2 www.AvantcoEquipment.com
177W62 177W62BLK 177W62GLD 177W62GRN 177W62RD 177W62SS
Voltage 120V 120V 120V 120V 120V 120V
Color Silver Black Gold Green Red Stainless Steel
WARNING! All power must be disconnected at power source before any service procedure is performed.
1. This appliance is hot when in use. To avoid burns, do not let bare skin touch hot surfaces.
Keep combustible materials, such as drapes and other furnishings, away from appliance.
2. Extreme caution is necessary when any appliance is used by or near children and whenever the appliance
3. Always unplug appliance when not in use and before cleaning, adjusting or maintaining this machine.
To disconnect appliance, turn switch off and remove plug from power source.
4. Do not operate any appliance with a damaged cord or plug, after the appliance malfunctions, has been
dropped or damaged. Return appliance to an authorized service facility for examination, electrical or
mechanical adjustment or repair.
5. Do not use outdoors. This appliance is not intended for wet or moist locations. Never locate appliance where it may
6. Connect to properly grounded outlets only. Avoid the use of extension cords. Do not run cord under carpeting
or runners. Arrange cord away from traffic area and where it will not create a tripping hazard.
7. This appliance is equipped with a power cord that has a three blade plug. Plug ONLY into a matching
three blade outlet. DO NOT cut or break off the third blade or attempt to use with a two blade extension cord.
8. To prevent a possible fire, it is recommended that the unit is placed on a non-combustible surface.
9. This appliance has electrical parts. Do not use in areas where gasoline, paint, or flammable liquids are used or stored.
1. Please read instructions before using this appliance.
2. When using electrical appliances, basic precautions should always be followed to reduce the risk of fire,
electric shock, or injury.
3. Clean machine thoroughly before and after each use following the cleaning instructions provided below.
Plug warmer into a grounded outlet with correct voltage and sufficient power capacity. Refer to the product label (serial
plate) on the warmer for voltage and wattage requirements.
