Bang And Olufsen Beocom 1401 Manual

Bang And Olufsen Telefon Beocom 1401

Læs gratis den danske manual til Bang And Olufsen Beocom 1401 (2 sider) i kategorien Telefon. Denne vejledning er vurderet som hjælpsom af 40 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 20.5 anmeldelser. Har du et spørgsmål om Bang And Olufsen Beocom 1401, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

BeoCom 1401

RINGING SIGNAL

BeoCom 1401 has 10 different settings

of the ringing signal, combined from 3

levels and 3 melodies, and the tone

ringer disconnected.

SETTING THE RINGING SIGNAL

Press Enter

Press

Press 0-9 to select the setting of your

choice.

Press Enter

When the ringing signal is disconnected

(setting 0), it is automatically reconnected

the first time you lift off the handset and

place it in the base again.

ADJUSTING THE VOLUME

During a call, you can adjust the

handset volume in 5 steps by pressing

the + –and buttons. All calls start at

the medium volume level.

Press +to increase the volume.

Press –to decrease the volume.

REDIALING

Press Rdl to call the last number

called.

Telephone numbers exceeding 31 digits

cannot be redialed.

In order to ensure that the last number

is stored and can be redialed, the

handset must be placed in the base (or

press the switch off key on the lower

side of the handset) for at least 1

second.

MICROPHONE

Press to mute the microphone.

A beep signal in the handset indicates

that the microphone is muted.

Press to connect the microphone.

Please note! Pressing other keys one

or two times will connect the micro-

phone as well.

MEMORY

BeoCom 1401 memorizes 10 tele-

phone numbers which can be stored

under the code numbers from 0 to 9.

Numbers of up to 21 digits can be

memorized.

PLEASE NOTE!

If the telephone is disconnected from

the line for more than 1 hour,

numbers stored in the memory may

be erased. This may also happen

when using a computer modem or

another telephone on the same line.

STORING PHONE NUMBERS

Press Enter

Press Mem

Enter the code number (0-9)

Enter the phone number

Press Enter

DIALING A STORED NUMBER

Press Mem

Enter the code number (0-9)

DELETING A STORED NUMBER

A stored number is deleted by storing

a new number under the same code

number.

WALL HOLDER

The package contains a wall holder

that consists of one faceplate which

holds the handset and a choice of

two backplates which attach to the

wall.

The wider backplate is designed to fit

over the wall phone jack. It will slide

down and snap into place over the

pegs on the wall phone jack.

There are tabs inside this backplate

that allow for excess cord to be

wrapped inside the backplate. If you

wrap the cord clockwise then lead

the cord out in the bottom left

channel of the holder and if you

wrap the cord counterclockwise, then

lead the cord out in the bottom right

channel.

The faceplate will then slide down

and lock into place over the clips on

the backplate.

The narrow backplate is designed to

be screwed into the wall if no wall

phone jack is available. Please see the

enclosed instructions for details.

Beocom

Vol

Mem

Enter

ABC DEF

GHI

PQRS

JKL

TUV

MNO

WXYZ

Rdl

Vol

Flash

Slow

Normal

Fast

Disconnected

Low

Medium

High

ACCESSORIES

THE TABLE BASE

The table base has 4 rubber feet. Each

foot can be tipped up which allows

the cord to be led out in the direction

of your choice.

The cover plate can be tilted to rest

on the tabletop. Under the cover

plate there is a note pad and a

directory for your stored phone

numbers.

PLACEMENT AND CLEANING

Do not place the telephone in very

dusty or dirty surroundings. Do not

expose it to excessive moisture.

Clean the telephone with a soft,

damp cloth dipped in water mixed

with a few drops of mild detergent.

TECHNICAL SPECIFICATIONS

Power supply from the telephone

network

Ambient temperatures -25oC - +55oC

Relative humidity 15% - 95%

Visit our website on:

www.bang-olufsen.com

3500727 0301 Version 1.0

INDUSTRY CANADA WARNINGS

Notice:

The Industry Canada Label identifies certified

equipment. This certification means that the

equipment meets telecommunications

network protective, operational and safety

requirements as prescribed in the

appropriate Terminal Equipment Technical

Requirements document(s). The Department

does not guarantee the equipment will

operate to the user’s satisfaction.

Before installing this equipment, users

should ensure that it is permissible to be

connected to the facilities of the local

telecommunications company. The

equipment must also be installed using an

acceptable method of connection. The

customer should be aware that compliance

with the above conditions may not prevent

degradation of service in some situations.

Repairs to certified equipment should be

coordinated by a representative designated

by the supplier. Any repairs or alterations

made by the user to this equipment, or

equipment malfunctions, may give the

telecommunications company cause to

request the user to disconnect the

equipment.

Users should ensure for their own protection

that the electrical ground connections of the

power utility, telephone lines and internal

metallic water pipe system, if present, are

connected together. This precaution may be

particularly important in rural areas.

Caution: Users should not attempt to make

such connections themselves, but should

contact the appropriate electric inspection

authority, or electrician, as appropriate.

Notice: The Ringer Equivalence Number

(REN) assigned to each terminal device

provides an indication of the maximum

number of terminals allowed to be

connected to a telephone interface. The

termination on an interface may consist of

any combination of devices subject only to

the requirement that the sum of the Ringer

Equivalence Number of all the devices does

not exceed 5.

If you have any doubts or questions

concerning the telephone, please do not

hesitate to contact your retailer.

Hearing aid Compatibility:

This telephone

IS HEARING AID COMPATIBLE

BeoCom 1401

Produkt Specifikationer

Mærke:	Bang And Olufsen
Kategori:	Telefon
Model:	Beocom 1401

Har du brug for hjælp?

Hvis du har brug for hjælp til Bang And Olufsen Beocom 1401 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Telefon Bang And Olufsen Manualer

Bang And Olufsen BeoCom 2 Manual

5 August 2024

Bang And Olufsen Beoline Manual

28 Juli 2024

Bang And Olufsen BeoCom 2100 Manual

27 Juli 2024

Bang And Olufsen Beotalk 1200 Manual

25 Juli 2024

Bang And Olufsen BeoCom 4 Manual

24 Juli 2024

Bang And Olufsen Beoline 2 Manual

20 Februar 2024

Bang And Olufsen Beocom 1600 Manual

27 Juli 2023

Bang And Olufsen Beocom 1401 Manual

22 Februar 2023

Bang And Olufsen Beocom 2000 Manual

21 December 2022

Bang And Olufsen Serene Manual

25 November 2022

Telefon Manualer

Nyeste Telefon Manualer

Yealink SIP-T31W Manual

30 Juli 2025

Nokia 105 Classic Manual

30 Juli 2025

HMD 105 Pure Manual

30 Juli 2025

HMD 101 4G Manual

30 Juli 2025

Thomson 512263 Manual

27 Juli 2025

Panasonic KX-TGDA63 Manual

26 Juli 2025

Panasonic KX-TGDA99 Manual

26 Juli 2025

Panasonic KX-TGE610 Manual

26 Juli 2025

Panasonic KX-TGDA83 Manual

26 Juli 2025

Panasonic KX-TGDA66 Manual

26 Juli 2025