Axis 250S MPEG-2 Video Server Manual

Axis Server 250S MPEG-2 Video Server

Læs gratis den danske manual til Axis 250S MPEG-2 Video Server (57 sider) i kategorien Server. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 11 anmeldelser. Har du et spørgsmål om Axis 250S MPEG-2 Video Server, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/57

AXIS 250S MPEG-2 Video Server

User’s Manual

AXIS COMMUNICATIONS

<Product Name> Quick User’s Guide

AXIS 250S User’s Manual

About This Manual

This manual is intended for administrators and operators

of the AXIS 250S MPEG-2 Video Server, and is applicable

for firmware release 3.02. Later versions of the document

will be posted to the Axis Web site, as required.

Previous experience of networking will be of use to the

reader when installing and using this product. Some

knowledge of UNIX or Linux-based systems would also be

beneficial, for developing custom programming scripts

and applications.

Safety Notices Used in This Manual

Caution! - Indicates a potential hazard that can damage

the product.

Important! - Indicates a hazard that can seriously impair

operation.

Do not proceed beyond any of the above notices until you

have fully understood the implications.

Legal Considerations

Camera surveillance may be prohibited by laws that vary

from country to country. Check the laws in your local

region before using the AXIS 250S for surveillance.

The AXIS 250S includes 3 viewer licenses. The

installation of more than 3 instances of the viewer is

prohibited. To purchase further licenses, please contact

your Axis reseller.

Intellectual Property Rights

Axis AB has intellectual property rights relating to

technology embodied in the product described in this

document. In particular, and without limitation, these

intellectual property rights may include one or more of

the patents listed at http://www.axis.com/patent.htm and

one or more additional patents or pending patent

applications in the US and other countries.

Electromagnetic Compatibility (EMC)

This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there is

no guarantee that interference will not occur in a

particular installation.

If this equipment does cause harmful interference to radio

or television reception, which can be determined by

turning the equipment off and on, the user is encouraged

to try to correct the interference by one or more of the

following measures: Re-orient or relocate the receiving

antenna. Increase the separation between the equipment

and receiver. Connect the equipment into an outlet on a

circuit different from that to which the receiver is

connected. Consult the dealer or an experienced radio/TV

technician for help. Shielded (STP) network cables must be

used with this unit to ensure compliance with EMC standards.

USA - This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to Part 15

of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation.

Europe - The AXIS 250S fulfills the requirements for

radiated emission according to limit B of EN55022:1998.

When using the Line input, the AXIS 250S also meets the

requirements for immunity according to EN55024:1998

residential, commercial, and light industry. The Mic input may

be subject to interference from nearby radio transmissions.

For best performance, use the Line input.

Liability

Every care has been taken in the preparation of this manual.

Please inform your local Axis office of any inaccuracies or

omissions. Axis Communications AB cannot be held responsible

for any technical or typographical errors and reserves the right

to make changes to the product and manuals without prior

notice. Axis Communications AB makes no warranty of any

kind with regard to the material contained within this

document, including, but not limited to, the implied warranties

of merchantability and fitness for a particular purpose. Axis

Communications AB shall not be liable nor responsible for

incidental or consequential damages in connection with the

furnishing, performance or use of this material.

Trademark Acknowledgments

Acrobat, Adobe, Boa, Ethernet, IBM, Internet Explorer, LAN

Manager, Linux, Macintosh, Microsoft, Netscape Navigator,

OS/2, UNIX, Windows, WWW are registered trademarks of the

respective holders. Java and all Java-based trademarks and

logos are trademarks or registered trademarks of Sun

Microsystems, Inc. in the United States and other countries.

Axis Communications AB is independent of Sun

Microsystems Inc.

Axis Support Services

Visit the Axis Support Web at www.axis.com/techsup/

AXIS 250S MPEG-2 Video Server User’s

Manual.

Revision 1.1

Part no: 20221

Dated: March 2003

2002-2003

Produkt Specifikationer

Mærke:	Axis
Kategori:	Server
Model:	250S MPEG-2 Video Server

Har du brug for hjælp?

Hvis du har brug for hjælp til Axis 250S MPEG-2 Video Server stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Server Axis Manualer

20 August 2024

20 August 2024

20 August 2024

20 August 2024

20 August 2024

20 August 2024

20 August 2024

Axis S1048 Mk II Manual

19 August 2024

Axis M7011 10 Pack Manual

19 August 2024

Axis Q7404 Manual

19 August 2024

Server Manualer

Nyeste Server Manualer

15 Juni 2025

7 Juni 2025

1 Juni 2025

9 Marts 2025

9 Marts 2025

9 Marts 2025

Supermicro SuperServer 6028TR-HTR Manual

30 Januar 2025

Supermicro SuperServer 6019U-TR4 Manual

30 Januar 2025

IoSafe 224+ Manual

23 Januar 2025

IoSafe 1520+ Manual

23 Januar 2025