KIRK BH-3 Manual

KIRK Kamerastativ BH-3

Læs gratis den danske manual til KIRK BH-3 (1 sider) i kategorien Kamerastativ. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om KIRK BH-3, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

Your variable tension knob is the small knob on the opposite

side of your main lock knob. To set the tension, you will need to

ﬁrst tighten the main lock knob tight ( ). Then tighten your Fig. 1

tension knob tight ( ). Remember clockwise to tighten and Fig. 2

counter-clockwise to loosen. Now you will need to loosen your

main lock knob all the way ( ). Now start to loosen your Fig. 3

tension knob ( ) until the amount of desired tension is set. Fig. 4

At this point all you will have to do its loosen and tighten the

main lock knob. If more tension is needed, simply tighten the

tension knob. And if less is needed, just loosen the knob.

Figure 1 Figure 2

Figure 3 Figure 4

The last knob is for your panning

base. This knob will lock the head

from rotating 360 degrees. Simply

turn the knob clockwise to

tighten and counterclockwise

to loosen. ( )Fig. 5

If you have any questions please call 260-665-3670

For custom mounting plates and ball head accessories,

please visit our website www.KirkPhoto.com

All knobs are captive, do not remove.

We recommend cleaning your head

every 4-6 weeks. To do this, loosen the

main control knob and the tension knob.

Move the ball into the 90 degree position.

Now with a cloth lightly moistened with

WD40 slowly turn the ball in the socket.

When you’re done with this process please

wipe off any excess WD40 with a clean

cloth. Also please avoid using any cleaner

other than WD40 and do not spray WD40 directly onto the

ball. You can purchase WD40 at your local hardware or

automotive store.

Figure 5

DIRECTIONS FOR KIRK

BH SERIES BALL HEADS

Congratulations on your purchase of your new

ball head. Using your new head is very simple.

Your ball head has three control knobs. Your main lock

knob is the largest of the three. To use this knob, simply

turn clockwise to tighten. To loosen, turn counter-clockwise

while applying a slight inward pressure.

Main Lock

Knob

Variable Tension

Knob

Panning Base

Knob

www.KirkPhoto.com

333 Hoosier Drive

Angola, IN 46703-9336

800-626-5074 • 260-665-3670

KirkPhoto@aol.com

Our Science Will Improve Your Art.

The Kirk-Manufactured Product Warranty

The quality of every product manufactured by Kirk Enterprises

is fully guaranteed to the original owner for ﬁve years from

purchase date. If a Kirk-manufactured product fails because

of a manufacturing or material defect, we will repair it or

replace it at our option.

Please call Kirk Customer Support at 260-665-3670

Monday through Friday before returning any product.

Manufacturer’s Warranties & Repairs

All products sold by Kirk Enterprises carry the full

Manufacturer’s Warranty, including those specially

modiﬁed by Kirk, such as certain tripods and ball heads.

Call Kirk Customer Support at 260-665-3670

Monday through Friday for more information.

Produkt Specifikationer

Mærke:	KIRK
Kategori:	Kamerastativ
Model:	BH-3

Har du brug for hjælp?

Hvis du har brug for hjælp til KIRK BH-3 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Kamerastativ KIRK Manualer

KIRK BH-3 Manual

5 November 2025

Kamerastativ Manualer

Nyeste Kamerastativ Manualer

GVM -D190 Manual

4 November 2025

GVM -S170 Manual

4 November 2025

Bee Star BEAM 100 Manual

1 November 2025

Manfrotto 504HD Manual

30 Oktober 2025

SteadiCam M-1 Manual

30 Oktober 2025

SteadiCam Volt Manual

30 Oktober 2025

Flycam Equator 3-Axis Manual

17 Oktober 2025

Flycam HD-5000 Manual

16 Oktober 2025

Gitzo Systematic GT4553S Manual

15 Oktober 2025

Gitzo Carbon Fiber GM4552L Manual

15 Oktober 2025