PLEASE READ AND SAVE THESE
IMPORTANT INSTRUCTIONS
When using electrical appliances, basic safety
precautions should always be taken including
the following:
1. Before connecting the heater, check that the
voltage indicated on the rating plate
corresponds to the main voltage in your
home/office.
2. WARNING: In order to avoid overheating, do
not cover the heater ().
3. DO NOT position the heater directly under a
power socket.
4. DO NOT use this heater in the immediate
surroundings of a bath, a shower or a
swimming pool.
5. If the supply cord or plug is damaged, it must
be replaced by the manufacturer or its service
agent or similarly qualified person in order to
avoid hazard. Should the product suffer
damage or breakdown, it must be returned to
the manufacturer or their service agent.
6. Under the environment with electrical fast
transient, the product may malfunction and
require user to reset the product.
7. DO NOT use this heater with a programmer,
timer, separate remote-control system or any
other device that switches the heater on
automatically, since a fire risk exists if the
heater is covered or positioned incorrectly.
8. Only touch the heater with dry hands.
9. DO NOT position where it can be touched by
children, especially the very young.
10. DO NOT use this heater outdoors.
11. Allow a safe area around the heater away from
furniture or other objects; at least 50 cm from
the top and sides and 200 cm at the front.
12. DO NOT use this heater when it is lying on
its side.
13. DO NOT use the heater in rooms with
explosive gas (e.g. petrol) or while using
inflammable glue or solvent (e.g. when gluing
or varnishing parquet floors, PVC etc.).
14. DO NOT insert any objects into the heater.
15. Keep the mains cord at a safe distance from
the main body of the heater.
16. If overheating should occur, the built-in
overheating safety device will switch off the
heater.
17. DO NOT place the cord under a rug.
18. The heater is to be installed so that switches
and other controls cannot be touched by a
person in the bath or shower.
19. Avoid the use of an extension cord because
it may cause the heater to overheat.
20. CAUTION: In order to avoid a hazard due
to inadvertent resetting of the thermal cut-
out, this appliance must not be supplied
through an external switching device, such
as a timer, or connected to a circuit that is
regularly switched on and off by the utility.
21. This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless
--they have been given supervision or
instruction concerning use of the appliance
by a person responsible for their safety.
Children should be supervised to ensure that
they do not play with the appliance.
22. ( )The remote control contains a magnet
to help affix the control to the metal main unit
when not in use. Please only place the
remote control on the unit where the remote
control home is marked (H)
DESCRIPTION (SEE FIG. 1, 2, 3, 4, & 6)
A. Glass panel
B. Pebbles (changeable)
C. Light Bulb access panel (contains G9 type
40W max bulb)
D. Main housing
E. Fixed unit mounting brackets
F. Heat vents
G. Control panel
H. Remote control home
I. Feet x 2 (removable)
J. Digital thermostat (5 presets)
K. Mode control
L. Digital timer (6 presets)
M. Flame intensity button
N. ON/OFF switch (main unit only)
O. Thumb screws x 4
P. Securing bottom bracket
Q. ON/OFF button remote control
ASSEMBLY INSTRUCTIONS
(SEE FIG. 1–6)
Carefully remove all parts and make sure that
they are all present. Ref. to Figs.1-6.
Installing Batteries into the Remote:
Before operation, insert 2 AAA batteries (not
supplied) into the back of the remote control:
• DO NOT mix old and new batteries
• DO NOT mix alkaline, standard (carbon-zinc),
or rechargeable (nickel-cadmium) batteries
The remote control for this unit has the capability
of operating all control panel functions except the
ENGLISH
5
