BEKO CFP1691DB Manual

BEKO Køling frysning CFP1691DB

Læs nedenfor 📖 manual på dansk for BEKO CFP1691DB (29 sider) i kategorien Køling frysning. Denne guide var nyttig for 16 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/29

57 6210 0000/AV

Refrigerator

User manual

CFP1691DX - CFP1691DS - CFP1691DB - CFP1691DW -

CFE1691DB - CFP1691DG - CFP1691DA - CFP3691DVW

CFP3691DVS - CFP3691DVB - CFP3691DVG

EN /

Please read these instructions first before using your appliance

Thank you for choosing a Beko appliance.

Please take some time to read this user manual before using your appliance, to

ensure you know how to safely operate the controls and functions.

Carefully follow all unpacking and installation instructions to ensure the

appliance is correctly connected and fitted prior to use.

Please write your product model and serial number on the last page of this

user manual, and store in a safe location close to the appliance for easy future

reference.

This user manual may also be applicable for several other models. Differences

between models will be listed.

If you have any questions or concerns, please call our contact centre or find

help and information online at www.beko.co.uk

Symbols and their descriptions

This instruction manual contains the following symbols:

C Important information or useful usage tips.

A Warning against dangerous conditions for life and property.

B Warning against electric voltage.

SUPPLIER’S NAME MODEL IDENTIFIER (*)

INFORMATION

The model information as stored in the product data base

can be reached by entering following website and searching

for your model identiﬁer (*) found on energy label.

https://eprel.ec.europa.eu/

1 Your refrigerator 3

2 Warnings 4

Electrical requirements ........................... 5

Warning! This appliance must be

earthed ..........................................................5

Energy saving tips .....................................6

Compliance with WEEE Directive and

Disposing of the Waste Product: ....... 7

Compliance with rohs directive: ......... 7

Package information ................................ 7

3 Installation 8

Points to be considered when re-

transporting your refrigerator .............8

Before operating your refrigerator ....8

Electric connection ...................................8

Disposing of the packaging ...................9

Disposing of your old refrigerator ......9

Placing and Installation...........................9

Transportation Instructions ................10

Installation Instructions ....................... 11

Changing the illumination lamp ....... 11

4 Before operating 13

Final Check .................................................13

5 Using your refrigerator 14

Temperature Control And

Adjustment ................................................14

Thermostat setting button .................14

Storing Frozen Food ...............................15

Freezing Fresh Food ...............................15

Making Ice Cubes .....................................15

Defrosting ..................................................15

Chiller Compartment ..............................17

Using the water dispenser ..................17

Filling the water dispenser's tank ....17

Cleaning the water tank .....................18

Drip tray ......................................................19

6 Maintenance and

cleaning 20

7 Do's and Don'ts 21

Problem Solvıng ...................................... 22

1 Your refrigerator

C Figures that take place in this instruction manual are schematic and

may not correspond exactly with your product. If the subject parts are not

included in the product you have purchased, then it is valid for other models.

Congratulations on your choice of a Beko quality Appliance which has been

designed to give you service for many years.

1. Adjustable door shelves

2. Water dispenser filling tank

3. Egg section

4. Water dispenser reservoir

5. Adjustable Front Feet

6. Freezing and Storage (store

fresh food to be frozen lower down)

7. Vegetable compartment

8. Chiller compartment

9. Adjustable shelves

10. Wine rack

11. Thermostat Control

*11

2 Warnings

 Do not connect your

appliance to the electricity

supply until all packing and

transit protectors have been

removed.

 If transported horizontally

leave to stand upright for at

least 4 hours before switching

on to allow compressor oil to

settle

 If you are discarding an old

refrigerator with a lock or latch

fitted to the door, disable the

lock/latch, ensure that it is left

in a safe condition to prevent

the entrapment of young

children.

 This fridge/freezer must

only be used for its intended

purpose i.e the storing and

freezing of edible foodstuff.

 Do not dispose of the

appliance on a fire. At Beko,

the care and protection

of our environment is an

ongoing commitment. This

appliance which is among

the latest range introduced

is particularly environment

friendly. Your appliance

contains non CFC / HFC

natural substances in the

cooling system (Called

R600a) and in the insulation

(Called cyclopentane) which

are potentially flammable if

exposed to fire. Therefore,

take care not to damage, the

cooling circuit / pipes of the

appliance in transportation

and in use. In case of damage

do not expose the appliance

to fire or potential ignition

source and immediately

ventilate the room where the

appliance is situated.

 We suggest you contact your

local authority for disposal

information and facilities

available.

 To obtain the best possible

performance and trouble free

operation from your appliance

it is very important to carefully

read these instructions.

 On delivery, check to make

sure that the product is not

damaged and that all the parts

and accessories are in perfect

condition.

 Ensure that the plug remains

readily accessible. Do not use

multiple adapter or extension

cable.

 Failure to observe these

instructions may invalidate

your right to free service

during the guarantee period.

 Keep ventilation openings, in

the appliance enclosure or in

the built-in structure, clear of

obstruction.

 Do not damage the refrigerant

circuit.

 Do not use electrical

appliances inside the food

storage compartments of the

appliance, unless they are of

the type recommended by the

manufacturer.

 We suggest you keep these

instructions in a safe place for

easy reference.

 This appliance can be used

by children aged from 8 years

and above and persons with

reduced physical, sensory

or mental capabilities or

lack of experience and

knowledge if they have

been given supervision or

instruction concerning use

of the appliance in a safe

way and understand the

hazards involved. Children

shall not play with the

appliance. Cleaning and user

maintenance shall not be

made by children without

supervision.

 Children should be supervised

to ensure that they do not

play with the appliance.

Electrical requirements

Before you insert the plug into

the wall socket make sure that

the voltage and the frequency

shown on the rating plate inside

the appliance corresponds to

your electricity supply.

Rating label is on the left hand

side of fridge inner liner.

We recommend that this

appliance be connected to the

mains supply via a suitable

switched and fused socket. The

appliance must be positioned

so that the plug is accessible.

WARNING:

When positioning the

appliance ensure the supply

cord is not trapped or damaged.

Should the mains lead of the

appliance become damaged or

should it need replacing at any

time, it must be replaced by a

special purpose made mains

lead which can only be obtained

from a Beko authorised service

agent.

Warning! This appliance

must be earthed

If the fitted moulded plug is

not suitable for your socket,

then the plug should be cut

off and an appropriate plug

fitted. Destroy the old plug

which is cut off as a plug with

bared cord could cause a shock

hazard if inserted into a socket

elsewhere in the house.

The moulded plug on this

appliance incorporates a 13

A fuse. Should the fuse need

to be replaced an ASTABEAB

approved BS 1362 fuse of the

same rating must be used. Do

not forget to refit the fuse

cover. In the event of losing the

fuse cover the plug must not be

used until a replacement fuse

cover has been fitted.

Colour of the replacement

fuse cover must be the same

colour as that visible on the pin

face of the plug. Fuse covers

are available from any good

electrical store.

FITTED WITH

BS 1362 13A FUSE ALWAYS

FIT BS 1362 REPLACEMENT

CARTRIDGE FUSE

GREEN &

YELLOW

GREEN

BLUE

BLACK

BROWN

RED

22mm.

6mm.

6mm. 32mm.

12mm.

FUSE

CORD GRIP

Important! Fitting A

Different Plug

1. As the colours of the wires

in the mains lead of this

appliance may not correspond

with the coloured markings

identifying the terminals in

your plug proceed as follows:

(See diagram).

2. Connect the green-yellow

or green (Earth) wire to the

terminal in the plug marked

‘E’ or with the symbol or

coloured green and yellow or

green.

3. Connect the blue (Neutral)

wire to the terminal in the

plug marked ‘N’ or coloured

black.

4. Connect the brown (Live) wire

to the terminal in the plug

marked ‘L’ or coloured red.

5. With alternative plugs a 13

A fuse must be fitted either

in the plug or adaptor or in

the main fuse box. If in doubt

contact a qualified electrician.

Energy saving tips

1. Ensure your appliance is

installed in a well ventilated

area.

2. Ensure the time between

buying chilled/frozen food

and placing them in your

appliance is kept at minimum,

particularly in summer. We

recommend you use a cool

bag or a special carrier bag to

carry perishable food.

3. Do not leave the door (s) of

your appliance open longer

than necessary and ensure

they are closed properly after

each opening.

4. Defrost frozen food in the

fridge compartment, so that

frozen food acts as an ice pack

to assist cooling in the fridge.

5. Energy consumption of this

appliance is measured while

freezer compartment is

loaded without use of top

shelf lid and the drawers

except the bottom drawer.

It is advised that freezer

compartment is loaded

without use of drawers except

the bottom drawer in order

to achieve maximum loading

capacity.

Compliance with WEEE

Directive and Disposing of

the Waste Product:

This product complies

with EU WEEE

Directive (2012/19/

EU). This product

bears a classification

symbol for waste

electrical and electronic

equipment (WEEE).This product

has been manufactured with

high quality parts and materials

which can be reused and are

suitable for recycling. Do not

dispose of the waste product

with normal domestic and other

wastes at the end of its service

life. Take it to the collection

center for the recycling of

electrical and electronic

equipment. Please consult your

local authorities to learn about

these collection centers.

Compliance with rohs

directive:

The product you have

purchased complies with EU

RoHS Directive (2011/65/EU).

It does not contain harmful and

prohibited materials specified

in the Directive.

Package information

Packaging materials of the

product are manufactured

from recyclable materials in

accordance with our National

Environment Regulations. Do

not dispose of the packaging

materials together with the

domestic or other wastes. Take

them to the packaging material

collection points designated by

the local authorities.

3 Installation

BPlease remember that the

manufacturer shall not be held

liable if the information given in the

instruction manual is not observed.

Points to be considered

when re-transporting your

refrigerator

1. Your refrigerator must be

emptied and cleaned prior to any

transportation.

2. Shelves, accessories, crisper

and etc. in your refrigerator must be

fastened securely by adhesive tape

against any jolt before repackaging.

3. Packaging must be must

be adequate and the rules of

transportation printed on the

package must be followed.

Please do not forget…

Every recycled material is an

indispensable source for the nature

and for our national resources.

If you wish to contribute to recycling

the packaging materials, you can

get further information from the

environmental bodies or local

authorities.

Before operating your

refrigerator

Before starting to use your refrigerator

check the following:

1. Is the interior of the

refrigerator dry and can the air

circulate freely in the rear of it?

2. Please install the 2 plastic

wedges as illustrated in the figure.

Plastic wedges will provide the

required distance between your

refrigerator and the wall in order

to allow the air circulation. (The

illustrated figure is only an example

and does not match exactly with your

product.)

3. Clean the interior of the

refrigerator as recommended in the

“Maintenance and cleaning” section.

4. Plug the refrigerator into the

wall outlet. When the fridge door is

open, the fridge compartment interior

light will come on.

5. You will hear a noise as the

compressor starts up. The liquid and

gases sealed within the refrigeration

system may also give rise to noise,

even if the compressor is not running

and this is quite normal.

6. Front edges of the refrigerator

may feel warm. This is normal. These

areas are designed to be warm to

avoid condensation

Electric connection

Connect your product to a grounded

socket which is being protected by a

fuse with the appropriate capacity.

Important:

 The connection must be in

compliance with national

regulations.

 The power cable plug must be easily

accessible after installation.

 The specified voltage must be equal

to your mains voltage.

 Extension cables and multiway

plugs must not be used for

connection.

BA damaged power cable must be

replaced by a qualified electrician.

BFaulty product must not be

operated before it is repaired! There

is danger of electric shock!

Disposing of the packaging

The packing materials may be

dangerous for children. Keep the

packing materials out of the reach

of children or dispose of them by

classifying them in accordance with

the waste instructions. Do not dispose

of them along with the normal

household waste.

The packing of your refrigerator is

produced from recyclable materials.

Disposing of your old

refrigerator

Dispose of your old refrigerator

without giving any harm to the

environment.

 Yo u m a y c o n s u l t y o u r a ut h o r i se d

dealer or waste collection center of

your municipality about the disposal

of your refrigerator.

Before disposing of your refrigerator,

cut out the electric plug and, if there

are any locks on the door, make

them inoperable in order to protect

children against any danger.

Placing and Installation

A If the entrance door of the room

where the refrigerator will be

installed is not wide enough for the

refrigerator to pass through, then

carefully remove the doors of your

refrigerator and pass it sideways

through the door.

1. Install your refrigerator to a

place that allows ease of use.

2. Keep your refrigerator away

from heat sources, humid places and

direct sunlight.

3. There must be appropriate air

ventilation around your refrigerator

in order to achieve an efficient

operation. If the refrigerator is to be

placed in a recess in the wall, there

must be at least 5 cm distance with

the ceiling and at least 5 cm with

the wall. If the floor is covered with a

carpet, your product must be elevated

2.5 cm from the floor.

4. Place your refrigerator on an

even floor surface to prevent jolts.

5. This appliance is equipped

with 'Freezer Guard' which ensures

that at the advised setting [4 - four

on the control] the frozen food in the

freezer will not defrost even if the

ambient temperature falls as low as

-15 °C. So you may then install your

appliance in a garage or an unheated

room without having to worry about

frozen food in the freezer being

spoilt. However at low ambient

temperatures mentioned above,

fridge contents are likely to freeze,

so check and consume food in the

fridge accordingly. When the ambient

temperature returns to normal, you

may change the setting to suit your

needs.

Transportation

Instructions

1. The appliance should be

transported only in a vertical upright

position. The packing as supplied

must be intact during transportation.

2. If during the course of

transport the appliance has to be

transported horizontally, it must only

be laid on its right hand side when

standing in the frontof the appliance.

After bringing it to upright position,it

must not be operated for at least 4

hours to allow the system to settle.

3. Failure to comply with the

above instructions could result in

damage occuring to the appliance.

The manufacturer will not be held

responsible if these instructions are

disregarded.

4. The appliance must be

protected against rain, moisture and

other atmospheric influences.

5. When positioning your

appliance take care not to damage

your flooring, pipes, wall coverings

etc. Do not move the appliance by

pulling by the door or handle.

6. Empty any water in the drain

tray before moving. See section

‘Defrosting’ and ‘Care & cleaning’ for

further information.

7. Make sure that the defrost

water pipe at the back of the product

is fixed to the plastic evaporating pan

on the top of the compressor, to avoid

defrost water spillage on the floor.

8. The appliance must be

protected against rain, moisture and

other atmospheric influences.

Important: Care must be taken

while cleaning / carrying the

appliance to avoid touching the

bottom of the condenser metal wires

at the back of theappliance as you

might injure your fingers and hands.

Important:This appliance is not

designed for stacking with any

otherappliance.When positioning

your appliance, take care not to

damage your flooring, pipes,wall

coverings etc.

Important: Care must be taken

while cleaning / carrying the appliance

to avoid touching the bottom of the

condenser metal wires at the back of

the appliance as you might injure your

fingers and hands.

Do not attempt to sit or stand on top

of your appliance as it is not designed

for such use. You could injure yourself

or damage the appliance.

Important: Make sure that mains

cable is not caught under the appliance

during and after carrying / moving

the appliance, to avoid the mains

cable becoming cut or damaged.”Do

not allow children to play with the

appliance or tamper with the controls.

Beko declines to accept any liability

should the instructions not be

followed.

Installation Instructions

1. Fit the two plastic wall spacers

supplied onto the condenser at the

back of the appliance by rotating 1/4

turn.

Plug receptacle

Changing the illumination

lamp

To change the Bulb/LED used for

illumination of your refrigerator, call

your AuthorisedService.

The lamp(s) used in this appliance

is not suitable for household room

illumination. The intended purpose

of this lamp is to assist the user to

place foodstuffs in the refrigerator/

freezer in a safe and comfortable

way.The lamps used in this appliance

have to withstand extreme physical

conditions such as temperatures

below -20 °C.

(only chest and upright freezer)

2. Locate the appliance on a

smooth surface.

3. To ensure it is standing upright

adjust the two front feet by turning

clockwise or anti-clockwise, until it is

in firm contact with the floor. Correct

adjustment of feet avoids excessive

vibration and noise.

4. A special receptacle is supplied

to store the mains plug during transit.

The receptacle is fixed at the back

of the cabinet on the side of the

compressor. Gently remove the plug

from the receptacle. Never pull the

mains cord, you may damage the

appliance. In case of transportation,

ensure you locate the plug in the

receptacle provided to avoid transit

damage.The space in the room where

the appliance is installed must not be

smaller than 10 cubic metres.

5. Your product requires adequate

air circulation to function efficiently.

If the product will be placed in an

alcove, remember to leave at least 5

cm clearance between the product

and the ceiling, rear wall and the side

walls.If the product will be placed in

an alcove, remember to leave at least

5 cm clearance between the product

and the ceiling, rear wall and the side

walls. Check if the rear wall clearance

protection component is present

at its location (if provided with the

product).

6. If the component is not

available, or if it is lost or fallen,

position the product so that at least

5 cm clearance shall be left between

the rear surface of the product and

the wall of the room. The clearance

at the rear is important for efficient

operation of the product.

13 9

45 °

180°

(8) (13)

4 Before operating

Final Check

Before you start using the fridge/

freezer check that:

1. For a freestanding appliance;

‘this refrigerating appliance is not

intended to be used as a built-in

appliance’ .

2. The feet have been adjusted

for perfect levelling.

3. The interior is dry and air can

circulate freely at the rear of the

cabinet.

4. Clean the interior as

recommended under “CLEANING AND

CARE.”

5. Insert the plug into the wall

socket and switch on the electricity

supply.

6. When the door is open the

fridge interior light will come on.

7. You will hear a noise as the

compressor starts up. The liquid and

gases sealed within the refrigeration

system may also give rise to noise,

whether the compressor is running

or not which is quite normal.“Due

to operation of the fan inside the

frost free freezer compartment,

overall noise level is slightly higher

in comparison to non-frost free

appliances. This is quite normal and is

not a fault.”

8. Set the setting knob half way

between min and max.

9. Front edges of the cabinet may

feel warm. This is normal. These areas

are designed to be warm to avoid

condensation.

10. “Do not load the appliance

immediately it is switched on. Wait

until the correct storage temperature

has been reached. We recommend

that you check the temperature

with an accurate thermometer

(see; Temperature Control and

Adjustment)”

11. Since hot and humid air will not

directly penetrate into your product

when the doors are not opened,

your product will optimize itself in

conditions sufficient to protect your

food. Functions and components such

as compressor, fan, heater, defrost,

lighting, display and so on will operate

according to the needs to consume

minimum energy under these

circumstances.

Temperature Control And

Adjustment

The operating temperature is

regulated by the temperature control.

Warm Cold

1 2 3 4 5

(Or) Min. Max.

1=Lowest cooling setting

(Warmest setting).

5=Highest cooling setting

(Coldest setting).

The average temperature inside the

fridge should be around +5°C.

Please choose the setting according

to the desired temperature.

Please note that there will be

different temperatures in the cooling

area.

The coldest region is immediately

above the vegetable compartment.

The interior temperature also

depends on ambient temperature,

the frequency with which the door is

opened and the amount of foods kept

inside.

Frequently opening the door causes

the interior temperature to rise.

For this reason, it is recommended

to close the door again as soon as

possible after use.

Thermostat setting button

The interior temperature of your

refrigerator changes for the following

reasons;

 Seasonal temperatures,

 Frequent opening of the door and

leaving the door open for long

periods,

 Food put into the refrigerator

without cooling down to the room

temperature,

 The location of the refrigerator in

the room (e.g. exposing to sunlight).

 You may adjust the varying interior

temperature due to such reasons

by using the thermostat. Numbers

around the thermostat button

indicates the cooling degrees.

 If the ambient temperature is higher

than 25°C, turn the thermostat

button to maximum position.

 If the ambient temperature is lower

than 25°C, turn the thermostat

button to minimum position.

5 Using your refrigerator

Produkt Specifikationer

Mærke:	BEKO
Kategori:	Køling frysning
Model:	CFP1691DB

Har du brug for hjælp?

Hvis du har brug for hjælp til BEKO CFP1691DB stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Køling frysning BEKO Manualer

BEKO HSA40530N Manual

8 Juli 2024

BEKO RCSA270K30XBN Manual

8 Juli 2024

BEKO ASD2341VX Manual

8 Juli 2024

BEKO UL4823 Manual

8 Juli 2024

BEKO CNE 63720 DX Manual

8 Juli 2024

BEKO TSE 1262 Manual

7 Juli 2024

BEKO GNE V222S Manual

7 Juli 2024

BEKO CA7014FFX Manual

7 Juli 2024

BEKO MN1416224DPX Manual

7 Juli 2024

BEKO DSE 28010 KL Manual

7 Juli 2024

Køling frysning Manualer

Nyeste Køling frysning Manualer

Liebherr KBgw 3864 Premium BioFresh Manual

15 Januar 2025

Liebherr UK1414 Manual

15 Januar 2025

Liebherr GWK 211 Manual

15 Januar 2025

Inventum IVR0881S Manual

15 Januar 2025

Miele kt 2211 Manual

15 Januar 2025

Bauknecht GKIE3883 Manual

15 Januar 2025

Atag ka 210 d Manual

15 Januar 2025

Liebherr ICUNS 3314 Manual

15 Januar 2025

Whirlpool arc 0500 Manual

15 Januar 2025

Candy CV 200 Manual

15 Januar 2025