Audiolab 7000A Manual

Audiolab Hi-Fi system 7000A

Læs gratis den danske manual til Audiolab 7000A (22 sider) i kategorien Hi-Fi system. Denne vejledning er vurderet som hjælpsom af 36 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 18.5 anmeldelser. Har du et spørgsmål om Audiolab 7000A, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/22
User Manual
7000A
SEL MODE VOL
1: Important Safety Information
This lightning flash with an arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of non-insulated “dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to constitute a
risk of electric shock.
Warning: To reduce the risk of electric shock, do not remove the cover (or back) as
there are no user-serviceable parts inside. Refer servicing to qualified personnel.
The exclamation point within an equilateral triangle is intended to alert the user to
the presence of important operating and maintenance instructions in the literature
accompanying the appliance.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any ventilation openings. Install under the manufacturer’s
instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding plug has
two blades and a third grounding prong. The wide blade or the third prong is
provided for your safety. If the provided plug does not fit into your outlet, consult
an electrician for the replacement of the obsolete outlet.
Protect the power cord from being stepped on or pinched, particularly at the plugs,
convenience receptacles, and at the point where they exit from the apparatus.
Unplug this apparatus during lightning storms or when unused for long periods.
Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power supply cord or plug is
damaged, liquid has been spilt or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.
CAUTION: These servicing instructions are for use by qualified service personnel
only. To reduce the risk of electric shock, do not perform any servicing other than
that contained in the operating instructions unless you are qualified to do so.
Do not install this equipment in a confined or built-in space such as a bookcase or
similar unit, and keep well ventilated in an open space. The ventilation should not
be impeded by covering the ventilation openings with items such as newspaper,
tablecloths, curtains etc.
WARNING: Only use attachments/accessories specified or provided by the
manufacturer (such as the exclusive supply adapter, battery etc).
WARNING: Please refer to the information on the exterior panel of the enclosure
for electrical and safety information before installing or operating the apparatus.
WARNING: To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture. The apparatus shall not be exposed to dripping or
splashing and objects filled with liquids, such as vases, shall not be placed on the
apparatus.
WARNING: For the terminals marked with the symbol “ ” may be of sufficient
magnitude to constitute a risk of electric shock. The external wiring connected to
the terminals requires installation by an instructed person or the use of
ready-made leads or cords.
WARNING: No naked flame sources, such as lighted candles, should be placed on
the apparatus.
WARNING: Attention should be drawn to the environmental aspects of battery
disposal.
WARNING: Use of the apparatus in tropical climates.
THE FUSE VALUES ARE:
220 – 240V (UK, China, etc.) T3.15AL 250V Slow Blow
100 – 120V (USA, Japan, etc.) T6.3AL 250V Slow Blow
Ground protection terminal. This product should be connected to a
power outlet with ground protection.
Apparatets stikprop skal tilsluttes en stikkontakt med jord, som giver
forbindelse til stikproppens jord.
Laite on liitettävä suojakoskettimilla varustettuun pistorasiaan.
Apparatet må tilkoples jordet stikkontakt.
Apparaten skall anslutas till jordat uttag.
Denmark:
Finland:
Norway:
Sweden:
System Operations
Menu Options Specifications
Important
Safety Information Contents Getting Started Controls and Functions Remote Handset W nty earra Coverag
Connections

Produkt Specifikationer

Mærke: Audiolab
Kategori: Hi-Fi system
Model: 7000A

Har du brug for hjælp?

Hvis du har brug for hjælp til Audiolab 7000A stil et spørgsmål nedenfor, og andre brugere vil svare dig


Hi-Fi system Audiolab Manualer

Audiolab

Audiolab 7000N Play Manual

4 August 2024
Audiolab

Audiolab 9000CDT Manual

3 August 2024
Audiolab

Audiolab 7000CDT Manual

3 August 2024
Audiolab

Audiolab 7000A Manual

2 August 2024
Audiolab

Audiolab M-DAC Manual

24 Juli 2024
Audiolab

Audiolab 6000N Play Manual

30 April 2024
Audiolab

Audiolab 8200MB Manual

16 Marts 2024
Audiolab

Audiolab M-DAC+ Manual

18 Februar 2024
Audiolab

Audiolab 8200AP Manual

27 November 2023
Audiolab

Audiolab 8200Q Manual

25 September 2023

Hi-Fi system Manualer

Nyeste Hi-Fi system Manualer

Musical Fidelity

Musical Fidelity M6x TT Manual

14 Juni 2025
Musical Fidelity

Musical Fidelity X-Tube Manual

14 Juni 2025
Musical Fidelity

Musical Fidelity MX Stream Manual

13 Juni 2025
Korg

Korg handytraxx tube Manual

13 Juni 2025
Fantech

Fantech SNIPER 7.1 HG16 Manual

8 Juni 2025
Fantech

Fantech WHG04 Manual

8 Juni 2025
Fantech

Fantech CAPTAIN 7.1 HG10 Manual

8 Juni 2025
Fantech

Fantech FUSION HG22 Manual

8 Juni 2025
Fantech

Fantech HEXAGON HG21 Manual

8 Juni 2025
LG

LG LF-M330A Manual

8 Juni 2025