Behringer V-Tone Acoustic ADI21 Manual

Behringer Ikke kategoriseret V-Tone Acoustic ADI21

Læs gratis den danske manual til Behringer V-Tone Acoustic ADI21 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 3.5 stjerner ud af 9 anmeldelser. Har du et spørgsmål om Behringer V-Tone Acoustic ADI21, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

BEHRINGER V-TONE ACOUSTIC ADI21

WELCOME TO BEHRINGER

Thank you for showing your confidence in us by purchasing

the V-TONE ACOUSTIC ADI21. This high-quality acoustic guitar

driver is designed for all acoustic guitar players who are looking

for more sounds to reach maximum flexibility and creativity.

Thanks to its high-performance EQ section (including parametric

mids) and the integrated Tube/Microphone Emulation, the ADI21

gives your guitar natural sound with smooth saturation, just as if

it were being miked. In addition, the ADI21 functions as a standard

ultra-transparent direct injection box when used in bypass mode.

A DI (Direct Injection) box allows you to send a signal directly

from an unbalanced, high-impedance output (like an electric guitar)

and connect it directly to the balanced mic input of a mixing

console.

Whether for stage, recording, rehearsal or warm-up,

BEHRINGERs V-TONE ACOUSTIC ADI21 is a natural choice for

those who are seeking great tone with a simple set-up.

CONTROL ELEMENTS

Control elements

The TREBLE control governs the high-frequency range of

the signal (+/-12 dB).

The BASS control allows you to boost/cut the low-

frequency range (+/-12 dB).

Use the MID control to boost or cut the mid-range

frequencies (+/-12 dB). The control lets youMID FREQ

select the middle frequency (170 Hz to 3.5 kHz) that will be

boost/cut.

The LEVEL control adjusts the output level of the ADI21.

The BLEND control activates the integrated tube/

microphone emulation circuitry. In most cases, you will

probably set it to maximum (100%). If you want to hear

some of the distinct timbre of a piezo pickup or reduce the

amount of compression, simply turn the control

counterclockwise.

When activated, the GND LIFT disconnects the ground

connection between input and output. Depending on the

grounding of the connected equipment, this can eliminate

hum or ground loops.

The -20 dB PAD switch attenuates the output level of the

BAL OUT (see ) by -20 dB. It should be activated

when the output level is too high for the microphone input

of the mixer channel.

+Before using the PAD switch, be sure that it is the

mic preamp on the mixing console that is clipping

and not the ADI21. You should only attenuate the

output signal via the PAD switch if the CLIP LED of

the mic channel lights up frequently or remains

lit.

Use the footswitch to activate/deactivate all the tone

functions (EQ, microphone/tube emulation). When

deactivated, the ADI21 functions solely as a standard

transparent DI box.

This LED illuminates when the effect is activated (see ).

Connectors

Use this 1/4" TS INPUT connector to plug in the instrument

cable of your acoustic guitar or other instruments.

BAL OUT is the ADI21s balanced mic level output. Use a

high-quality, balanced XLR (microphone) cable to connect

the driver to a mixing console.

The unbalanced 1/4" TS OUT connector sends the signal

to your guitar amp.

Bottom of the ADI21

SERIAL NUMBER. The serial number of the ADI21 is

located on the bottom.

BATTERY COMPARTMENT. Open the lid to install or

replace the 9 V battery (see also chapter POWER

REQUIREMENTS).

+The ADI21 is powered as soon you insert a plug

into the INPUT. The battery is disconnected when

the plug is removed. For this reason, the ADI21 has

no on/off switch. To prolong battery life, always

disconnect the input when the driver is not in use.

Power supply connector

BEHRINGER V-TONE ACOUSTIC ADI21

Use the DC IN connection to plug in a 9 V power supply

(not included). For details please refer to chapter POWER

REQUIREMENTS.

APPLICATIONS

Use with other instruments

The ADI21 is not only for acoustic guitars. You can try it with

other instruments (e. g. bass/electric guitars, keyboards etc.) to

create new sounds and enhance your music. Please make sure

that the input level is not too high to avoid overloading the ADI21.

Direct to a mixing console

For live and studio applications you can connect the balanced

XLR BAL OUT directly to a mic input of a mixing console. Be sure

not to overload the input by using the gain control of the respective

channel. For further information please refer to the users manual

of your mixing console.

Use without instruments

You can use the ADI21 without an instrument as an outboard

processor connected to an insert or an effect path (aux send/

return) of your mixing console to affect the signal of a particular

channel. This way you can enhance existing tracks during

mixdown. For further information please refer to the users manual

of your mixing console.

POWER REQUIREMENTS

Battery:

Utilizes standard 9 V alkaline battery (not included).

Power consumption: approx. 25 mA

Power supply:

ATTENTION: PLEASE USE DC POWER SUPPLY ONLY!

Failure to do so may damage the unit and void the warranty.

DC Power Supply Specifications:

- 9 V DC (regulated), 50 mA minimum

- 2 mm female plug, center negative (-)

WARRANTY

For our current warranty terms, please refer to our website at

http://www.behringer.com.

SPECIFICATIONS

Input

Connector ¼" TS

Impedance 4.7 MΩ

Output

Connector ¼" TS

Impedance 1 kΩ

Balanced output

Connector XLR

Impedance 200 Ω

Power supply 9 V, >50 mA DC regulated

Power connector 2 mm DC jack, negative center

Battery 9 V type 6LR61

Power consumption 25 mA

Dimensions approx. 5" (127 mm) x 3 9/10" (100 mm)

x 2" (50 mm)

Weight approx. 460 g

BEHRINGER is constantly striving to maintain the highest professional

standards. As a result of these efforts, modifications may be made from

time to time to existing products without prior notice. Specifications and

appearance may differ from those listed or illustrated.

Technical specifications and appearance subject to change without notice.

The information contained herein is correct at the time of printing. The

names of companies, institutions or publications pictured or mentioned

and their respective logos are registered trademarks of their respective

owners. Their use neither constitutes a claim of the trademarks by

BEHRINGER® nor affiliation of the trademark owners with BEHRINGER®.

BEHRINGER® accepts no liability for any loss which may be suffered by

any person who relies either wholly or in part upon any description,

photograph or statement contained herein. Colours and specification may

vary slightly from product. Products are sold through our authorised

dealers only. Distributors and dealers are not agents of BEHRINGER

® and

have absolutely no authority to bind BEHRINGER® by any express or

implied undertaking or representation. No part of this manual may be

reproduced or transmitted in any form or by any means, electronic or

mechanical, including photocopying and recording of any kind, for any

purpose, without the express written permission of BEHRINGER Spezielle

Studiotechnik GmbH. BEHRINGER® is a registered trademark.

Hanns-Martin-Schleyer-Str. 36-38,

47877 Willich-Münchheide II, Germany.

Tel. +49 2154 9206 0, Fax +49 2154 9206 4903

SAMPLE SETTINGS

Produkt Specifikationer

Mærke:	Behringer
Kategori:	Ikke kategoriseret
Model:	V-Tone Acoustic ADI21

Har du brug for hjælp?

Hvis du har brug for hjælp til Behringer V-Tone Acoustic ADI21 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Behringer Manualer

Behringer RD-78 Manual

6 Juli 2025

Behringer SMP2000 Manual

5 Juli 2025

Behringer SUPER-X PRO CX3400 V2 Manual

19 Juni 2025

Behringer SMP1000 Manual

2 April 2025

Behringer MC2000 Manual

6 Januar 2025

Behringer SM5002 Manual

6 Januar 2025

Behringer MU1000 Manual

6 Januar 2025

Behringer MC1000 Manual

6 Januar 2025

Behringer SM5001 Manual

6 Januar 2025

Behringer MS2050-L Manual

6 Januar 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Yamazen SAB-65 Manual

15 Juli 2025

GPX PJ504 Manual

15 Juli 2025

Transparent TT-B Manual

15 Juli 2025

Yamazen ECSR-4538 Manual

15 Juli 2025

Yamazen SUS-205 Manual

15 Juli 2025

Yamazen YDG-160 Manual

15 Juli 2025

Yamazen OPR-5744 Manual

15 Juli 2025

Metabo RW 18 LTX BL 120 Manual

15 Juli 2025

Victrola Eastwood II VTA-74 Manual

15 Juli 2025

Axis T8415 Manual

15 Juli 2025