Blaze BLZ-KMDO-SDSH Manual

Blaze Grill BLZ-KMDO-SDSH

Læs gratis den danske manual til Blaze BLZ-KMDO-SDSH (3 sider) i kategorien Grill. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om Blaze BLZ-KMDO-SDSH, eller vil du spørge andre brugere om produktet?

Side 1/3
-
Assembly Instructions
KAMADO SIDE SHELF KIT: BLZ- - KMDO SDSH
Your kamado side shelf kit includes two side shelves. Each shelf is identical and can be installed
on either side of the grill. You will need the included metric # 5 + # 6 millimeter allen wrench to
install.
1. Each side shelf has two brackets welded off to the right and left of the shelf itself. These
brackets fasten to the grill body via the installed on the grill four fasteners pre- body just below
the cooking grid surface. Place the openings in the brackets over the fasteners and slide
downward. See images below:
2. Once the shelf brackets are properly positioned over the fasteners, tighten the fasteners with
the included #5 mm allen wrench.
3. Underneath the shelf, you will find a shelf leveling / stabilizing screw. This screw holds tension
against the grill body leveling the shelf and holding it securely in this position. Tighten this screw
either by hand or using the #6 mm allen wrench. When complete, the shelf should be level. See
below:


Produkt Specifikationer

Mærke: Blaze
Kategori: Grill
Model: BLZ-KMDO-SDSH

Har du brug for hjælp?

Hvis du har brug for hjælp til Blaze BLZ-KMDO-SDSH stil et spørgsmål nedenfor, og andre brugere vil svare dig