Behringer Ultra Octaver UO300 Manual

Behringer Ikke kategoriseret Ultra Octaver UO300

Læs gratis den danske manual til Behringer Ultra Octaver UO300 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 9 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 5 anmeldelser. Har du et spørgsmål om Behringer Ultra Octaver UO300, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

ULTRA OCTAVER UO300

3-Mode Octaver Eects Pedal

Thank you for showing your condence in us by purchasing the BEHRINGER ULTRA OCTAVER UO300.

This high-quality eects pedal creates a monster sound by adding two additional tones using your

guitar—one and two octaves below the original tone. Thanks to its high-performance features you’ll

get natural, clear octave sounds with constant pitch, even for staccato playing.

Octave eect is possible due to a circuitry that generates signals one or more octaves below the input signal.

1. Controls

(1) The selector allows you to optimize the eects pedal for HIGH, MID and LOW frequencies RANGE

and use instruments with dierent frequency ranges (guitar, bass guitar, keyboard, etc.)

(2) The control adjusts the level of the original input signal.DIRECT

(3) The control adjusts the level of the generated signal one octave below the original signal.OCT 1

(4) The control adjusts the level of the generated signal two octaves below the original signal. OCT 2

(5) The blue LED illuminates when the eect is activated. It also serves as a battery level indicator.ON/BATT

(6) Use the footswitch to activate/deactivate the eect.

(7) Use this ¼" TS connector to plug in the instrument cable.IN

(8) The ¼" TS connector sends the signal to your amp.OUT

Use the connection at the front of the unit to plug in a 9 V power supply (not included). DC IN

The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V battery,

press the hinges with a ballpen and remove the pedal cover. Be careful not to scratch the unit.

◊ The UO300 has no on/o switch. As soon as you insert the jack into the in connector,

the UO300 begins running. When not using the UO300, remove the jack from the

in connector. This extends the life of the battery.

The is located at the bottom.SERIAL NUMBER

(5)

(1)

(7)

(4)

(6)

(3)(2)

(8)

Produkt Specifikationer

Mærke:	Behringer
Kategori:	Ikke kategoriseret
Model:	Ultra Octaver UO300

Har du brug for hjælp?

Hvis du har brug for hjælp til Behringer Ultra Octaver UO300 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Behringer Manualer

Behringer BM-15M MURF BOX Manual

8 Oktober 2025

Behringer GMC-600 Manual

22 Juli 2025

Behringer PMC-300 Manual

21 Juli 2025

Behringer GMX-500 Manual

21 Juli 2025

Behringer GMX-300 Manual

21 Juli 2025

Behringer PMC-1000 Manual

20 Juli 2025

Behringer PMC-500 Manual

20 Juli 2025

Behringer GMC-300 Manual

20 Juli 2025

Behringer PMC-150 Manual

20 Juli 2025

Behringer GB3002-A Manual

19 Juli 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Beverage-Air Horizon HFS1HC-1HS Manual

3 November 2025

SingularXYZ Sfaira ONE Manual

3 November 2025

Milwaukee MX FUEL MXF501 Manual

3 November 2025

Royal Catering RCKV-200/39-S9 Manual

3 November 2025

Beverage-Air Horizon HFS1HC-1HG Manual

3 November 2025

Ingenuity Comfy Clean Deluxe Manual

3 November 2025

Intermatic WP3110MXD Manual

3 November 2025

PITSOS PTI6E66G Manual

3 November 2025

Kuryakyn Road Thunder 2719 Manual

3 November 2025

Intermatic OP5GY18 Manual

3 November 2025