Autel MaxiSys MS919S2 Manual

Autel Ikke kategoriseret MaxiSys MS919S2

Læs gratis den danske manual til Autel MaxiSys MS919S2 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 6 anmeldelser. Har du et spørgsmål om Autel MaxiSys MS919S2, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

All information, specifications and illustrations in this manual are

based on the latest information available at the time of printing.

Autel reserves the right to make changes at any time without notice.

No part of this manual may be reproduced, stored in a retrieval

system or transmitted, in any form or by any means, electronic,

mechanical, photocopying, recording, or otherwise, without the

prior written permission of Autel.

Indicates a potentially hazardous situation which,

if not avoided, could result in death or serious injury to the

operator or to bystanders.

The safety messages herein cover situations Autel is aware

of. Autel cannot know, evaluate or advise you as to all of the

possible hazards. You must be certain that any condition or

service procedure encountered does not jeopardize your

personal safety.

When an engine is operating, keep the service

area WELL VENTILATED or attach a building exhaust

removal system to the engine exhaust system. Engines

produce carbon monoxide, an odorless, poisonous gas that

causes slower reaction time and can lead to serious

personal injury or loss of life.

Autel

, MaxiSys

, and MaxiDAS

are trademarks of Autel

Intelligent Technology Corp., Ltd., registered in China, the United

States and other countries. All other marks are trademarks or

registered trademarks of their respective holders.

For technical assistance in all other markets, please contact your

selling agent.

Safety messages are provided to help prevent personal injury and

equipment damage. All safety messages are introduced by a

signal word indicating the hazard level.

For your own safety and the safety of others, and to prevent

damage to the equipment and vehicles upon which it is used, it is

important that the safety instructions presented throughout this

manual be read and understood by all persons operating or

coming into contact with the equipment.

There are various procedures, techniques, tools, and parts for

servicing vehicles, as well as in the skill of the individual doing the

work. Because of the vast number of test applications and

variations in the products that can be tested with this instrument,

we cannot possibly anticipate or provide advice or safety

messages to cover every situation.

It is the automotive technician’s responsibility to be knowledgeable

of the system being tested. It is essential to use proper service

methods and test procedures. It is important to perform tests in

an appropriate and acceptable manner that does not endanger

your safety, the safety of others in the work area, the equipment

being used, or the vehicle being tested.

Before using the equipment, always refer to and follow the safety

messages and applicable test procedures provided by the

manufacturer of the vehicle or equipment being tested. Use the

equipment only as described in this manual. Read, understand,

and follow all safety messages and instructions in this manual.

Always perform automotive testing in a safe environment.

Wear safety eye protection that meets ANSI standards.

Indicates an imminently hazardous situation

which, if not avoided, could result in death or serious injury

to the operator or to bystanders.

Keep clothing, hair, hands, tools, test equipment, etc.

away from all moving or hot engine parts.

Operate the vehicle in a well ventilated work area, for

exhaust gases are poisonous.

Put the transmission in PARK (for automatic transmission)

or NEUTRAL (for manual transmission) and make sure the

parking brake is engaged.

Put blocks in front of the drive wheels and never leave the

vehicle unattended while testing.

Be extra cautious when working around the ignition coil,

distributor cap, ignition wires and spark plugs. These

components create hazardous voltages when the engine is

running.

Keep a fire extinguisher suitable for gasoline, chemical, and

electrical fires nearby.

Do not connect or disconnect any test equipment while the

ignition is on or the engine is running.

Keep the test equipment dry, clean, free from oil, water or

grease. Use a mild detergent in a clean cloth to clean the

outside of the equipment as necessary.

Do not drive the vehicle and operate the test equipment at

the same time. Any distraction may cause an accident.

Refer to the service manual for the vehicle being serviced

and adhere to all diagnostic procedures and precautions.

Failure to do so may result in personal injury or damage to

the test equipment.

To avoid damaging the test equipment or generating false

data, make sure the vehicle battery is fully charged and the

connection to the vehicle DLC is clean and secure.

Do not place the test equipment on the distributor of the

vehicle. Strong electro-magnetic interference can damage

the equipment.

support@autel.com

1-855-288-3587 (North America)

+86 (0755) 8614-7779 (China)

IMPORTANT SAFETY INSTRUCTION

6. Speaker

7. Collapsible Stand — extends from the back to

allow hands-free viewing of the tablet

8. Camera Flash

9. Rear Camera

MAXISYS MS919S2

1. 11-inch TFT-LCD Capacitive Touchscreen

2. Ambient Light Sensor — detects ambient brightness

3. Power LED

4. Front Camera

5. Microphone

10. Headphone Jack

11. USB Port

12. USB Port

13. Mini SD Card Slot

14. HDMI (High-Definition Multimedia Interface) Port

15. Type-C Charging Port

16. DC Power Supply Input Port

17. Power/Lock Button — long press to turn on & off the

tablet, or short press to lock the screen

The MaxiSys system has two main components:

MaxiSys Tablet — the central processor and monitor

for the system

MaxiFlash VCMI2 — the vehicle communication and

measurement interface

MaxiSys Tablet

10 12 13 14 15 1611

Produkt Specifikationer

Mærke:	Autel
Kategori:	Ikke kategoriseret
Model:	MaxiSys MS919S2

Har du brug for hjælp?

Hvis du har brug for hjælp til Autel MaxiSys MS919S2 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Autel Manualer

Autel MaxiSYS MS908S Pro Manual

12 September 2025

Autel MaxiEV BCE100 Manual

12 September 2025

Autel AutoLink AL549 Manual

3 August 2025

Autel MaxiAP AP2500E Manual

3 August 2025

Autel Care Premium Manual

3 August 2025

Autel MaxiAP AP2500 Manual

2 August 2025

Autel MAXISYS MS908CV II Manual

2 August 2025

Autel MaxiDiag MD906 Pro Manual

26 Juli 2025

Autel MaxiSys MS906 Pro2-TS Manual

25 Juli 2025

Autel MaxiSys MS909S2 Manual

25 Juli 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

T'nB MHMECA Manual

18 September 2025

Marmitek BoomBoom 55 HD Manual

18 September 2025

CTA Digital PAD-HFS Manual

18 September 2025

Vestil ATP-C-2436 Manual

18 September 2025

Active Intent Play GSBV16T Manual

18 September 2025

Vestil D-33-MD Manual

18 September 2025

Vestil LAD-13-14-P Manual

18 September 2025

Cambro VBRTHD6110 Manual

18 September 2025

Vicoustic VicFix Base Manual

18 September 2025

Vestil LAD-10-14-P Manual

18 September 2025