BDI Kronos 6729 Manual

BDI Bureau Kronos 6729

Læs gratis den danske manual til BDI Kronos 6729 (10 sider) i kategorien Bureau. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om BDI Kronos 6729, eller vil du spørge andre brugere om produktet?

Side 1/10
Designed by Matthew Weatherly.
These distinctive product configurations are protected by US and international patents, trade dress, and/or
copyright laws. Kronos & BDI are trademarks of Becker Designed, Inc. All rights reserved. ©2017, BDI
Made in China. 09.25.2017 v3
T2 4mm Hex Wrench
T3 Phillip screwdriver
C7 Modesty Panel x 1
A2 Drawer x 1
C4 Keypad x 1
C5 Power Cord x 1
C3 Control Module x 1
A1 Main Panel with
Hutch x 1
C1 Leg x 2
C2 Foot x 2
bdiusa.com
customerservice@bdiusa.com
KRONOS® 6752
LIFT DESK
H5 1/4-20 x 15mm Screw x 4
H2 #6 Wood Screw x 6
H3 M6 x 15mm Screw x 12
Product Registration
Registering your new BDI product allows us to send you important
product updates, service information and helpful hints related to your
BDI products. Register today, and you will be entered to win free a BINK
table from BDI: www.bdiusa.com/register
Placement and Maintenance
Kronos® Lift Desk is designed for indoor use on level floors. Clean steel,
laminate, and veneered surfaces with a moist cloth.
Your Kronos Office furniture is engineered for easy assembly. Carefully ®
follow this procedure to prevent any damage. Do not use power tools
for assembly of this product.
Step 1
Unpack and identify the parts listed below. The assembly workspace
should be a non-marring surface such as carpet. For missing hardware
pieces, please contact BDI Customer Service at
customerservice@bdiusa.com. For all other concerns, please contact
your BDI retailer. H7 Leveler x 4
H10 1/4-20 x 60mm Screw x 4
C8 Brackets x 2
H6 Wire clip x 6
H1 10mm Wood Screw x 2
H11 18mm Wood Screw x 2
T1 5mm Hex Wrench
H4 M6 x 16mm Screw x 8
C6 Cord Conduit x 1
OWNER’S MANUAL
bdiusa.com
customerservice@bdiusa.com
KRONOS 6752
LIFT DESK
2
Step 2 - Install Control Module and Keypad
Lay main panel with hutch upside down using packing material to support the front of the desk. Attach A1
Keypad C4 on the desired side (left or right) with 2 wood screws using Phillips screwdriver. Orient the conH1 -
trol module so that the keypad plug is facing the keypad side and secure between the 2 steel rails with 2 C3
wood screws as shown. Route the keypad cord into the groove in the panel and through the hole in the H11
metal frame.
Step 3 - Connect keypad cord into the Control Module port labeled and bundle the slack with the hook HS
and loop tie.
Step 4 - Secure the keypad cord into the groove using 6 cord clips and 6 wood screws using Phillips H6 H2
screwdriver.
User’s left
hand side
User’s right
hand side
C3
C4
H11 x 2
H1 x 2
H2 x 6
H6 x 6
Support desk with
packing materials
to protect the top
edge of the hutch
C3
H11
C4
H1


Produkt Specifikationer

Mærke: BDI
Kategori: Bureau
Model: Kronos 6729

Har du brug for hjælp?

Hvis du har brug for hjælp til BDI Kronos 6729 stil et spørgsmål nedenfor, og andre brugere vil svare dig