Bestway 67227 Manual

Bestway Luftmadras 67227

Læs gratis den danske manual til Bestway 67227 (13 sider) i kategorien Luftmadras. Denne vejledning er vurderet som hjælpsom af 27 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 14 anmeldelser. Har du et spørgsmål om Bestway 67227, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/13

S-S-000517

OWNER’S MANUAL

www.bestway-global.com

Model: #67223/#67224/#67225/#67226/#67227

FIG 1

SAFETY WARNING:

1. Keep away from heat sources and fire.

2. Avoid the sharp and rough objects, or the airbed may get damaged.

3. Do not over-inflate or jump on the airbed, doing so may decrease the airbed's life span.

4. The airbed is not a life saving device, do not use in water.

INSTRUCTION TO INFLATE

FLOCKED AIRBED

PREPARATION:

1. If the airbed is dirty, use a clean damp cloth and gently wipe down the surface. Be sure to dry the airbed before storing.

Note: Do not use harsh detergents that may damage the airbed.

2. Once deflated, carefully fold the airbed and sotre in a cool, dry location away from chemicals and heavy, or sharp objects.

CLEANING & STORAGE:

If the airbed surface is damaged, use the provided repair patch.

To repair: 1. Completely deflate the airbed.

2. Clean and dry the damaged area.

3. Apply a repair patch and smooth out any air bubbles.

Note: Never use other liquid glue or adhesive fabric, only use the repair patch like the provided one.

REPAIRING:

Please read instructions carefully before using this airbed.

Bestway has two ways for you to inflate the airbed.

INFLATION:

DEFLATION:

Locate the foot pump and remove the white rubber plug from the suction port. Depress the foot pump area to inflate the bed. Be sure

to depress the pump straight down. Your foot should completely cover the suction port while depressing the foot pump, this will keep

the air from escaping the inflation chamber back through the suction port. Lift your foot completely off of the hole in order to have the

suction port refill the chamber. Continue until the bed reaches affirm but not over inflated pressure. Insert the white rubber plug back

into the suction port and screw on the plastic cover. The airbed is ready for use.

Open the inner cover of the screw valve to deflate.( FIG 3)

Air pump

Open the top cover of the screw valve; inflate the bed with an air pump and close the valve once inflated. (FIG 2)

Note: Air pump is not included.

After use, airbed may require additional air to increase firmness, add air according to your desired firmness.

Built-in Foot Pump

Unroll the bed onto a flat area free from objects and debris.

The Flocked side should be facing up and the PVC side should be on the

ground. Screw the screw valve located on the side of bed near the warning.

FIG 2 FIG 3

S-S-000517

NOTE:

Produkt Specifikationer

Mærke:	Bestway
Kategori:	Luftmadras
Model:	67227
Type:	Dobbelt madras
Bredde:	1830 mm
Højde:	280 mm
Vægt:	4630 g
Produktfarve:	Blå
Pakkedybde:	300 mm
Pakkebredde:	400 mm
Pakkehøjde:	135 mm
Pakketype:	Fuld farveboks
Materiale:	Vinyl
Længde:	2030 mm
Reparationslap inkluderet:	Ja
Indbygget pude:	Ja
Indbygget luftpumpe:	Ja
Stimlet top:	Ja
Selvlåsende sikkerhedsventil:	Ja
Blød underside:	Vinyl
Deflateret størrelse (BxL):	1830 x 2110 mm