Auray CFC-68 Manual

Auray Ikke kategoriseret CFC-68

Læs gratis den danske manual til Auray CFC-68 (6 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om Auray CFC-68, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

Cable Replacement Kit

CFC Series

Owner’s Manual

for CFP Series Carbon Fiber Boom Poles

Introduction

Thank you for choosing Auray.

The Auray CFC replacement kit provides a

replacement cable for the Auray CFP carbon ﬁber

boom pole. Auray’s solderless design provides a

fast and easy solution for cable replacement.

The high-quality coiled cable features a right-angle

XLR connector manufactured by Neutrik®, and a

TA3 (mini XLR) connector manufactured by Rean®

(a registered trademark of Neutrik®) for secure

locking connections and ﬂawless signal transfer.

This cable also features Auray’s unique strain relief

system that absorbs tension and protects the cable

from damage at the edge of the tip exit and at the

T3 connector. The included hex key and a small

slotted screwdriver (not included) are the only tools

needed for this cable replacement procedure that

will assure long-lasting and trouble-free operation

of your CFP boom pole.

Right-angle

XLR connector

TA3 (mini XLR)

connector

Coiled XLR

cable

Tip strain relief

Nylon line

1.5 mm hex

key

Replacing the Cable – Boom Pole with

Bottom Exit XLR

Remove the old cable

1. Use the hex key to

loosen the set screw

on the tip. 1

2. Remove the tip by

unscrewing it. 2

3. Lift the cable and

strain relief out of the

tip exit slot. 3

Tip: Before

proceeding, push a

small length of cable

into the tube from the

tip of the pole. This

will give you enough

slack to complete the

following steps.

4. Unscrew the bottom

housing from the base

of the boom pole. 4

5. Unscrew the plastic

TA3 strain relief. 5

6. Disconnect the TA3

connector by pressing

on the locking tab and

gently removing the

connector from the

mount.

Note: The TA3

connector should

easily disconnect. Do

not force or pull on the

cable to disconnect

it. Doing so could

damage the housing

or the connector.

7. Use a small slotted

screwdriver to reach

inside the strain

relief and depress the

locking tab of the TA3

connector. 6 With the

locking tab depressed,

you can slide the

strain relief over the

TA3 connector and

o of the cable. Set

the strain relief piece

aside.

Alternative: Use a wire cutter to snip the cable

at the base of the TA3 connector. Remove the

strain relief, and set it aside.

Important: Once you have performed this step,

the cable will be unusable. If you plan on using

the cable again at a later point, don’t proceed

with this alternative step.

8. Remove the cable by pulling it out from the

top of the pole.

Instructions

Produkt Specifikationer

Mærke:	Auray
Kategori:	Ikke kategoriseret
Model:	CFC-68

Har du brug for hjælp?

Hvis du har brug for hjælp til Auray CFC-68 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Auray Manualer

Auray SVRK-4U-S Manual

15 Juni 2025

Auray SVRK-12U-D Manual

15 Juni 2025

Auray SVRK-6U-D Manual

14 Juni 2025

Auray SVRK-6U-S Manual

14 Juni 2025

Auray SVRK-9U-S Manual

4 April 2025

Auray SVRK-9U-D Manual

4 April 2025

Auray ABP-35N Manual

14 November 2024

Auray CFP-68R Manual

14 November 2024

Auray BA-LPR3 Manual

13 November 2024

Auray SB-52SSB Manual

9 November 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Playtive IAN 300004 Manual

16 Juni 2025

Playtive IAN 321241 Manual

16 Juni 2025

Cleveland 24CEA10 Manual

16 Juni 2025

Hughes & Kettner Redbox Pro Manual

16 Juni 2025

Playtive IAN 279576 Manual

16 Juni 2025

Playtive IAN 321903 Manual

16 Juni 2025

Wahoo RPM Cadence Manual

16 Juni 2025

Playtive IAN 359564 Manual

16 Juni 2025

Playtive IAN 272426 Manual

16 Juni 2025

Playtive IAN 321236 Manual

16 Juni 2025