Berkel Volano B2 Manual


Læs gratis den danske manual til Berkel Volano B2 (59 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 9 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 5 anmeldelser. Har du et spørgsmål om Berkel Volano B2, eller vil du spørge andre brugere om produktet?

Side 1/59
USER MANUAL
MANUALE D’USO
GEBRAUCHSANLEITUNG
MANUEL D’INSTRUCTIONS
VOD K POUŽITÍ
BETJENINGSVEJLEDNING
MANUAL DEL USUARIO
YTTÖOHJE
EN
DE
CS
ES
IT
FR
DA
NAUDOTOJO VADOVAS
HANDLEIDING
BRUKSANVISNING
MANUAL DE INSTRUÇÕES
MANUAL DE INSTRUCTIUNI
VOD NA POUŽITIE
BRUKSANVISNING
NO
RO
NL
PT
SV
LT
SK
VOLANO SERIES
VOLANO B2, VOLANO B3,
VOLANO TRIBUTE, VOLANO P15,
VOLANO B114, VOLANO L16,
VOLANO B116
FI
CODE: MAN-VMB-001
rev02
4
DESCRIPTION
Manual, ywheel slicer ma-
chine, equipped with a circular
blade, suitable for cutting only
the food products of the types
and within the dimensional
limits indicated in this manual.
The main parts of the machine
are shown in the general com-
ponent diagram reported in
picture 1.
SAFETY
The machines described in this
manual comply with the latest
European hygiene and safety
standards.
Pay attention to the following
basic safety precautions:
- -read all the instructions be
fore using the machine;
- this product is not intended
to be used by children;
- operate the machine only if
properly trained and in perfect
psycho-physical conditions;
- do not use the machine in any
way other than what indicated
in this manual;
- use the machines only in full
structural, mechanical and sys-
tem efciency;
- -install the machine in con
formity to the instructions
indicated in the “Installation”
section;
- -install the machine in a loca
tion out of the reach of person-
nel unauthorized to operate it
and especially out of the reach
of minors;
- stay highly concentrated when
using the machine and avoid any
distraction during use;
- do not allow the machine to
be used by others who have
not read and fully understood
the content of this manual;
- do not wear baggy clothing or
clothing with open sleeves;
- do not allow anyone else,
other than the operator, to ap-
proach during product cutting
operations;
- do not remove, cover or
modify the tags located on the
machine body and, in case of
damage of these, replace them
promptly;
- do not remove, modify or
bypass any mechanical protec-
tive devices;
- slice only the permitted prod-
ucts, do not attempt cuts on
prohibited type products;
- always keep clean and dry the
sliced product resting surface,
the work area all around the
machine and the operator oor
area;
- do not use the machine as
a resting surface and do not
place any objects on it other
than food used for cutting op-
erations;
- do not use the slicer when,
due to normal wear, the dis-
tance between the edge of
the blade and the blade guard
ring exceeds 6 mm. In this case,
contact the manufacturer or
one of the Authorized Service
Centers to change the blade.
- -Immediately stop the ma
chine in the event of a defect,
abnormal operation, suspicion
of breakdown, incorrect move-
ment, unusual noises;
- use protective gloves for
cleaning and maintenance op-
erations;
- place and remove the goods
to be sliced on the sliding plate
only with the carriage com-
pletely pulled back and put the
blade protection in safety posi-
tion;
- for movement of the meat
table during cutting operations
use only the ywheel;
- never put your hands on the
food product while slicing. Al-
ways keep your hands far from
the blade;
- use of cutting accessories
which were not provided by
the manufacturer with the ma-
chine is prohibited.
The manufacturer declines any
responsibility coming from in-
appropriate use, modications
and/or repairs carried out by
the user or unauthorized per-
sonnel, use of replacement
parts, which are not original
or not specic for the machine
model.
Operating conditions:
- Temperature from -5°C to
+40°C
- Max. humidity 95%
DO NOT SLICE:
- frozen food products;
- food products with bones;
- vegetables in general
- any other product not intend-
ed for food use.
Residual risks
The safety ring around the
blade protects the operator
from incidental contact with
the blade although, in order
to allow the sharpening oper-
ations, the protection in the
sharpening area may not en-
tirely eliminate the risk of cut-
ting.
WARNING: during
the blade cleaning and
sharpening operations, pay
extra attention to keep your
hands as far as possible from
the unprotected area. Use of
protective gloves is recom-
mended.
INSTALLATION
OF THE MACHINE
If you do not use the stand (op-
!


Produkt Specifikationer

Mærke: Berkel
Kategori: Ikke kategoriseret
Model: Volano B2
Bredde: 520 mm
Dybde: 715 mm
Højde: 580 mm
Vægt: 33000 g
Produktfarve: Black, Stainless steel
Nem at rengøre: Ja
Blad, diameter: 265 mm
Snittertype: Vejledning
Snittetykkelse (maks.): 2 mm
Udbakke: Ja

Har du brug for hjælp?

Hvis du har brug for hjælp til Berkel Volano B2 stil et spørgsmål nedenfor, og andre brugere vil svare dig