Audiolab 8300CD Manual

Audiolab Ikke kategoriseret 8300CD

Læs gratis den danske manual til Audiolab 8300CD (16 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 29 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 15 anmeldelser. Har du et spørgsmål om Audiolab 8300CD, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/16
User Instructions
8300CD
8300CD.indd 1 2015-6-12 11:04:41
one wider than the other. A grounding plug has two
blades and a third grounding prong. The wide blade or
the third prong is provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched
particularly at the plugs, convenience receptacles, and at
the point where they exit from the apparatus.
Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or
sold with the apparatus. When a cart or rack
is used, use caution when moving the cart/
apparatus combination to avoid injury from
tip-over.
Unplug this apparatus during lightning storms or when
unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
CAUTION: These servicing instructions are for use by
qualified service personnel only. To reduce the risk of
electric shock, do not perform any servicing other than
that contained in the operating instructions unless you are
qualified to do so.
Do not install this equipment in a confined or built-in
space such as a bookcase or similar unit, and keep well
ventilated in open space. The ventilation should not be
impeded by covering the ventilation openings with items
such as newspaper, table-cloths, curtains etc.
WARNING: Only use attachments/accessories specified or
provided by the manufacturer (such as the exclusive supply
adapter, battery etc).
WARNING: Please refer to the information on the exterior
panel of the enclosure for electrical and safety information
before installing or operating the apparatus.
WARNING: The battery (battery or batteries or battery
pack) shall not be exposed to excessive heat such as
sunshine, fire or the like.
CAUTION: Danger of explosion if battery is incorrectly
replaced. Replace only with the same or equivalent type.
This label tells you that the unit
co nta in s a l ase r co mp one nt .
Opening the unit will expose the
user to radiation from the laser
beam.
Mains Supply: The mains operating voltage of Audiolab
8300 series units is shown on the rear panel. If this voltage
does not match the mains voltage in your area, consult
your Audiolab dealer about converting the unit.
The mains supply fuse on the rear panel is accessible when
the IEC mains plug has been removed. In the rare event
that it has broken, check for any obvious cause before
replacing the fuse with one of the correct rating and type.
The fuse values are:
220 – 240V (UK, China, etc.) T1AL 250V Slow Blow
100 – 120V (USA, Japan, etc.) T1.6AL 250V Slow Blow
1: Important Safety Information
AVIS: RISQUE DE CHOC ELECTRIQUE-NE PAS
OUVRIR WARNING: SHOCK HAZARD-DO NOT OPEN
This lightning flash with arrowhead symbol within an
equilateral triangle is intended to alert the user to the
presence of non-insulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock.
Warning: To reduce the risk of electric shock, do not
remove cover (or back) as there are no user-serviceable
parts inside. Refer servicing to qualified personnel.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance instructions in the literature
accompanying the appliance.
IMPORTANT SAFETY INFORMATION
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
Page 1
8300CD.indd 2 2015-6-12 11:04:41

Produkt Specifikationer

Mærke: Audiolab
Kategori: Ikke kategoriseret
Model: 8300CD

Har du brug for hjælp?

Hvis du har brug for hjælp til Audiolab 8300CD stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Audiolab Manualer

Audiolab

Audiolab 8300CDQS Manual

5 September 2024
Audiolab

Audiolab 8300CD Manual

2 September 2024
Audiolab

Audiolab M-DAC nano Manual

2 September 2024
Audiolab

Audiolab DC Block Manual

3 April 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Vulcan

Vulcan VBP15SL Manual

17 September 2025
Rocktrail

Rocktrail IAN 463536 Manual

17 September 2025
Kimo

Kimo KNT 320 Manual

17 September 2025
Vestil

Vestil LPRO-36-16-4 Manual

17 September 2025
Vestil

Vestil CPC-20 Manual

17 September 2025
Vestil

Vestil UNI-4048-4-BLU-230-1 Manual

17 September 2025
Vestil

Vestil CANT-3648 Manual

17 September 2025
InLine

InLine 16277S Manual

17 September 2025
Vestil

Vestil H-75-LD Manual

17 September 2025
Fulgor Milano

Fulgor Milano P1B 5343 QU Manual

17 September 2025