Ein / Aus
Vorwäsche
Extra
spülen
Start / Pause
Schleudern
Startzeit
Trockenzeit
Bügelleicht
Energie sparen
Intensiv
ƈ
Waschen Trocknen Knitterschutz
R
On/Off
Cycle progress Display
Type of washing and temperature
AB1
Selector for the spin speed,
drying and
delay start functions
Spin speed,drying time
and delay start setting
Start/Pause: press briefly
Cancelled: long press
Sleekare, Eco, Intensive wash options
Prewash, Rinse Plus options
2 R 3 4 5
•
Press in the «On/Off» button
(Ein/Aus)
(1).
•
Turn the selector to select the programme and the washing
temperature. The machine proposes the recommended spin speed for
the type of textile selected.
•
Use the setting button
:
-
Either to alter the proposed spin speed.
-
Or to select stopping with the drum full of water.
The machine will stop with the drum full of water before the final spin.
• Select, or not, any of the following options:
- «Prewash» (Vorwäsche) and/or «Rinse Plus» (Extra Spülen) via button
- «Sleekare» (Bügelleicht) and/or «ECO» (Energie sparen) and «Intensive»
(Intensiv) via button
- Subsequent immediate drying via button then, via button , set the desired
drying time (for the washing load to be dried, see the Programmes table)
•
Select immediate start by pressing the «Start/Pause» button
...
• ... Or select a start delayed by 1 - 19 hours by using button to select this
option (Startzeit) and then using button to set the period of the delay.
R
3
2
R3
5
4
R
1Light
«Schleudern»
+
spin speed
recommended on
Light
«Schleudern»
+ e.g.:
or
+ selected options
+ «Trockenzeit»
+ e.g.
Light
«Waschen»
+
display of washing
time remaining
Light
«Startzeit»
+ display of time
remaining before the
cycle starts
A
A
A
Apart from the «On/Off» button (Ein/Aus), all the buttons are sensitive and therefore do not remain
depressed.
During programming, all the buttons except for «Start/Pause» can be kept depressed but, for more precise
adjustment, we recommend that you operate them with a series of brief presses.
You should operate the «Start/Pause» by pressing it briefly except when cancelling the programme, in
which case it should be kept depressed.
(*) Details of the function are provided in the following pages.
If one of the cycle progress lights is lit when you switch on, cancel before carrying out any other
operation.
Warning: the «On/Off» button cannot cancel a programme.
B
