BEKO DEN59420D Manual

BEKO Opvaskemaskine DEN59420D

Læs nedenfor 📖 manual på dansk for BEKO DEN59420D (58 sider) i kategorien Opvaskemaskine. Denne guide var nyttig for 13 personer og blev bedømt med 4.4 stjerner i gennemsnit af 7 brugere

Side 1/58
DEN59420DX
EN
Document Number :
15 9267 0100_AA_BEKO_E8P_EN/ 06-08-18.(17:14)
Dishwasher
Users Manual
DEN59420DX
EN
Document Number :
15 9267 0100_AA_BEKO_E8P_EN/ 06-08-18.(17:14)
Dishwasher
Users Manual
Explanation of symbols
Throughout ths User Manual the followng symbols are used:
C
Important nformaton or useful
hnts about usage.
A
Warnng for hazardous stuatons
wth regard to lfe and property.
B
Warnng for electrc shock.
Packagng materals of the
product are manufactured
from recyclable materals n
accordance wth our Natonal
Envronment Regulatons.
Do not dspose of the packagng materals together wth the domestc or other wastes.
Take them to the packagng materal collecton ponts desgnated by the local authortes.
Please read these instructions first before using your appliance
Thank you for choosng a applance. Beko
Please take some tme to read ths user manual before usng your applance, to ensure
you know how to safely operate the controls and functons.
Carefully follow all unpackng and nstallaton nstructons to ensure the applance s
correctly connected and ftted pror to use.
Please wrte your product model and seral number on the last page of ths user manual,
and store n a safe locaton close to the applance for easy future reference.
Ths user manual may also be applcable for several other models. Dfferences between
models wll be lsted.
If you have any questons or concerns, please call our contact centre or fnd help and
nformaton onlne at www.beko.co.uk
This product was manufactured using the latest technology in environmentally friendly conditions.
Explanation of symbols
Throughout this User Manual the following symbols are used:
C
Important information or useful
hints about usage.
A
Warning for hazardous situations
with regard to life and property.
B
Warning for electric shock.
Packaging materials of the
product are manufactured
from recyclable materials in
accordance with our National
Environment Regulations.
Do not dispose of the packaging materials together with the domestic or other wastes.
Take them to the packaging material collection points designated by the local authorities.
Please read these instructions first before using your appliance
Thank you for choosing a appliance. Beko
Please take some time to read this user manual before using your appliance, to ensure
you know how to safely operate the controls and functions.
Carefully follow all unpacking and installation instructions to ensure the appliance is
correctly connected and fitted prior to use.
Please write your product model and serial number on the last page of this user manual,
and store in a safe location close to the appliance for easy future reference.
This user manual may also be applicable for several other models. Differences between
models will be listed.
If you have any questions or concerns, please call our contact centre or find help and
information online at www.beko.co.uk
CONTENTS
1 INSTRUCTIONS FOR SAFETY
AND ENVIRONMENT 4
General safety 4 .......................................
Intended use 4 ..........................................
Children’s safety 5 ....................................
Disposing of packaging material 5 ........
Transportation of the product 5 ............
Compliance with WEEE Directive and
Disposing of the Waste Product 6 .........
Compliance with RoHS Directive 6 ........
Package information 6 ............................
2 DISHWASHER 7
Overview 7 ................................................
Fan drying system 8 .................................
Technical specications 8 .......................
3 INSTALLATION 9
Appropriate installation location 9 .......
Connecting water supply 9 .....................
Connection to the drain 10 ....................
Adjusting the feet 10 ..............................
Electrical connection 10 .........................
This appliance must be earthed 11 .......
Fitting a dierent plug 11 .......................
Initial use 11 ..............................................
4 PREPARATION 12
Tips for energy saving 12 ........................
Water softening system 12 ....................
Adjusting the water softening
system 12 ..................................................
Adding salt ...........................................14
Detergent 15 .............................................
Adding Liquid/Gel Detergent and
Rinse Aid ..............................................16
Powder Detergents 17 ............................
Tablet detergents .............................. 18
Collapsible upper basket wires 21 .........
Tray Wash Supports 21 ............................
Upper basket multipurpose service
rack 22 .......................................................
Upper basket height adjustable
rack 22 .......................................................
Cutlery basket 23 ....................................
Collapsible lower basket tines 23 .........
Adjusting the height of the upper
basket 24 ..................................................
5 OPERATING THE PRODUCT 25
Programme Selection / Programme
Cancel key 26 ............................................
Function Keys 26 .....................................
Preparing the machine...................... 26
Programme selection 26 ........................
Auxiliary functions 29 ............................
Scheduling the washing time 31 ...........
Starting the programme 32 ...................
Cancelling the programme 32 ...............
Adjusting the amount of rinse aid 33 ...
Salt indicator ( ) 33 ..............................
Rinse Aid indicator ( ) 33 .....................
End of programme 33 .............................
Water cut-o warning 33 .......................
Overowing warning 34 .........................
6 HOMEWHIZ FUNCTION 35
HomeWhiz Setup and User Account
Settings 35 ...............................................
7 MAINTENANCE AND
CLEANING 39
Cleaning the outer surface of the
product 39 ................................................
Cleaning the interior of the machine 39
Cleaning the lters 39 ............................
Cleaning the hose lter 40 .....................
Cleaning the impellers 41 ......................
Lower impeller 41 ....................................
Upper impeller 41 ...................................
8 TROUBLESHOOTING 42
9 GUARANTEE 47
4
Dishwasher / User’s Manual
/ 53 EN
Instructions for safety and envIronment
1
This section contains safety
instructions that will help to give
protection from risk of personal
injury or property damage. Failure
to follow these instructions shall
void all warranties.
General safety
Never place the product
on a carpet-covered floor;
otherwise, lack of airflow
beneath the product will
cause electrical parts to
overheat. This will cause
problems with your product.
Do not operate the product
if the power cable / plug is
damaged! Call the Authorised
Service Agent.
Connect the product to a
grounded outlet protected
by a fuse complying with
the values in the “Technical
specifications” table. Do
not neglect to have the
grounding installation made
by a qualified electrician.
Our company shall not be
liable for any damages that
will arise when the product
is used without grounding
in accordance with the local
regulations.
The water supply and
draining hoses must be
securely fastened and remain
undamaged.
Unplug the product when not
in use.
Never wash the product by
spreading or pouring water
onto it! There is the risk of
electric shock!
Never touch the plug with
wet hands! Never unplug by
pulling on the cable, always
pull out by grabbing the plug.
The product must be
unplugged during installation,
maintenance, cleaning and
repairing procedures.
Always have the repair
procedures carried out by the
Authorised Service Agent.
Manufacturer shall not be
held liable for damages that
may arise from procedures
carried out by unauthorised
persons.
Never use chemical solvents
in the product. They bring
forth the risk of explosion.
When you pull the upper and
lower baskets out completely,
the door of the product will
bear all the weight of the
baskets. Do not put other
loads on the door; otherwise,
the product may tilt.
Never leave the door of
the product open apart
from loading and unloading
procedures.
Do not to open the door of
the product when it is running
unless necessary. Be careful
for the rush of hot steam
when you need to open the
door.
Intended use
This product has been
designed for domestic use.
It must be used to do the
domestic type dishes only.
Dishwasher / User’s Manual
5 / 53
EN
Instructions for safety and envIronment
This appliance is intended
to be used in household and
similar applications such as:
- Staff kitchen areas in shops,
offices and other working
environments.
Only dishwasher safe
detergents, rinse aids and
additives must be used.
The manufacturer waives
any responsibility arisen
from incorrect usage or
transportation.
This appliance can be used
by children aged from 8 years
and above and persons with
reduced physical,sensory
or mental capabilities or
lack of experience and
knowledge if they have
been given supervision or
instruction concerning use
of the appliance in a safe
way and understand the
hazards involved. Children
shall not play with the
appliance. Cleaning and user
maintenance shall not be
made by children without
supervision.
Children’s safety
Electrical products are
dangerous for the children.
Keep children away from the
product when it is in use. Do
not let them to tamper with
the product.
Do not forget to close the
door of the product when
leaving the room where it is
located.
Store all detergents and
additives in a safe place away
from the reach of the children.
Disposing of packaging
material
Packaging materials are
dangerous to children. Keep
packaging materials in a safe
place away from reach of the
children.
Packaging materials of the
product are manufactured from
recyclable materials. Dispose
of them properly and sort in
accordance with recycled waste
instructions. Do not dispose
of them with normal domestic
waste.
Transportation of the
product
A
If you need to move the
product, do it in upright
position and hold from
the rear side. Tilting the
product onto its front
side may cause the
electronic parts in it get
wet and damaged.
1. Unplug the product before
transporting it.
2. Remove water drainage and
water supply connections.
3. Drain the remaining water in
the product completely.
6
Dishwasher / User’s Manual
/ 53 EN
Instructions for safety and envIronment
Compliance with WEEE
Directive and Disposing
of the Waste Product
This product complies with
EU WEEE Directive
(2012/19/EU). This product
bears a classification symbol
for waste electrical and electronic
equipment (WEEE).This product
has been manufactured with high
quality parts and materials which
can be reused and are suitable for
recycling. Do not dispose of the
waste product with normal
domestic and other wastes at the
end of its service life. Take it to the
collection center for the recycling
of electrical and electronic
equipment. Please consult your
local authorities to learn about
these collection centers.
Compliance with RoHS
Directive
The product you have purchased
complies with EU RoHS Directive
(2011/65/EU). It does not contain
harmful and prohibited materials
specified in the Directive.
Package information
Packaging materials of the product
are manufactured from recyclable
materials in accordance with our
National Environment Regulations.
Do not dispose of the packaging
materials together with the
domestic or other wastes. Take
them to the packaging material
collection points designated by
the local authorities.
Dishwasher / User’s Manual
7 / 53
EN
Dishwasher
2
Overview
1. Upper basket
2. Cutlery basket
3. Lower basket
4. Automatic Liquid/Gel Detergent and Rinse Aid
Dosing System
5. Type Label
6. Control panel
7. Door
11. Lower impeller
9. Salt reservoir lid
10. Filters
11. Upper impeller
12. Upper basket rail
13. Upper cutlery basket ( depends on model )
14. Upper table ( depends on model )
15. Ceiling impeller ( depends on model )
16. Fan drying system ( depends on model )
16
8
Dishwasher / User’s Manual
/ 53 EN
Dishwasher
Technical specications
Compliance to standards and test data / EC declaration of conformity
This product complies with the following EU directives;
Development, production and sales stages of this product comply with the safety
rules included in all pertaining European Community regulations.
2014/35/EU, 2014/30/EU, 93/68/EC, IEC 60436/DIN 44990, EN 50242
Power input 220-240 V, Hz (see rating label)50
Total power consumption W (see rating label)1800-2100
Heater power consumption 1800 W (see rating label)
Total current (depends on the model) 10 A (see rating label)
Drain pump power consumption 30 W (see rating label)
Water pressure 0.3 –10 bar (= 3 100 N/c= 0.01-1.0
Mpa)
C
Technical specifications may be changed without prior notice to improve the
quality of the product.
C
Figures in this manual are schematic and may not match the product exactly.
C
Values stated on the markings of the product or in the printed documents
accompanying the product are obtained in the laboratory on basis of the relevant
standards. Depending on operational and environmental conditions of the
product, these values may vary.
Note for test institutions:
Data required for performance tests shall be provided upon request. Requests can be
e-mailed to the following address:
dishwasher@standardloading.com
Do not forget to provide the code, stock and serial numbers of the product to be tested in
your request e-mail along with your contact information. Code, stock and serial numbers of
the product may be found on the type label attached to the side wall of the door.
Fan drying system
Fan drying system ensures efficient drying of your dishes.
It is normal to hear a different sound than that of washing cycle during fan operation.
Dishwasher / User’s Manual
9 / 53
EN
3Installation
To make the product ready for use, make
sure that the electricity, tap water supply
and water drainage systems are appropriate
before calling the Authorised Service Agent.
If they are not, call a qualified technician
and plumber to have any necessary
arrangements carried out.
C
Preparation of the location
and electrical, tap water and
waste water installations at the
place of installation is under
customer's responsibility.
B
Manufacturer shall not be held
responsible for damages arising
from processes carried out by
unauthorised persons.
A
Prior to installation, visually
check if the product has any
defects on it. If so, do not have
it installed. Damaged products
cause risks for your safety.
C
Make sure that the water inlet
and discharge hoses are not
folded, pinched or crushed
while pushing the product into
its place after installation or
cleaning procedures.
When placing the product, pay attention not
to damage the floor, walls, piping, etc. Do
not hold the product from its door or panel
to move it.
Appropriate installation
location
Place the product on a solid and flat
floor that has sufficient load carrying
capacity! The product must be installed
on a flat surface in order for the door to
be closed comfortably and securely.
Do not install the product at places
where temperature may fall below 0ºC.
Place the product on a rigid floor. Do
not place it on a long pile rug or similar
surfaces.
B
Ensure the power cable does
not get trapped under the
product.
Make sure that you select a location
that will allow you to load and unload
the dishes in a fast and comfortable
manner.
Install the product in a place close
to the tap and the drain. Select the
installation location by considering
that it will not be changed after the
connections are made.
Connecting water supply
Do not use old or used water inlet
hose on the new product. Use the new
water inlet hose supplied with the
product.
Connect the water inlet hose directly
to the cold water tap. Permitted water
temperature up to 25°C. Pressure
coming from the tap should be
minimum 0.3 and maximum 10 bars. If
the water pressure exceeds 10 bars, a
pressure relief valve should be installed
in between.
Open the tap completely after making
the connections to check for water
leaks.
A
For your safety, close the water
inlet tap completely after the
washing programme is over.
10
Dishwasher / User’s Manual
/ 53 EN
Installation
Connection to the drain
Water discharge hose can directly be
connected to the drain hole or sink’s
drainage. The length of this connection
must be min. 50 cm and max. 100 cm from
the floor. A discharge hose longer than 4
meters will cause washing performance
to be affected.Attach the water discharge
hose to the drainpipe without bending it.
Tightly fix the water discharge hose to the
drainpipe in order to prevent any dislocation
of the water discharge hose during
operation of the product.
min
300
min
120
max 1000
min 500
C
Drainpipe must be connected
to the foul water system and it
should not be connected to any
surface water drain.
Adjusting the feet
If the door of the product cannot be closed
properly or if the product wobbles when you
push it slightly, then you need to adjust the
feet of the product. Adjust the feet of the
product as illustrated in the relevant section.
A
Diswashers door must be
aligned properly otherwise hot
steam can escape! Danger of
serious burns, other injury or
may damage furniture.
Electrical connection
Before you insert the plug into the wall
socket make sure that the voltage and
the frequency shown in the rating label
corresponds to your electricity supply.
We recommend that this appliance be
connected to the mains supply via a suitable
switched and fused socket in a readily
accessible position.
If the supply cord or the mains lead is
damaged please do not replace it yourself.
The supply cord or the mains lead must be
replaced by a Authorised Service Agent or a
similarly qualified person.
Dishwasher / User’s Manual
11 / 53
EN
Installation





With the alternative plugs a 13A fuse must
be fitted either in the plug or adaptor or
in the main fuse box. If in doubt contact a
qualified electrician.
Initial use
Before starting to use the product, make
sure that all preparations are made in
accordance with the instructions in sections
“Important safety instructions” and
“Installation”.
Before using the product, fill the salt
reservoir with 1 litre of water, add salt
(see next page) and stir to dissolve.
Run the Dishwasher without dishes
on a short programme with a small
amount of detergent.
A
There might be a small amount
of water left in the product after
factory quality control tests. This
causes no harm to the product.
A
This appliance must
be earthed
If the fitted moulded plug is not
suitable for your socket, then
the plug should be cut off and
an appropriate plug fitted.
Destroy the old plug, which is
cut off as a plug with a bared
cord could cause a shock
hazard if inserted into a socket
elsewhere in the house.
The moulded plug on this
appliance incorporates a 13A
fuse. Should the fuse need to
be replaced an ASTA approved
BS1362 fuse of the same rating
must be used. Do not forget
to refit the fuse cover. In the
event of losing the fuse cover,
the plug must not be used
until a replacement fuse cover
has been fitted. Colour of the
replacement fuse cover must be
the same colour as that visible
on the pin face of the plug. Fuse
covers are available from any
good electrical store.
Fitting a dierent plug
As the colours of the wires in the mains
lead of this appliance may not correspond
with the coloured markings identifying the
terminals on your plug, proceed as follows:
1. Connect the green - yellow or green
(earth) wire to the terminal in the plug
marked ‘E’ or with the symbol or
coloured green and yellow or green.
2. Connect the blue (neutral) wire to
the terminal in the plug marked ‘N’ or
coloured black.
3. Connect the brown (live) wire to the
terminal in the plug marked ‘L’ or
coloured red.
12
Dishwasher / User’s Manual
/ 53 EN
PreparatIon
4
Tips for energy saving
Following information will help you use
the product in an ecological and energy-
efficient manner.
Wipe away any coarse food remnants on the
dishes before putting them in the product.
Operate the product after filling it
completely.
When selecting a programme, consider
the table of "Programme data and average
consumption values".
Do not put more detergent than suggested
on the detergent package.
Water softening system
The product is equipped with a water
softening system which reduces the
hardness of incoming water. This system
softens the supply water to a level that will
allow washing the dishes with the required
quality.
Dishwasher salt is used for this purpose.
Adjusting the water
softening system
Cleaning, rinsing and drying performance of
your dishwasher will increase when water
softening system is adjusted properly.
Adjust the new water hardness level
according to the Water hardness level
instruction in this booklet.
Use the test strip supplied with the product
according to the steps given below to
determine hardness level of your supply
water.
Dishwasher / User’s Manual
13 / 53
EN
PreparatIon
Remove the test
strip from the
packet.
Turn on the tap and
let the water run for
about a minute.
Hold the test strip in
the water for about
a second.
Remove the test
strip from the water
and shake it.
Wait for 1 minute. The test strip shows
you the hardness
level.
After determining hardness level of the supply water:
1. After switching on your machine, long press the Menu key
2. Pres the settings menu key for 3 seconds to enter the Settings Menu.
3. Using <- and +> keys, proceed until the water hardness setting indicator becomes on (“r”
position will be displayed).
4. Using the Selection key, adjust water hardness level according to the hardness of the
supply water. For correct setting please see “Water hardness level setting table”.
5. Press the Menu key to exit the settings menu. Your setting will be saved automatically.
Water hardness level adjustment table
Hardness
Level
English Water
Hardness °dE
German Water
Hardness °dH
French Water
Hardness °dF Water Hardness Level Indicator
Level 0 0-5 0-4 0-8 Press the Selection key to switch the water
hardness level to position 1. (r1)
Level 1 6-9 5-7 9-13
Level 2 10-15 8-12 14-22 Press the Selection key to switch the water
hardness level to position 2. (r2)
Level 3 16-19 13-15 23-27 Press the Selection key to switch the water
hardness level to position 3. (r3)
Level 4 20-24 16-19 28-34 Press the Selection key to switch the water
hardness level to position 4. (r4)
Level 5 25-62 20-50 35-90 Press the Selection key to switch the water
hardness level to position 5. (r5)
In order to protect your glassware against glass corrosion in an optimal way, you have to
perform the same hardness settings, which you have made in the control panel, with the
regeneration setting switch.
For example, if you have adjusted to “3rd level” in the control panel, also set the regeneration
adjustment switch to 3rd level.
Regeneration Adjustment Switch
0th Level 1st Level 2nd Level 3rd Level 4th Level 5th Level
1 1 2 3 4 5
14
Dishwasher / User’s Manual
/ 53 EN
PreparatIon
3. Add 1 litre of water to salt reservoir of
your machine only in initial use.
4. Add salt to the salt compartment. To
speed up dissolution rate of salt in
water, stir it with a spoon.
C
You can put about 2 kg of
softening salt into the salt
reservoir.
5. Replace the lid and tighten it when the
reservoir is full.
C
You need to add salt right before
starting the machine. Thus, the
overflowing salty water will be
flushed immediately, preventing
the risk of corrosion in machine.
In cases where you would not
start washing immediately,
run your machine empty in the
shortest program.
C
Since different salt brands in the
market have different particle
sizes and since the water
hardness may vary, dissolution
of the salt in water may take
a couple of hours. Therefore,
Salt Indicator remains on for a
while after adding salt into the
machine.
If the hardness level of the supply water
is above 90 °dF or if you are using well
water, then it is recommended to use water
purification devices and special filters.
If the hardness level of the supply water is
below 1dF, there is no need to use salt
in your dishwasher. If this is the case, “No
Salt Warning Indicator” (if any) illuminates
continuously on the panel of your machine.
If the water hardness level adjustment is set
to level 1, the “No salt warning indicator” will
illuminate continuously although it is not
necessary to use salt. If you use salt under this
condition, salt will not be consumed and the
Salt indicator will not illuminate.
C
If you move your house, it is
necessary to readjust water
hardness level of your machine
by considering the information
given above according to the
hardness level of the supply
water in your new location.
Your machine will display the
most recently adjusted water
hardness level.
C
Adjust the water softness
level according to the "Water
hardness level instruction"
supplied with your machine.
Adding salt
C
Use only special softening salts
produced particularly for the
dishwashers in your machine.
1. First take the lower basket out to add
softening salt.
2. Turn the salt reservoir lid counter-
clockwise to open it (A).
Dishwasher / User’s Manual
15 / 53
EN
PreparatIon
Detergent
You can use powder, tablet and liquid/gel
detergent in the machine.
A
Only use the detergents
produced particularly for
use with dishwashers in the
machine. We recommend you
not to use detergents that
contain chlorine and phosphate
as they are harmful for the
environment.
Your dishwasher is equipped with an
Automatic Liquid/Gel Detergent Dosing
System.
Thanks to this system, the amount of rinse
aid and liquid/gel detergent required for the
selected washing programme is adjusted
automatically.
C
Please read the information
given in section “Operating
the Product” to activate or
deactivate the Automatic
Liquid/Gel Detergent Dosing
adjustment.
C
When the Automatic Liquid/
Gel Detergent function is
enabled, the Automatic Liquid/
Gel Detergent indicator on
the panel will light up if there
is liquid/gel detergent in the
detergent box. If there is little or
no detergent in the detergent
box, the indicator will flash.
C
When the Automatic Liquid/Gel
Detergent indicator starts to
flash, there is enough detergent
for at least 5 washing cycles.
Factory settings of the Automatic
Liquid/Gel Detergent Dosing
System are based on the detergent
amount recommended by detergent
manufacturers.
You can proceed to the Settings menu
to change the Automatic Liquid/Gel
Detergent Dosing setting according
to your habits, or according to the
recommendations by the detergent
manufacturer if you are using a
different liquid/gel detergent.
C
Please follow the instructions
given in section “Operating the
Product” to change the settings
of the Automatic Liquid/Gel
Detergent Dosing System and
Rinse Aid.
C
In addition to liquid/gel
detergents that function only
as a detergent, there are also
liquid/gel detergents that act as
rinse aid and/or soften water.
Follow the manufacturer’s
recommendations when using
these detergents.
Detergent manufacturer’s
recommendations about the amount of
liquid/gel detergent to be used are as
follows:
For lightly soiled dishes 20 ml
For moderately soiled dishes 25 ml
For heavily soiled dishes 30 ml
C
Some gel-type detergents may
not be suitable for automatic
dosing as they are highly
viscous. Apply this type of
detergents onto the inner
surface of the dishwasher’s
door or directly into the
dishwasher, paying attention
to the recommendations of the
detergent manufacturer.
16
Dishwasher / User’s Manual
/ 53 EN
PreparatIon
C
Wipe clean any spilled rinse aid
outside the reservoir. Otherwise,
it will cause foaming in the next
washing cycle, reducing the
washing performance of the
product.
C
The rinse aid used in
dishwashers is a special product
that is recommended to increase
drying efficiency and prevent
water or lime stains on the
washed items. For this reason,
care must be paid to have rinse
aid in the rinse aid reservoir
and to use rinse aids produced
specially for dishwashers only.
Using the Automatic Liquid/Gel
Detergent Dosing System
In order to use the Automatic Liquid/
Gel Detergent Dosing function, select
Automatic Liquid/Gel Detergent Dosing
function on the control panel.
When the function is active, its indicator
comes lit and the system uses appropriate
amount of detergent and rinse aid in each
washing program.
C
Press the key again to cancel
the function.
C
When automatic liquid/gel
detergent dosing function
is selected, do not use other
types (powder, tablet, etc) of
detergents.
If you want to use another type
of detergent while the automatic
liquid/gel detergent dosing system
is full, cancel the automatic liquid/
gel detergent dosing function on
Adding Liquid/Gel
Detergent and Rinse Aid
The Automatic Liquid/Gel Detergent Dosing
system is found on the door of your
dishwasher.
1
2
After fully opening the door of the
dishwasher, open the decorative cover as
shown with arrows 1 and
A
B
C
D
2. Open the cover shown with (A) in the
picture and add rinse aid. Open the cover
shown with (B), add liquid/gel detergent and
close the covers.
C
The indicator marked with (C) on
your machine informs you about
the liquid/gel detergent level in
the box.
C
The indicator marked with (D) on
your machine informs you about
the rinse aid level in the box.
Dishwasher / User’s Manual
17 / 53
EN
PreparatIon
Installing/Removing the Liquid/
Gel Detergent and Rinse Aid Box
Top remove the rinse aid and detergent
boxes, push and lift the system cover on
both sides as shown with arrows 1 and 2 and
open.
1
21
Lift and remove the rinse aid box (A).
A B
1
2
Move the detergent box (B) in the direction
of the arrow (1) and lift to remove (2). Once
the cleaning or filling procedure is complete,
follow the above steps in reverse order to
re-install the detergent and rinse aid boxes.
Powder Detergents
C
You can find the correct amount
of powder detergent for the
selected programme in the
table "Programme Data and
Consumption Values".
C
You can apply powder
detergent onto the cover of the
dishwasher or directly into the
machine.
the control panel. Then you can use
powder, tablet or liquid/gel detergent.
C
Use only liquid/gel detergent
suitable for the dishwasher.
A
Do not mix different brands of
liquid/gel detergents.
C
Do not fill the liquid/gel
detergent box with liquids or
chemical cleaners (vinegar,
bleacher etc.) other than liquid/
gel detergent.
C
Liquid/gel detergents that lost
their fluidity and became firm
must not be used in automatic
liquid/gel detergent dosing
system.
Liquid/gel detergents must be used
in a short time once they have been
unpacked. Unpacked liquid/gel
detergents may lose their fluidity in
time.
C
If a different brand or type of
liquid/gel detergent will be used,
make sure previous detergent
is depleted completely and then
remove and clean the liquid/gel
detergent tank under tap water.
C
Fill the rinse air box only with
rinse aid, and the detergent box
only with liquid/gel detergent.
If you fill it inappropriately,
immediately remove the boxes,
empty them and clean under
running water.
18
Dishwasher / User’s Manual
/ 53 EN
PreparatIon
C
To use powder detergents, go to
the Settings menu to disable the
Automatic Liquid/Gel Detergent
Dosing System and if any, the
Tablet Detergent function.
C
Powder detergents must be
used with programmes without
Prewash. See Programme Data
and Consumption Values.
C
Use powder detergent in short
programmes without prewash
since the solubility of the tablet
detergent changes depending
on the temperature and time.
Tablet detergents
Table detergents exhibit water softening
and / or rinse aid effect in addition to
detergent effect. Some types of these
detergents also contain special-purpose
washing chemicals such as glass and
stainless steel protectors.
C
Tablet detergents give
satisfying results only under
certain usage conditions. The
best washing performance in
dishwashers is obtained by using
detergent, rinse aid and water
softening salt individually.
A
C
Place the tablet detergent into
the Tablet Detergent Box found
on the upper basket of the
dishwasher (A).
C
When using tablet detergents,
you can use the Tablet
Detergent Function to improve
the drying performance of the
dishwasher (based on model).
Tablet detergent types commonly found on
the market:
2in1:
Contains detergent, rinse aid or water
softening salt
3in1:
Contains detergent, rinse aid and
water softening salt
4in1:
Contains glass protectors in addition
to detergent, rinse aid and water softening
salt
5in1:
Contains glass and stainless steel
protectors in addition to detergent, rinse aid
and water softening salt
C
When using tablet detergents,
follow the manufacturer's
instructions on the packaging.
C
Contact the detergent
manufacturer if your dishes
are wet and/or if you notice
limescale spots particularly on
your glasses after the washing
programme is over when using a
tablet detergent.
When you switch to powder
detergent from tablet detergent:
1. Make sure that salt and rinse aid
reservoirs are full.
2. Set the water hardness to the highest
level and perform an empty run.
3. After the empty washing cycle, review
the user manual and readjust the water
hardness level so as to suit the water
supply.
Dishwasher / User’s Manual
19 / 53
EN
PreparatIon
4. Make the appropriate rinse aid settings.
Items not suitable for washing in
the dishwasher
Never wash dishes soiled by cigarette
ash, candle remnants, polish, dyestuff,
chemicals, etc. in your dishwasher.
Do not wash silverware and cutlery
with wooden or bone stems, glued
pieces, or pieces that are not resistant
to heat, as well as copper and tin-
plated containers in the dishwasher.
C
Decorative prints of chinaware
as well as aluminum and silver
items may get discoloured or
tarnished after washing in the
dishwasher just as it happens
in handwashing as well. Some
delicate glass types and crystals
may become dull in time. We
strongly recommend you to
check if the tableware you are
going to purchase is suitable
for washing especially in the
dishwasher.
Placing the dishes into the
dishwasher
You can use your dishwasher in the
optimum way with respect to energy
consumption and washing and drying
performance only if you place the dishes in
an orderly way.
Wipe away any coarse food remnants
(bones, seeds, etc.) on the dishes
before placing them in the dishwasher.
Place thin, narrow pieces in the middle
sections of baskets if possible.
Place the heavily soiled and bigger
items in the lower basket and smaller,
delicate and light items in the upper
basket.
Place the hollowed dishes such as
bowls, glasses and pans upside down in
the dishwasher. Thus, accumulation of
water in deep hollows is prevented.
A
To prevent possible injuries,
always place the sharp and
pointed dishes such as service
fork, bread knife, etc. upside
down so as their pointed ends
will face down or they will lie
horizontally in the dish basket.
Unload dishes in the lower basket first and
then the dishes in the upper basket.
20
Dishwasher / User’s Manual
/ 53 EN
PreparatIon
Suggestions for loading the dishwasher
Lower basket
Upper basket
Improper Loading Of Dishware
Improper Loading Of Dishware
Dishwasher / User’s Manual
21 / 53
EN
PreparatIon
Collapsible upper basket
wires
You can use collapsible wires when you
need a larger space for your dishes in the
upper basket of your machine.
To bring the collapsible wires into horizontal
position, grab the wire from the middle
position and push them in the direction of
arrow in the figure. Place your larger dishes
into the area created. To bring the wires
back to vertical position, just lift them up.
C
Bringing the wires to the
horizontal position by holding
them from the tips may cause
them to bend. Therefore, hold
the wires from their stems while
bringing them to the horizontal
or vertical positions.
Tray Wash Supports
Use the supports to wash trays in the
bottom basket.
See the Auxiliary functions section for
appropriate programme and function
selection.


Produkt Specifikationer

Mærke: BEKO
Kategori: Opvaskemaskine
Model: DEN59420D

Har du brug for hjælp?

Hvis du har brug for hjælp til BEKO DEN59420D stil et spørgsmål nedenfor, og andre brugere vil svare dig