Biostar A10N-8800E Manual

Biostar Ikke kategoriseret A10N-8800E

Læs gratis den danske manual til Biostar A10N-8800E (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 9 personer og har en gennemsnitlig bedømmelse på 4.2 stjerner ud af 5 anmeldelser. Har du et spørgsmål om Biostar A10N-8800E, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

How to update BIOS?

There are three ways to update the BIOS:

BIOS Update Utility, BIOS Online Update Utility and BIOS Flasher.

BIOS update utility

1. Installing BIOS Update Utility from the DVD Driver.

2. Download the proper BIOS from www.biostar.com.

tw .

3. Open BIOS Update Utility and click the Update

BIOS button on the main screen.

4. A warning message will show up to request your

agreement to start the BIOS update. Click Yes to start

the update procedure.

5. Choose the location for your BIOS le in the system.

Please select the proper BIOS le, and then click on

Open. It will take several minutes, please be patient.

6. After the BIOS Update process is nished, click on

OK to reboot the system.

7. While the system boots up and the full screen logo shows up, please press the

<Delete> key to enter BIOS setup.

After entering the BIOS setup, please go to the Save & Exit, using the Restore

Defaults function to load Optimized Defaults, and select Save Changes and Reset to

restart the computer. Then, the BIOS Update is completed.

Backup BIOS

Click the Backup BIOS button on the main screen for

the backup of BIOS, and select a proper location for

your backup BIOS le in the system, and click Save.

Online Update Utility

1. Installing BIOS Update Utility from the DVD

Driver.

2. Please make sure the system is connected to

the internet before using this function.

3. Open BIOS Update Utility and click the Online

Update button on the main screen.

4. An open dialog will show up to request your

agreement to start the BIOS update. Click Yes to

start the online update procedure.

5. If there is a new BIOS version, the utility will ask

you to download it. Click Yes to proceed.

6. After the download is completed, you will be

asked to program (update) the BIOS or not. Click

Yes to proceed.

7. After the updating process is nished, you will

be asked you to reboot the system. Click OK to

reboot.

8. While the system boots up and the full screen logo shows up, press <Delete>

key to enter BIOS setup.

After entering the BIOS setup, please go to the Save & Exit, using the Restore

Defaults function to load Optimized Defaults, and select Save Changes and Reset to

restart the computer. Then, the BIOS Update is completed.

Produkt Specifikationer

Mærke:	Biostar
Kategori:	Ikke kategoriseret
Model:	A10N-8800E
Bredde:	170 mm
Dybde:	170 mm
Antal HDMI-porte:	1
Ethernet LAN-porte (RJ-45):	1
Antal USB 2.0-porte:	2
Antal USB 3.2 Gen 1 (3.1 Gen 1) type-A-porte:	2
Ethernet LAN:	Ja
Processorkerner:	4
Hurtig installationsvejledning:	Ja
Kabler inkluderet:	SATA
Lyd-output kanaler:	8.0 kanaler
Processorfrekvens:	2.1 GHz
Processorserie:	AMD FX™
Processorproducent:	AMD
Processormodel:	8800P
Drivere inkluderet:	Ja
Antal VGA-porte (D-sub):	1
Ethernet-grænsefladetype:	Gigabit Ethernet
Komponent til:	PC
Processorgeneration:	6th Generation AMD FX™ Series
Antal PS/2-porte:	2
Processor sokkel:	NA (integreret CPU)
Kompatibel processor serie:	AMD Athlon FX
Bundkort chipset familie:	AMD
Lydchip:	Realtek ALC887
Understøttede hukommelsestyper:	DDR4-SDRAM
Hukommelses slots type:	DIMM
Ikke-fejlkorrigerende kode:	Ja
Understøttede hukommelsesclock-hastigheder:	2133 MHz
Antal SATA III-stik:	2
LAN Kontroller:	Realtek RTL8111H
Hukommelseskanaler:	To-kanals
USB 2.0-stik:	2
USB 3.2 Gen 1 (3.1 Gen 1) stik:	2
CPU-ventilatorstik:	Ja
Motherboard form faktor:	mini ITX
Understøttede lagerdrev brugerflader:	M.2, SATA III
Grafikadapter familie:	AMD
Seriel port via intern header:	Ja