BeamZ BAC406 151.304 Manual

BeamZ Effekt maskine BAC406 151.304

Læs gratis den danske manual til BeamZ BAC406 151.304 (69 sider) i kategorien Effekt maskine. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 4.1 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om BeamZ BAC406 151.304, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/69
BAC406 ProPar 6x18W 6-1 HEX DMX IR
Ref. nr.: 151.304
INSTRUCTION MANUAL
GEBRUIKSAANWIJZING
GEBRAUCHSANLEITUNG
MANUAL DE INSTRUCCIONES
MANUEL D'INSTRUCTIONS
V2.0
2
ENGLISH
Congratulations to the purchase of this Beamz fixture. Please read this manual thoroughly prior to using the unit in order to
benefit fully from all features.
Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to
avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical shock.
Keep the manual for future reference.
- Prior to using the unit, please ask advice from a
specialist. When the unit is switched on for the first time,
some smell may occur. This is normal and will disappear
after a while.
- The unit contains voltage carrying parts. Therefore do
NOT open the housing.
- Do not place metal objects or pour liquids into the unit
This may cause electrical shock and malfunction.
- Do not place the unit near heat sources such as
radiators, etc. Do not place the unit on a vibrating
surface. Do not cover the ventilation holes.
- The unit is not suitable for continuous use.
- Be careful with the mains lead and do not damage it. A
faulty or damaged mains lead can cause electrical shock
and malfunction.
- When unplugging the unit from a mains outlet, always
pull the plug, never the lead.
- Do not plug or unplug the unit with wet hands.
- If the plug and/or the mains lead are damaged, they
need to be replaced by a qualified technician.
- If the unit is damaged to such an extent that internal
parts are visible, do NOT plug the unit into a mains outlet
and DO NOT switch the unit on. Contact your dealer. Do
NOT connect the unit to a rheostat or dimmer.
- To avoid fire and shock hazard, do not expose the unit to
rain and moisture.
- All repairs should be carried out by a qualified technician
only.
- Connect the unit to an earthed mains outlet (220-
240Vac/50Hz) protected by a 10-16A fuse.
- During a thunderstorm or if the unit will not be used for a
longer period of time, unplug it from the mains. The rule
is: Unplug it from the mains when not in use.
- If the unit has not been used for a longer period of time,
condensation may occur. Let the unit reach room
temperature before you switch it on. Never use the unit in
humid rooms or outdoors.
- During operation, the housing becomes very hot. Do not
touch it during operation and immediately after.
- To prevent accidents in companies, you must follow the
applicable guide lines and follow the instructions.
- Secure the unit with an extra safety chain if the unit is
ceiling mount. Use a truss system with clamps. Make
sure nobody stands in the mounting area. Mount the
effect at least 50cm away from inflammable material and
leave at least 1 meter space on every side to ensure
sufficient cooling.
- This unit contains high intensity LEDs. Do not look into
the LED light to prevent damage to your eyes.
- Do not repeatedly switch the fixture on and off. This
shortens the life time.
- Keep the unit out of the reach of children. Do not leave
the unit unattended.
- Do not use cleaning sprays to clean switches. The
residues of these sprays cause deposits of dust and
grease. In case of malfunction, always seek advice from
a specialist.
- Only operate the unit with clean hands.
- Do not force the controls.
- If the unit has fallen, always have it checked by a
qualified technician before you switch the unit on again.
- Do not use chemicals to clean the unit. They damage the
varnish. Only clean the unit with a dry cloth.
- Keep away from electronic equipment that may cause
interference.
- Only use original spares for repairs, otherwise serious
damage and/or dangerous radiation may occur.
- Switch the unit off prior to unplugging it from the mains
and/or other equipment. Unplug all leads and cables
prior to moving the unit.
- Make sure that the mains lead cannot be damaged when
people walk on it. Check the mains lead before every use
for damages and faults!
- The mains voltage is 220-240Vac/50Hz. Check if power
outlet match. If you travel, make sure that the mains
voltage of the country is suitable for this unit.
- Keep the original packing material so that you can
transport the unit in safe conditions
This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient
magnitude to cause a shock hazard.
This mark attracts the attention of the user to important instructions that are contained in the manual and that he should
read and adhere to.
DO NOT LOOK DIRECTLY INTO THE LENS. This can damage your eyes. Persons who are subject to epileptic attacks
should be aware of the effects that this light effect may have on them.
The unit has been certified CE. It is prohibited to make any changes to the unit. They would invalidate the CE certificate and
their guarantee!
NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/ °F 41 and
35 95°C/ °F.
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your
dealer about the way to proceed. The specifications are typical. The actual values can slightly change from one unit to the other.
Specifications can be changed without prior notice.

Produkt Specifikationer

Mærke: BeamZ
Kategori: Effekt maskine
Model: BAC406 151.304

Har du brug for hjælp?

Hvis du har brug for hjælp til BeamZ BAC406 151.304 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Effekt maskine BeamZ Manualer

BeamZ

BeamZ PS6W 151.262 Manual

14 Januar 2025
BeamZ

BeamZ S553L Manual

5 Januar 2025
BeamZ

BeamZ SparkleWall 151.201 Manual

8 Oktober 2024
BeamZ

BeamZ LUCID 1.2 150.462 Manual

2 Oktober 2024
BeamZ

BeamZ Mini 153.325 Manual

30 September 2024
BeamZ

BeamZ BPP200 151.231 Manual

29 September 2024
BeamZ

BeamZ Apollo Manual

27 September 2024
BeamZ

BeamZ SlimPar 30UV Manual

17 September 2024
BeamZ

BeamZ COB50 Manual

16 September 2024
BeamZ

BeamZ Disco Set 151.250 Manual

16 September 2024

Effekt maskine Manualer

Nyeste Effekt maskine Manualer

ColorKey

ColorKey PartyBar Go Manual

27 Februar 2025
Froggy's Fog

Froggy's Fog Fobbles-F3 Manual

25 Februar 2025
Froggy's Fog

Froggy's Fog Boreas Cube C6 Manual

25 Februar 2025
Froggy's Fog

Froggy's Fog Boreas S4 Manual

25 Februar 2025
Froggy's Fog

Froggy's Fog Hyperion D4 Manual

25 Februar 2025
Froggy's Fog

Froggy's Fog Fobbles F4 Manual

25 Februar 2025
Froggy's Fog

Froggy's Fog Poseidon A6 Manual

25 Februar 2025
Froggy's Fog

Froggy's Fog Titan H4 Manual

25 Februar 2025
Froggy's Fog

Froggy's Fog Titan HT6 Manual

25 Februar 2025
Froggy's Fog

Froggy's Fog Titan 1500 DMX Manual

25 Februar 2025