Blaupunkt EQ 700 Manual


Læs gratis den danske manual til Blaupunkt EQ 700 (5 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 44 personer og har en gennemsnitlig bedømmelse på 3.8 stjerner ud af 22.5 anmeldelser. Har du et spørgsmål om Blaupunkt EQ 700, eller vil du spørge andre brugere om produktet?

Side 1/5
Operating and Installation Instructions
7-BAND EQUALIZER
EQ 700
General Safety Notes
Observe the following to protect yourself against
injuries :
Recycling and Disposal
Do not dispose of your old unit in the
household trash!
Use the return and collection systems
available to dispose of the old device.
This manual may be updated from time to time without
any notice.
INTRODUCTION
1
Proper system planning is vital in order to maximize the
device’s performance and road safety. Plan your instal-
lation carefully to avoid compromising performance re-
liability of the system. Consult an authorized Blaupunkt
delaler for installation or reparation. Read the manual
carefullt before operating the device for the rst time.
Safety Notes
Ensure to follow below safety notes during installation
and wiring connection: -
Installation and Connection Instructions
Disclaimer
In no event shall Blaupunkt be liable for any direct,
indirect, punitive, incidental, special consequential
damages to property or life and whatsoever arising out
of or connected with the use or misuse of our products.
USA & CANADA: This product is not intended for sale in
the United States and Canada. If purchased in the U.S. or
Canada, this product is purchased on as-is basis. No
warranty, whether expressed or implied is provided in
the U.S. or Canada.
Disconnect the negative terminal of the battery. Refer
to the safety notes of the vehcle manufacturer.
Ensure positions of the holes are nowhere near the
vehicle component to avoid any damage during
drilling.
Ensure cross section of the cable is no less than
2.5mm if the positive and negative cables are too
long.
Incorrect installation may result in malfunction of the
device or the car sound system.
Select a dry and well-ventilated location to install the
device.
The device must not be installed in overly exposed
location such on therear shelf, rear seat etc.
The installation location must be suitable for screw
holes and have stable ground support.
The supply voltage requirement is 12V DC with
grounded negative connection. Unauthorised dis-
mantling or modifying may void the warranty of the
device. Blaupunkt is not liable for any loss or damaged
caused or resulting from unauthorized reparation
or modication to the device. Refer to a Blaupunkt
specialist in case of any installation or reparation
required.
The devices core components may be damaged when
the car is driven on bumpy roads for a prolonged
period of time or if it is used to play non-standard
volume level.
Please do not operate the car radio under extreme
temperature conditions (extremely high temperature
or extremely low temperature); ensure the tempera-
ture within the car ranges from -10°C to 85°C (Storage
temperature : 5°C to 35°C) before connecting to the
power supply.
For abnormalities, please refer to TROUBLESHOOTING.
Consult a specialist if theproblem persist.
Solvents, cleaning and scouring agents as well as
dashboard spray and plastics care products may
contain materials which can damage the surface and
screen of the device. Use only dry or slightly moist-
ened cloth to clean the device.


Produkt Specifikationer

Mærke: Blaupunkt
Kategori: Ikke kategoriseret
Model: EQ 700

Har du brug for hjælp?

Hvis du har brug for hjælp til Blaupunkt EQ 700 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Blaupunkt Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer