5
EN
Steam Iron | Plancha de Vapor | Ferro a Vapor
1.1. Power Supply
Make sure the main voltage is compable with the appliance’s. If this is not the case
please consult the Customer Support Service.
1.2. Power Cord and Other Cables
Do not tangle the cord or pull it to disconnect the appliance. Also, keep the cord away
from warm surfaces.
Never use the appliance if it has a damaged cable or socket.
Take it to the Technical Support Service for replacement.
1.3. Humidity and Water
Do not use your appliance in humid places. Do not allow the appliance to become wet
under any circumstances as this may be dangerous. To avoid re hazard or electric
shock do not expose your appliance to humidity or water. Furthermore, do not place
your appliance under water (e.g. for cleaning).
1.4. Cleaning
Before cleaning, be sure to switch o the appliance and remove the plug from the
main power supply.
Always allow the unit to cool down before cleaning.
Any deposits, starch residue or stains le on the plate can be removed using a damp
cloth or a non-abrasive liquid detergent.
Avoid scratching the plate with steel wool or metal objects.
The plasc parts can be cleaned with a damp cloth then wiped over with a dry cloth.
Self-Cleaning
The self-cleaning feature cleans inside the plate, removing impuries. We recommend
using it every 10-15 days.
• Direcons:
> Fill the reservoir up to the maximum level indicated and set the steam
regulator (3) to “0”.
> Set the temperature dial (8) to the maximum temperature and wait for the
light (9) to turn o.
> Pull the plug out of the socket and hold the iron horizontally over the sink.
> Hold the cleanout buon (7) unl all the boiling water, steam and impuries
come out [Fig. 7].
> When the soleplate has cooled down, you can clean it with a damp cloth.
1.5. General Precautions
• Please follow the instrucons in the user manual which help to properly install
and operate this product and enjoy its advanced features. Please keep the
instrucons for future reference.
• Read all instrucons before using the product.
• Maintenance and service operaons are only to be carried out by authorized
professionals.
• Any damage caused by manual modicaons to the product is not covered by the
warranty.
• If this product is used for other purposes than the ones originally intended, or if it
is not correctly connected, the product may become damaged and the warranty
will be voided.
