Blaupunkt BP-FD-ACPREP Manual


Læs gratis den danske manual til Blaupunkt BP-FD-ACPREP (10 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Blaupunkt BP-FD-ACPREP, eller vil du spørge andre brugere om produktet?

Side 1/10
User Manual
ADDRESSABLE REPEATER
BP-FD-ACPREP
------------Please read this operation manual carefully before installing and using the product.
-----------
. Introduction
hereinafter referred to as Fire
developed and produced by Asenware. The fire indicating panel is connected
with fire alarm control panel through RS485 bus line. Each floor can be
installed with a fire indicating panel , and when a detector or module triggers the
alarm, the fire indicating panel will emit a sound and light alarm, mea ile nwh
the relevant fire alarm information will be displayed on the screen.
. Features
Beautiful and elegant appearance
Easy to operate, easy to install
With a stable and reliable communication
of RS485 bus , and the maximum length of
the bus is over 1,000 meters
. Technical Parameters
Voltage %DC 24V±20
Current monitor state 32mA alarm state 66mA
St dard GB 17429-2011 Fire Indicating Panelan
Capacity single fire indicating panel can display up to 99 pieces of
information
Wiring system: five-wire system, power cord (+24V, GND), 485 bus (A,
B), PE line(
).
Operating environment
indoor
temperature -10 0 (14 ~ 122 )+5
relative humidity 95% RH (40 non-condensing)
Dimensions 210.0mm×150.0mm×33.5mm
Weight 0.5KG
. Appearance and Dimensions
The Figure 1 below illustrates overall dimensions of the panel.
BP-FD-ACPREP


Produkt Specifikationer

Mærke: Blaupunkt
Kategori: Ikke kategoriseret
Model: BP-FD-ACPREP

Har du brug for hjælp?

Hvis du har brug for hjælp til Blaupunkt BP-FD-ACPREP stil et spørgsmål nedenfor, og andre brugere vil svare dig