Black Box EME1A1-005 Manual


Læs gratis den danske manual til Black Box EME1A1-005 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om Black Box EME1A1-005, eller vil du spørge andre brugere om produktet?

Side 1/2
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746
Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018
Web site: www.blackbox.com • E-mail: info@blackbox.com
Customer
Support
Information
February 2010
MT1000A-85-R4
BL A C K B OX
®
AC model detects voltage from 50 to 250 VAC
and indicates Alarm or Normal. DC model
is user-programmable with both the base
and top voltage from 0 to 60 volts.
Voltage Sensors
EME1A1- 005
EME1D1-005
Overview
The Voltage Sensors monitor the presence or absence of AC or
DC voltage. The AC model includes an Alarm/Normal indicator
in the device firmware. Use up to two AC voltage sensors per
AlertWerks
ServSensor Junior (EME102A), and up to eight per
ServSensor (EME108A).
Connect up to eight voltage sensors to AlertWerks V4E
(EME134A) ServSensor Expansion Hub RJ-45 sensor ports.
The voltage sensors include an SNMP interface for alarm/
normal status. Set these using the Web interface and configure
them to send alerts as SNMP traps, e-mail, and SMS (text
message).
For features, turn this page over
Specifications
Communications Cable — RJ-45 jack to sensor using UTP
CAT5 cable
Maximum Extension Cable Length 1000 ft. (304.8-m)
with approved low-capacitance shielded cable or UTP
Measurement Indication EME1A1-005: Alarm or Normal
Measurement Range EME1A1-005: Detects voltage
at 50 to 250 VAC;
EME1D1-005: User-programmable from 0 to 250 VDC
Measurement Rate Multiple readings every second
Sensor Type Open/closed contact switch
BL A C K BOX
®
FREE, live, 24/7 Tech Support is just 30 seconds away.
724-746-5500 | blackbox.com
© Copyright 2011. Black Box Corporation. All rights reserved. Printed in U.S.A. Black Box
®
and the Double Diamond logo are registered trademarks, and AlertWerks is a trademark, of BB
Technologies, Inc. Any third-party trademarks appearing in this publication are acknowledged to be the property of their respective owners.
EME1A1-005, version 1
Features
Powered by the AlertWerks Hub (EME102A or EME108A). Needs no additional power.
Use up to two AC voltage sensors per EME102A, and up to eight per EME108A.
Detects the presence of two dry contact sensors.
Connect up to eight voltage sensors to each EME134A or EME108A, or EME1X8 RJ-45 sensor ports.
Includes an autosensing disconnect alarm.


Produkt Specifikationer

Mærke: Black Box
Kategori: Ikke kategoriseret
Model: EME1A1-005

Har du brug for hjælp?

Hvis du har brug for hjælp til Black Box EME1A1-005 stil et spørgsmål nedenfor, og andre brugere vil svare dig