AudioSource Sound pOp 2 Manual

AudioSource Højttaler Sound pOp 2

Læs gratis den danske manual til AudioSource Sound pOp 2 (1 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 13 personer og har en gennemsnitlig bedømmelse på 4.1 stjerner ud af 7 anmeldelser. Har du et spørgsmål om AudioSource Sound pOp 2, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

Sound pOp 2 Owner’s Manual 8100.SOUNDPOP2

Congratulations on your purchase of the AudioSource®

Sound pOp 2™

Bluetooth Speaker – the latest in mobile

audio technology. Please retain this document for further

reference and take a few moments to read this entire

manual.

Please read and observe all instruction.

NOTE: if any part of this product is damaged or missing,

please call your dealer or AudioSource® directly at

1.877.715.5439

Please read your warranty and retain your receipt

and original carton for possible future use.

For more information about AudioSource® electronics,

speakers, and accessories, please visit

www.audiosource.net

Speciﬁcations

Bluetooth version 4.0, Class 2

HFP v1.6, HD Voice, A2DP, AVRCP

mSBC codec for High Quality Audio

IPX4 rated water resistance

Noise Cancellation/Echo Reduction for clear calls

1.5” High deﬁnition/High eﬃciency driver

500mAH UL listed battery (up to 8 hours play time)

Charge using any USB port

Silicone rubber case

TPR (Thermoplastic Rubber) suction cup

Dimensions: 2.87”H, 2.65”D

Package Contents:

• Sound pOp 2™ Bluetooth Wireless Speaker

• USB Charging Cable

• Ins

truction Manual

Features

USB Charging Sources

Bluetooth Wireless Sources

Getting Started

Charging Sound pOp 2™

1. Plug included USB cable into the micro

USB port on the back of Sound pOp 2™.

2. Connect USB cable to a USB port on a

computer or USB power adaptor. Status

Indicator LED will light solid once Sound pOp 2™

is connected to a power source.

3. Charge Sound pOp 2™ fully. This will take

approximately 3-4 hours. Status Indicator LED will

not appear once Sound pOp 2™ is fully charged.

4. Sound Once pOp 2™ Soundis fully charged, pOp 2™ is

ready to pair with your Bluetooth device.

Pairing Sound pOp 2™

1. Press Power On Button for 5 seconds,

y.Status Indicator LED will ﬂash quickl

2. Turn on the Bluetooth feature on your mobile

device or Computer. Enable device discovery

if not automatically enabled.

3. Search and select “

Sound pOp 2

” in the list on

your device. Note: Some devices may

require a pass code. Please use 0000 if prompted.

4. Status Indicator LED will ﬂash slowly once paired

and connected.

Sound pOp 2™

is now ready to play music from

your Bluetooth device.

6. To turn oﬀ

Sound pOp 2™

, press the Power On/Oﬀ

button for 5 seconds.

In Case of Trouble

1. Ensure Sound pOp 2™ Sound Op 2™ is fully charged, p will

not be able to pair if

Sound pOp 2™ is not charged.

Turn Sound pOp oﬀ and retry “Pairing Sound pOp 2™.” 2™

3. Ensure Bluetooth is enabled on your device and retry

“Pairing Sound pOp 2™.”

4. Move Sound pOp closer to your Bluetooth device and

retry “Pairing Sound pOp 2™.”

5. Try pairing

Sound pOp 2™ with a diﬀerent Bluetooth device.

6. Sound pOp 2™ will not be able to pair if currently paired to

a device (Status Indicator LED will ﬂash slowly). Try

unpairing with other devices and retry “Pairing Sound

pOp 2™.”

For urtherF Assistance

Please visit our website at www.audiosource.net

or contact our customer service department at

support@audiosource.net or call us at 1.877.715.5439

Limited Warranty

AudioSource, a division of Peak Audio Group, warrants this product against defects in materials and workmanship for a limited period of time. For a period of 90

days from date of original purchase, we will repair or replace the product, at our option, without charge for parts. The limited warranty period for factory

refurbished products expires after ninety (90) days from date of original purchase. This limited warranty applies only to purchases from authorized AudioSource

Retailers or Distributors. This limited warranty is extended only to the original purchaser and is valid only to consumers in the United States.

Consumers are required to provide a copy of the original sales invoice from an authorized AudioSource Retailer or Distributor when making a claim against this

limited warranty. This limited warranty only covers failures due to defects in materials or workmanship that occur during normal use. It does not cover failures

resulting from accident, ﬁre, ﬂood, misuse, abuse, neglect, mishandling, missapplication, alteration, faulty installation, modiﬁcation, service by anyone other

than AudioSource, or damage that is attributable to Acts of God. It does not cover costs of transportation to AudioSource or damage in transit. The customer

should return their defective product, freight prepaid and insured, to AudioSource only after receiving a Return Authorization.

Repair or replacement under the terms of this warranty does not extend the term of this warranty. Should a product prove to be defective in workmanship or

material, the consumer’s sole remedies will be repair or replacement as provided under the terms of this warranty. If the defective product is discontinued

AudioSource may replace the product with an equivalent or superior product at its option. Under no circumstances shall AudioSource be liable for loss or

damage, direct, consequential or incidental, arising out of the use of or inability to use the product. There are no express warranties other than described above.

13970 SW 7 Ave, P OR 972232nd ortland,

www.audiosource.net

1. Status Indicator LED: solid – charging

uick ﬂash– pairing mode

low ﬂash – paired to a device

2. Power On/Oﬀ Button

3. Plus Button: short push/tap – volume up

long push/hold – track forward

4. Microphone

5. Phone Button: short push/tap – play/pause and accept/end call

long push/hold – dial most recent in call log

6. Minus Button: short push/tap – v