Avanti HRS88N1B Manual

Avanti Overvågningskamera HRS88N1B

Læs gratis den danske manual til Avanti HRS88N1B (3 sider) i kategorien Overvågningskamera. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 9 anmeldelser. Har du et spørgsmål om Avanti HRS88N1B, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/3
MODEL HRS88N1B
SECURITY SAFE
INSTALLATION AND USAGE INSTRUCTIONS
Your Avanti Room Security Safe is supplied with the following:
1 – Security Safe Unit
2 – Emergency Access Keys
1 – Installation / Usage Guide
4 – 1.5V Batteries
1 – Felt Liner
Installation Screws
4 – Rubber Feet
INSTALLING YOUR SECURITY SAFE
When installing your safe, be sure the location is sturdy enough to support the unit and is both
secure and easy to access.
Safe can be installed onto either a concrete or wooden surface.
When installing use a 25/64” (10mm) drill bit and screws.
To prevent removal of your security safe, it is recommended to use Allen type screws (not included)
to affix the unit to the installation location.
INITIAL SETUP AND CONFIGURATION.
After you have installed the unit in its final location, proceed to set up digital access controls.
1) Using the emergency Access Key, open the safe.
2) Open the battery compartment cover.
3) Following the image shown in the battery compartment install 4 AA sized batteries.
4) Close the battery compartment cover.
5) The words “ALL READY” will be displayed on the LCD display for approximately 1 second; the
security safe will then go into “STANDBY Mode”.
6) Once in “STANDBY Mode” the LCD display will show the date and time (YY, MM, DD).
7) Using the keypad, enter the initial setup password “1234” or the administrator password
“8888”.
NOTE:
Battery Life / Level indicator The battery indicator on the LCD display will show the current status :
of the batteries. Always replace all of the batteries at the same time. If at any time the battery level
is too low to operate the security safe, use the emergency access key.
Safety / Security Feature: If the passcode is entered incorrectly more than 3 times the keypad will
go into lock mode. After approximately (5) five minutes the keypad will return to normal working
function.
Interior Light: When the safe is unlocked using the keypad, the interior light will turn on and will
turn off automatically after approximately 45 seconds.
Automatic Door Opening: When the safe is unlocked using the keypad the door will automatically
open slightly outward to allow easy / quick access to contents stored in the safe.
RESE TTING THE ADMINISTRATOR PASSWORD
To reset the access code read and follow the steps below.
1) With the door open, press the “#” key to activate the keypad, then press the “0” key twice, then
press the “red” button on the battery compartment once to enter the programming mode.
2) Once in the programming mode you will hear a “DI” sound and “- - - -“ will be shown in the LCD
display.
3) Enter the new 4 – 8 administrator password and press the “#” key to confirm.
4) The word “INTO” will show on the LCD display to confirm the new password has been set
successfully.
GUEST / USER CODE SETUP
To reset the access code read and follow the steps below.
1) With the door open, enter a new 4 – 8 digit code and press the “#” key to confirm the new pass code.
2) You will hear and see the security lock engage and the word “CLOSE” will be displayed on the LCD
screen.
3) Enter the new pass code and press the “#” key again to open the security safe. The security lock will
disengage and the word “OPEN” will be displayed on the LCD screen.
4) Close the door and enter the new code set up in step # 1 and press the “#” key. The word “CLOSE”
will be displayed on the LCD screen and the security lock will engage.
5) If the Guest / User enters the wrong pass code three (3) times in a row the keypad will go into
security-lock mode and will remain locked for approximately (5) five minutes. After the (5) five
minutes has elapsed the keypad will return to normal operation.
Avanti Products
Miami, FL 33172
In the event of service issues, please call the
Customer Hotline at 1-800 220 5570– -

Produkt Specifikationer

Mærke: Avanti
Kategori: Overvågningskamera
Model: HRS88N1B

Har du brug for hjælp?

Hvis du har brug for hjælp til Avanti HRS88N1B stil et spørgsmål nedenfor, og andre brugere vil svare dig


Overvågningskamera Avanti Manualer

Avanti

Avanti HRS88N1B Manual

10 August 2024

Overvågningskamera Manualer

Nyeste Overvågningskamera Manualer

Elro

Elro CC40RXX Manual

31 Juli 2025
Elro

Elro CI5000 Manual

31 Juli 2025
Elro

Elro CZ40RIPS Manual

31 Juli 2025
FLIR

FLIR ioi HD CB-5222 Manual

30 Juli 2025
Eufy

Eufy Cam S3 Pro Manual

30 Juli 2025
Telycam

Telycam Vision+ 4KN 30X Manual

30 Juli 2025
Marshall Electronics

Marshall Electronics CV630-BI Manual

30 Juli 2025
Telycam

Telycam Vision+ SE Manual

30 Juli 2025
FLIR

FLIR Ariel CC-3405 Manual

29 Juli 2025
FLIR

FLIR Ariel CM-3505 Manual

29 Juli 2025