Blaupunkt BPDW8913WR Manual

Blaupunkt Kamera BPDW8913WR

Læs gratis den danske manual til Blaupunkt BPDW8913WR (1 sider) i kategorien Kamera. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 9 anmeldelser. Har du et spørgsmål om Blaupunkt BPDW8913WR, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

When the camera is xed, put the lead-wire of the camera through the car trunk.

Notice

Camera Emitter

Installation ins tr uctions for the camera:

Installation ins tr uctions for the emitter:

rear lamp

Notice

Speci cations

Packing List Installation

Operations for Android system client

Operations for iOS Apple system client

Installation app Software

Settings:

WIFICAMERA

Not in ra nge

* When set WIFI signal to connect the mobile phone, please close the WIFI signal

previously opened.

image display time is relate to the CPU memory, software version, working

software number of mobile phone.

* when the background is black or the image is still, please exit the APP, and check

whether the wifi connection is normal then click again the APP icon to enter into

the software interface.

* ,

Notice

Connection WiFi:

WIFICAMERA

Secured wit h WP2

WI FI CA ME RA

1. Turn on the iOS device and enter the App Store

2. Search “Sight Wi ” app.

3. Install the Sight Wi app

Installation app Software

Connection WiFi:

WIFICAM ER A

View the video:

Notice

The speci c steps to clear network memory are as follows. and then follow the above WIFI connection 

method to reconnect the new network.

Press this icon to enter into the settings menu . You can change the default factory

SSID and password of the wifi camera tool, and clicking will show whether the change

is successful, and clicking to cancel the new SSID set.

Settings:

* When set WIFI signal to connect the mobile phone, please close the WIFI signal

previously opened.

image display time is relate to the CPU memory, software version, working

software number of mobile phone.

* when the background is black

click again the APP icon to enter into

the software interface.

* ,

or the image is still, please exit the APP, and check

whether the wifi connection is normal then .

Notice

WI FI CA ME RA

WP2 PSK

Pa ssw ord

Se cur ity

Conne ct Cance l

4. After adjustment, drill a second hole, then

mount and tighten to nish camera installation

3. Move the camera orientation to adjust the

display e ect

2. Use a Screwdriver to ensure that the rst 

screw is properly screwed into the drill hole.

1. In the proper position of rear license plate

drill a hole for mounting screws

View the video:

WIFI car rear view

Night Vision Range >3m

Power Supply 12V DC

Video output 0.9 Vp-p. 75Ω ~1 2

Consumption Current 150mA MAX

Image Sensor 1/4inch CMOS

Minimum illumination <5 Lux

Electronic Exposure Time 1/60s-12ns(NTSC) sec

1/50s-12.5ns(PAL) sec

Horizontal View Angle

Storage Temperature

Operation Humidity 15%~85%RH

Operation Temperature

Dimensions 370 X 55 X 35MM

Weight 140g

Items GL8912

640×480 pixels

Effective Pixels

Video Format NTSC/PAL

80O

- 10~ C+50

- 20~ C+60

WIFI transmitter box

Wireless Protocol

Modulation Mode

Transmission Distance

With No Obstacle

Weight

Operation Voltage 12V DC

Operation Frequency 2400 2483.5MHz-

IEEE 802.11b, IEEE 802.11g,

IEEE 802.n (1T1R Modes)

Operation Current 150mA(MAX)

Encryption Mode WPA2

802.11b：DSSS (CCK, DQPSK,

DBPSK)•802.11g/n：OFDM

(BPSK, QPSK, 16QAM, 64QAM)

≥10m

60±5g

Operation Temperature

Dimensions 71 35.5 12.3MM X X

Storage Temperature

Operation Humidity 20%~90%RH

Items GT4068

- 10~ C+50

- 20~ C+60

Settings Connecting Camera Logo

Settings

BPDW8913WR

2.4GHz Digtal Wireless

Car Rearview System

Open the APP, if the connection between the wi tool and the mobile device is 

successful the app will be highlighted. Then the image would be transmitted from the

camera to the app. As shown in the gure below, the camera is showning real-time 

monitoring in the app. The user would also be able to press icon to refresh the image

Open the APP, if the connection between the wi tool and the mobile device is 

successful the app will be highlighted. Then the image would be transmitted from the

camera to the app. As shown in the gure below, the camera is showning real-time 

monitoring in the app. The user would also be able to press icon to refresh the image

2. Click on “Wi-Fi”, then select the camera to connect too. The initial SSID of the device

is “WIFICAMERA”. Then type in the password of the devices

(Default password: 88888888).

1. Click on the “ ” icon.

Wi-Fi

2. Click on “Wi-Fi”, then select the camera to connect too. The initial SSID of the device

is “WIFICAMERA”. Then type in the password of the devices

(Default password: 88888888).

1. Click on the “ ” icon in the main interface of the iOS device.

* Never reverse the positive and negative pole. Reversing the poles

can damage the emitter box and camera, rendering them unusable.

* The positive and negative pole of the emitter box’s power cable are connected

to the positive and negative pole of the rear lamp of the car.

* The antenna of the emitter box should not be placed near any metal part of the car.

This can negatively e ect the emitting distance and image transmission.

1. Turn on the Andriod Phone and enter the Google Play Store

2. Search “Sight Wi ” app.

3. Install the “Sight Wi ” app

Wi-Fi

* User could press the RESET button of the emitter to renew the default factory

SSID and password.

* When the user changes the SSID and password, the user shall forget the network in the

"Settings" , and then reconnect the new network. Otherwise login error will remain displayed.

Press this icon to enter into the settings menu you can change the default factory SSID

and password of the wifi camera tool, and clicking will show whether the change is successful,

and clicking to cancel the new SSID set.

* User could press the RESET button of the emitter to renew the default factory

SSID and password.

* When the user changes the SSID and password, the user shall forget the network in the

"Settings" , and then reconnect the new network. Otherwise login error will remain displayed.

Connecting

Camera

Take a

Photo

Record

a Video

Video

Playback

* All the speci cations are subject to minor change without prior notice

License Plate

Nuts & Bolts

License Plate

Screws (Optional)

In-line Wire

Connectors

Grommet Cable Ties

Black-

Red+

The speci c steps to clear network memory are as follows. and then follow the above WIFI connection 

method to reconnect the new network.

Produkt Specifikationer

Mærke:	Blaupunkt
Kategori:	Kamera
Model:	BPDW8913WR

Har du brug for hjælp?

Hvis du har brug for hjælp til Blaupunkt BPDW8913WR stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Kamera Blaupunkt Manualer

Blaupunkt ADHC 2.0 Manual

6 August 2024

Blaupunkt RC 2.0 Manual

27 Juli 2024

Blaupunkt AHDC-1.0 Manual

21 Juli 2024

Blaupunkt RC 1.0 Manual

17 Juli 2024

Blaupunkt HD Dash Cam BPDV165 Manual

8 April 2024

Blaupunkt BPDW8913WR Manual

10 Marts 2024

Blaupunkt RC 3.0 Manual

29 Januar 2024

Blaupunkt AHDC-2.0 Manual

2 April 2023

Blaupunkt Dual Camera HD Dash Cam BPDV142 Manual

30 Marts 2023

Blaupunkt BC OE2 Manual

10 Januar 2023

Kamera Manualer

Nyeste Kamera Manualer

17 September 2025

16 September 2025

16 September 2025

16 September 2025

9 Juni 2025

Overmax Camspot 4.8 Manual

9 Juni 2025

Overmax Camspot 4.0 PTZ Manual

8 Juni 2025

Vemer EasyEye.NOW Manual

2 April 2025

Rollei HD-30 Manual

29 Marts 2025

Rollei Security Cam 1080p Manual

29 Marts 2025