BenQ WiT Manual

BenQ Lys WiT

Læs gratis den danske manual til BenQ WiT (56 sider) i kategorien Lys. Denne vejledning er vurderet som hjælpsom af 7 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 4 anmeldelser. Har du et spørgsmål om BenQ WiT, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/56

e-Reading Lamp

AR15_D/Hop

BenQ.com

P/N: 4J.2T001.004

4J.W3P02.003

1English

Package Contents

Check the packaging for the following items according to the model you purchased. If any is

missing or damaged, please contact the place of purchase immediately.

For the AR15_D Model

For the AR15_D Hop Model

• The illustrations in this guide are for your reference only and may look different from the

appearance of the product you purchased.

• The table clamp is available as a separate purchase.

For Your Safety

• Use only the supplied power adapter and connect only to a suitable outlet power (100-240V

AC, 50-60 Hz). Otherwise the lamp will fail to work normally or result in a fire hazard.

• In order to prevent any damages to the lamp, do not hang or place any objects over the lamp.

• Route the power cord so as to avoid it from being walked on or pinched by items placed upon

or against it.

• Place the lamp only on a solid, flat and stable surface. Otherwise the lamp may topple over and

result in damages.

• If the lamp will not be used for a long period of time, unplug it from the power outlet.

Installation

For the AR15_D Model with a Pedestal Base

1. Place the pedestal base on a solid,

flat and stable surface.

2. Insert the shaft on the pedestal

base all the way into the hole on

the end of the lamp arm [Figure

(1)] and then secure it by

tightening the screw using the

supplied Hex L-key [Figure

(2)].

Be sure to tighten the screw to

secure the pedestal base to the lamp

arm. Otherwise the pedestal base

will detach from the lamp arm and

result in damages or personal

injuries if the lamp is unwittingly

moved by grasping the lamp arm.

3. Connect the power cord to the

power adapter [Figure (3)] and

plug it into a power outlet [Figure

(4)].

• e-Reading Lamp x 1 • Power adapter x 1 • Pedestal base x 1

• Hex L-key x 1

• e-Reading Lamp x 1 • Power adapter x 1 • Stand base x 1

• Stand pillar x 1 • Screw x 6 • Rubber cushion x 6

• Wrench x 1 • Hex L-key x 1

In case of the following situations, unplug the lamp from the power outlet

immediately and contact the authorized service center or a qualified service

person for inspection or repair:

• When the outer casing of the lamp is broken

• When there are strange odors coming from the lamp

• When the lamp flickers

• When the insulation of the lamp’s wiring is damaged or frayed, and the metal

strings inside can be seen

Do not use the lamp in a humid environment (like in a bathroom or outdoors).

Otherwise the components inside may short-circuit and result in accidents.

This lamp is designed for indoor use only. Do not use it outdoors.

Never disassemble the lamp or remove any components from it, as doing so may

result in accidents and will void the product warranty.

CAUTION

Produkt Specifikationer

Mærke:	BenQ
Kategori:	Lys
Model:	WiT
Produktfarve:	Gold, White
Lampetype:	LED
Strømkilde type:	Vekselstrøm
Pæreeffekt:	- W
Egnet til lys type:	Atmosfære
Antal lyskilder:	- pære(r )
Justering af lysstyrke:	Ja
Pære(r) inkluderet:	Ja
Pasform/dække type:	Ikke-udskiftelig pære(r)
Passende til rumtype:	Universel
Justerbar farvetemperatur:	Ja