AudioQuest PowerQuest 2 Manual


Læs gratis den danske manual til AudioQuest PowerQuest 2 (7 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 42 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 21.5 anmeldelser. Har du et spørgsmål om AudioQuest PowerQuest 2, eller vil du spørge andre brugere om produktet?

Side 1/7
PowerQuest
.~
I
USER
MANUAL!
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0000000000000000000000000000000
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
PowerQuest
~
N oN-SAcR1FIC1AL suRGE
PRoncroR
FLINEAR
1LT£R
Introduction
Thank you for purchasing AudioQuest's PowerQuest 2 Power
Conditioner/
Surge Protector. Our Linear power filtration removes
distortion and does
so
far more effectively and consistently than typical power conditioners. This assures dramatically improved
performance. Unlike traditional surge surge protectors, non-sacrificial suppression prevents high voltage and current from
damaging your equipment and ensures your
PQ-2
won't
wear
out
or
fail over time.
See
and hear everything
as
it
was
intended
with
PowerQuest.
Safety Information I Warnings
Before operating the
PQ-2,
please read and and these observe all safety operating instructions. Retain instructions for future
reference.
Do
not
disassemble
or
in any way modify the
PQ-2.
There are no user-serviceable parts inside.
Keep away from moisture and avoid excessive humidity.
Do
not
allow liquids or foreign objects
to
enter the unit.
audioquest
~
Servicing I Return
to
AudioQuest
Servicing
of
the
PQ-2
must be performed by AudioQuest, and
is
only required when:
The
PQ-2
has
been exposed
to
rain, flooding,
or
extreme moisture.
The
PQ-2
does
not
appear
to
operate normally.
(See
"Trouble-Shooting Guide:')
The
PQ-2
has
been dropped and sustained considerable physical damage.
If
sending the
PQ-2
to
AudioQuest for servicing (or shipping
it
for any reason), please
use
bubble wrap or other professional
packaging materials
so
that
it
may arrive safely.
If
you have
to
send the
unit
to
us
and have questions regarding
the
packaging
requirements
or
best practices, please contact AudioQuest.
Power Source
Ideally,
the
power source
to
which the
PQ-2
is
connected should be adequate for
use
at
120VAC
single-phase nominal voltage,
15
amps (current capacity
RMS).
However, the
PQ-2
will operate very well
with
a
120VAC
20-amp service outlet.
For proper operation, the
PQ-2
requires a safety ground (supplied via the power
utility
AC
wall outlet).
Installation
Wall and Detachable
Base
Mounting
Options
1. There are mounting holes on the back
of
the surge protector for wall or baseboard mounting.
To
help
with
the installation, we've
included a simple drill template. Position the template in the location where you would like
to
mount
the
PQ-2.
With the template
in place,
use
a pencil, pen, or marker
to
accurately mark the
mounting
holes before drilling. Once the holes have been marked,
remove the template.
2.
Install screws (not included) on wall
or
baseboard surface (leaving at least¼"
of
the screw exposed) . .
3.
Place
and secure the
PQ-2
on
the
mounted screws
as
you
would
hang a picture frame on a nail.
4.
The
PQ-2
features
both
a a slim profile and rugged floor-mounting base
that
makes
it
ideal for
mounting
behind cabinets.
Installation
is
simple: Insert the rectangular tabs into the corresponding slots on the
PQ-2's
underside. Slide
the
base
to
move
the
tabs into place. (The base will only slide when correctly oriented.) With the tabs in place,
press
the lock
button
f2l
to
secure the
base
onto
the unit. Power cords plug straight
down
to
the
AC
outlets, making installation trouble-free. For shelf mounting,
the
floor-mounting base
can
be easily removed. Simply
press
the unlock
button~,
slide
the
base
to
release the tabs from
the
slots,
and remove the base from the unit.
FRONT
BACK
Push
to
unlock
Specifications
Extreme Voltage Shutdown:
140VAC
-Will activate the main power circuit relay
to
open
within
less
than 0.25 seconds; automatically
resets once the incoming power
is
within
a
safe
range.
Differential-Mode Noise Dissipation: In
excess
of
22d8 reduction from 30kHz-1
GHz.
Filter linearized for dynamic (rising) line impedance
with
frequency from
0.05
Ohms (source) and
10
to
50 Ohm load, (system current
dependent).
Input
Current
Maximum
Capacity:
15
amps
RMS
USB
Charge Capacity: 2 x -Ports Total capacity
3.4
Amps
Signal Line Protection: Coaxial (Cable/Satellite)
Weight: 4.85 lbs.
Dimensions: 15.47" L x
3.1
S"W x 6.02" H


Produkt Specifikationer

Mærke: AudioQuest
Kategori: Ikke kategoriseret
Model: PowerQuest 2

Har du brug for hjælp?

Hvis du har brug for hjælp til AudioQuest PowerQuest 2 stil et spørgsmål nedenfor, og andre brugere vil svare dig