Bebob V200micro Manual


Læs gratis den danske manual til Bebob V200micro (5 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Bebob V200micro, eller vil du spørge andre brugere om produktet?

Side 1/5
bebob factory GmbH Höglwörtherstr. 350 – D-81379 München Tel.: +49 89 27818282
www.bebob.de
April 2020
Features
A high capacity battery which is compact and lightweight. Direct fitting to a camera via V-
Mount.
Five-step LED power indicator (100% - 80% - 60% - 40% - 20%).
Safety instructions
Only for professional use! Keep batteries out of reach of children and personnel that has
not been instructed in the use of high capacity Lithium-ion batteries!
Use only with recommended charger.
Keep the battery dry and do not immerse in water.
Never open the case of the battery.
Do not expose to temperature over 60°C.
Do not expose the battery to fire! May explode if thrown into fire!
Maximum Load 16.0A.
Do not put the battery on a device when the red charging LED flashes.
Handle with care! Do not throw! Do not drop!
V200micro rechargeable li-ion Battery
User Manual
WE STRONGLY RECOMMEND THAT YOU
READ THIS INSTRUCTION BEFORE USING
YOUR BEBOB V200MICRO BATTERY!
PLEASE KEEP THIS MANUAL FOR FUTURE
REFERENCE
bebob factory GmbH Höglwörtherstr. 350 – D-81379 München Tel.: +49 89 27818282
www.bebob.de
April 2020
Charging
Never leave batteries unattended while charging
Wait 30 Minutes after discharge before you put the battery on a charger.
The bebob V200micro battery can be charged with an external bebob charger (or
equivalent) with Lithium-ion (Li-ion) charging ability.
Approximate charge time may vary depending on charger and temperature.
bebob V200micro can be charged in ambient temperature for optimum performance at
10°C - 30°C.
bebob V200micro batteries can be recharged in any charge condition.
Discharging
Maximum load is 16.0A. When using the battery with video or lighting equipment, power
consumption of the equipment must be 16.0A or below. For the protection of the battery, a
load of 16.0A or over may activate the internal protection circuit and stop supply of power.
In this case the status led will turn red.
The battery can be used in ambient temperature of - 20°C - + 55°C.
Camera Data Communication
Blue leds: Arri/Sony Data Protocol
Red leds: Red Data Protocol
To switch between both status, press the Check button for 5s
Status led
Status led lighting Green: Full Capacity over 70% of New
Status led lighting Yellow: Full Capacity between 50% and 70% of New
Status led lighting Red: Full Capacity under 50% of New
Flash Light
To switch On/Off press the Check Button Twice


Produkt Specifikationer

Mærke: Bebob
Kategori: Ikke kategoriseret
Model: V200micro

Har du brug for hjælp?

Hvis du har brug for hjælp til Bebob V200micro stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Bebob Manualer

Bebob

Bebob V200micro Manual

28 September 2025
Bebob

Bebob S1MICRO Manual

30 August 2025
Bebob

Bebob VGN4 Manual

20 Februar 2025
Bebob

Bebob VGN8MICRO Manual

20 Februar 2025
Bebob

Bebob B480Cine Manual

20 Februar 2025
Bebob

Bebob AS2 Manual

11 December 2024
Bebob

Bebob V240micro Manual

10 December 2024
Bebob

Bebob VS8MICRO Manual

5 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer