BeamZ Pango 2500 Manual

BeamZ Effekt maskine Pango 2500

Læs gratis den danske manual til BeamZ Pango 2500 (16 sider) i kategorien Effekt maskine. Denne vejledning er vurderet som hjælpsom af 23 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 12 anmeldelser. Har du et spørgsmål om BeamZ Pango 2500, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/16
Pango 1250 / 2500 Analog laser RGB
Ref. nr.: 152.982 / 152.979
INSTRUCTION MANUAL
GEBRUIKSAANWIJZING
GEBRAUCHSANLEITUNG
MANUAL DE INSTRUCCIONES
MANUEL D'INSTRUCTIONS
V1.3
2
ENGLISH
Congratulations to the purchase of this Beamz product. Please read this manual thoroughly prior to using the unit in
order to benefit fully from all features.
Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all
precautions to avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to
avoid electrical shock. Keep the manual for future reference.
- Prior to using the unit, please ask advice from a
specialist. When the unit is switched on for the first
time, some smell may occur. This is normal and will
disappear after a while.
- The unit contains voltage carrying parts. Therefore do
NOT open the housing.
- Do not place metal objects or pour liquids into the unit
This may cause electrical shock and malfunction.
- Do not place the unit near heat sources such as
radiators, etc. Do not place the unit on a vibrating
surface. Do not cover the ventilation holes.
- The unit is not suitable for continuous use.
- Be careful with the mains lead and do not damage it.
A faulty or damaged mains lead can cause electrical
shock and malfunction.
- When unplugging the unit from a mains outlet, always
pull the plug, never the lead.
- Do not plug or unplug the unit with wet hands.
- If the plug and/or the mains lead are damaged, they
need to be replaced by a qualified technician.
- If the unit is damaged to such an extent that internal
parts are visible, do NOT plug the unit into a mains
outlet and DO NOT switch the unit on. Contact your
dealer. Do NOT connect the unit to a rheostat or
dimmer.
- To avoid fire and shock hazard, do not expose the
unit to rain and moisture.
- All repairs should be carried out by a qualified
technician only.
- Connect the unit to an earthed mains outlet (220-
240Vac/50Hz) protected by a 10-16A fuse.
- During a thunderstorm or if the unit will not be used
for a longer period of time, unplug it from the mains.
The rule is: Unplug it from the mains when not in use.
- If the unit has not been used for a longer period of
time, condensation may occur. Let the unit reach
room temperature before you switch it on. Never use
the unit in humid rooms or outdoors.
- During operation, the housing becomes very hot. Do
not touch it during operation and immediately after.
- To prevent accidents in companies, you must follow
the applicable guide lines and follow the instructions.
- Secure the unit with an extra safety chain if the unit is
ceiling mount. Use a truss system with clamps. Make
sure nobody stands in the mounting area. Mount the
effect at least 50cm away from inflammable material
and leave at least 1 meter space on every side to
ensure sufficient cooling.
- This unit contains high intensity LEDs. Do not look
into the LED light to prevent damage to your eyes.
- Do not repeatedly switch the fixture on and off. This
shortens the life time.
- Keep the unit out of the reach of children. Do not
leave the unit unattended.
- Do not use cleaning sprays to clean switches. The
residues of these sprays cause deposits of dust and
grease. In case of malfunction, always seek advice
from a specialist.
- Only operate the unit with clean hands.
- Do not force the controls.
- If the unit has fallen, always have it checked by a
qualified technician before you switch the unit on
again.
- Do not use chemicals to clean the unit. They damage
the varnish. Only clean the unit with a dry cloth.
- Keep away from electronic equipment that may cause
interference.
- Only use original spares for repairs, otherwise
serious damage and/or dangerous radiation may
occur.
- Switch the unit off prior to unplugging it from the
mains and/or other equipment. Unplug all leads and
cables prior to moving the unit.
- Make sure that the mains lead cannot be damaged
when people walk on it. Check the mains lead before
every use for damages and faults!
- The mains voltage is 220-240Vac/50Hz. Check if
power outlet match. If you travel, make sure that the
mains voltage of the country is suitable for this unit.
- Keep the original packing material so that you can
transport the unit in safe conditions
This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient
magnitude to cause a shock hazard.
This mark attracts the attention of the user to important instructions that are contained in the manual and that he should
read and adhere to.
DO NOT LOOK DIRECTLY INTO THE LENS. This can damage your eyes. Persons who are subject to epileptic attacks
should be aware of the effects that this light effect may have on them.
The unit has been certified CE. It is prohibited to make any changes to the unit. They would invalidate the CE certificate and
their guarantee!
NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/ °F 41 and
35 95°C/ °F.
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your
local authorities or your dealer about the way to proceed.

Produkt Specifikationer

Mærke: BeamZ
Kategori: Effekt maskine
Model: Pango 2500

Har du brug for hjælp?

Hvis du har brug for hjælp til BeamZ Pango 2500 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Effekt maskine BeamZ Manualer

BeamZ

BeamZ PS6W 151.262 Manual

14 Januar 2025
BeamZ

BeamZ S553L Manual

5 Januar 2025
BeamZ

BeamZ SparkleWall 151.201 Manual

8 Oktober 2024
BeamZ

BeamZ LUCID 1.2 150.462 Manual

2 Oktober 2024
BeamZ

BeamZ Mini 153.325 Manual

30 September 2024
BeamZ

BeamZ BPP200 151.231 Manual

29 September 2024
BeamZ

BeamZ Apollo Manual

27 September 2024
BeamZ

BeamZ SlimPar 30UV Manual

17 September 2024
BeamZ

BeamZ COB50 Manual

16 September 2024
BeamZ

BeamZ Disco Set 151.250 Manual

16 September 2024

Effekt maskine Manualer

Nyeste Effekt maskine Manualer

ColorKey

ColorKey PartyBar Go Manual

27 Februar 2025
Froggy's Fog

Froggy's Fog Fobbles-F3 Manual

25 Februar 2025
Froggy's Fog

Froggy's Fog Boreas Cube C6 Manual

25 Februar 2025
Froggy's Fog

Froggy's Fog Boreas S4 Manual

25 Februar 2025
Froggy's Fog

Froggy's Fog Hyperion D4 Manual

25 Februar 2025
Froggy's Fog

Froggy's Fog Fobbles F4 Manual

25 Februar 2025
Froggy's Fog

Froggy's Fog Poseidon A6 Manual

25 Februar 2025
Froggy's Fog

Froggy's Fog Titan H4 Manual

25 Februar 2025
Froggy's Fog

Froggy's Fog Titan HT6 Manual

25 Februar 2025
Froggy's Fog

Froggy's Fog Titan 1500 DMX Manual

25 Februar 2025