skill, experience and
specialized tools. If in doubt, it’s recommended to have it professionally installed
by an authorized or Dealer.Stinger AudioControl
TXJWB12
A video installation guide is available at:
https://stingerelectronics.com/products/txjwb12
2
INSTALLATION NOTES
GETTING STARTED
The TXJWB12 is designed to mount to both Wrangler JK and Wrangler JL tailgates. There are two
different hardware packs included and this guide covers both types of mounting.
Remove the four Philips screws from the speaker and remove the speaker.
Set speaker and screws in a safe place.
Remove the JK Paper Template from inside the enclosure. Select the correct hardware pack for your
installation and conrm hardware quantities and tools required using the guides on the following pages.
For JK/JKU models equipped with a factory subwoofer on the right side of the cargo area, only
compatible if removed.
For JL models equipped with a Cargo TrailRail, the TrailRail will no longer be accessible with the
speaker enclosure installed.
For models equipped with a factory subwoofer, unplugging the factory subwoofer is recommended.
Some installation steps are more easily completed with a second person.
Speaker wire is required before the enclosure is mounted.
Recommended amplifier rating: 00- 00 watts @ 2ohms.2 6
1.1


Produkt Specifikationer

Mærke: AudioControl
Kategori: Subwoofer
Model: TXJWB12

Har du brug for hjælp?

Hvis du har brug for hjælp til AudioControl TXJWB12 stil et spørgsmål nedenfor, og andre brugere vil svare dig