Auray CFP-ET5 Manual

Auray Ikke kategoriseret CFP-ET5

Læs gratis den danske manual til Auray CFP-ET5 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 32 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 16.5 anmeldelser. Har du et spørgsmål om Auray CFP-ET5, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

CFP-ET Series

Carbon Fiber

Extension Tubes

for CFP-Series Boom Poles

Owner’s Manual

Extension tube

accessory for use

with Auray CFP-

series boom poles.

Manufactured with

sturdy, lightweight

carbon ﬁber for

portability and

reliability.

Integrated cable

with high-quality

TA3 (mini XLR)

connectors

manufactured by

Rean® (a registered

trademark of

Neutrik®).

www.AurayAudio.com

Adding an Extension – Boom Pole with

Side-Exit XLR

1. Unscrew the side exit housing,

and

move the plastic strain relief cap so that

the TA3 connector inside the housing is

exposed.

2. Disconnect the TA3 connector by pressing

on the locking tab and gently removing the

connector from the mount.

Note: The TA3 connector should easily

disconnect. Do not force or pull on the

cable to disconnect it. Doing so could

damage the housing or the connector.

3. Use a small slotted screwdriver to reach

inside the strain relief and depress the

locking tab of the TA3 connector. With the

locking tab depressed, you can slide the

strain relief over the TA3 connector and o

of the cable.

Set the strain relief piece

aside.

4. Connect the male TA3 connector of the

included cable to the female TA3 connector

of the coiled cable of the boom pole.

5. Snake the included cable through the

extension tube.

6. Screw the extension tube onto the end of

the boom pole.

7. Fit the narrow side of the strain relief over

the TA3 connector, and push it past the

TA3 connector’s locking tab.

8. Plug the TA3 connector into the bottom

housing by inserting it into the TA3 mount

and pushing in until it clicks.

Note: When properly aligned, the TA3

connector will easily slide into place.

Do not try to force the connector into

the mount. Doing so could damage the

connector or the mount.

9. Push the strain relief all the way into the

side exit housing so it sits over the TA3

connector.

10. Screw the side exit housing onto the end of

the boom pole.

Auray is a registered trademark of the

GG2

Produkt Specifikationer

Mærke:	Auray
Kategori:	Ikke kategoriseret
Model:	CFP-ET5

Har du brug for hjælp?

Hvis du har brug for hjælp til Auray CFP-ET5 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Auray Manualer

Auray MSB-6 Manual

29 September 2025

Auray SP-L8 Manual

31 August 2025

Auray SP-M6 Manual

31 August 2025

Auray RM-MCLED Manual

6 Juli 2025

Auray SVRK-4U-S Manual

15 Juni 2025

Auray SVRK-12U-D Manual

15 Juni 2025

Auray SVRK-6U-D Manual

14 Juni 2025

Auray SVRK-6U-S Manual

14 Juni 2025

Auray BAC-4A4HB Manual

4 April 2025

Auray SVRK-9U-S Manual

4 April 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Iogear GCS1908W Manual

30 Oktober 2025

Reflecta 23295 Manual

30 Oktober 2025

Calorex Delta DT 4 Manual

30 Oktober 2025

Abus HUD-Y ACE PURE Manual

30 Oktober 2025

Krups FDK442 Manual

30 Oktober 2025

Iogear GCS62HDPKIT Manual

30 Oktober 2025

Eliminator Lighting E 107 Manual

30 Oktober 2025

Segway eScooter E150S Manual

30 Oktober 2025

Phoenix Gold ZD-VOL4 Manual

30 Oktober 2025

Olimpia Splendid Bi2 SLIR NAKED Manual

30 Oktober 2025