BlueWalker PowerWalker VI 2000 LCD Manual


Læs gratis den danske manual til BlueWalker PowerWalker VI 2000 LCD (8 sider) i kategorien Uafbrydelig strømforsyning (UPS). Denne vejledning er vurderet som hjælpsom af 40 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 20.5 anmeldelser. Har du et spørgsmål om BlueWalker PowerWalker VI 2000 LCD, eller vil du spørge andre brugere om produktet?

Side 1/8
EN
Line Interacve UPS
PowerWalker VI 650 LCD/UK
PowerWalker VI 850 LCD/UK
PowerWalker VI 1000 LCD/UK
PowerWalker VI 1500 LCD/UK
PowerWalker VI 2000 LCD/UK
Quick Start Guide
EN
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS This manual contains important instrucons for models
PowerWalker VI 650/850/1000/1500/2000 LCD /UK that should be followed during installaon
and maintenance of the UPS and batteries.
This product is specially designed for PCs and it is not recommended for use in any life-
supporng system and other specic important equipment.
This equipment can be operated by any individual with no previous training.
Do not plug household appliances such as hair dryers to UPS receptacles.
This unit intended for installaon in a controlled environment (temperature controlled,
indoor area free of conducve contaminants). Avoid installing the UPS in locaons where
there is standing or running water, or excessive humidity.
Risk of electric shock, do not remove cover. No user serviceable parts inside. Refer
servicing to qualied service personnel.
The ulity power outlet shall be near the equipment and easily accessible. To isolate UPS
from AC input, remove the plug from the ulity power outlet.
If UPS is to be stored for a long me, it is recommended to recharge the baeries (by
connecng the ulity power to UPS, switch “ON”), once a month for 24 hours to avoid a
full baery discharge.
Please do not use the UPS in excess of the rated load capacity.
The UPS contains one/two large-capacity batteries. So the shell shall not be opened,
otherwise such dangers as electric shock will be caused. If any internal overhaul or
replacement of the baery is required, please contact the distributor.
The internal short circuing of the UPS will lead to dangers such as electric shock or re,
therefore, no water containers (such as a water glass) shall be placed on the top of the
UPS so as to avoid such dangers as electric shock.
Do not dispose of baery or batteries in a re. The baery may explode.
Do not open or mulate the baery or baeries. Released electrolyte is harmful to the
skin and eyes. It may be toxic.
Icon on the rang label stands for phase symbol. Φ
A baery can present a risk of electrical shock and high short circuit current. The
following precauons should be observed when working on baeries :
Remove watches, rings, or other metal objects from the hand.
Use tools with insulated handles.


Produkt Specifikationer

Mærke: BlueWalker
Kategori: Uafbrydelig strømforsyning (UPS)
Model: PowerWalker VI 2000 LCD
Bredde: 146 mm
Dybde: 397 mm
Højde: 205 mm
Vægt: 12100 g
Produktfarve: Sort
Skærmtype: LCD
Pakkevægt: 13100 g
Formfaktor: Tower
Relativ luftfugtighed ved drift (H-H): 0 - 90 %
Ethernet LAN-porte (RJ-45): 1
Antal USB 2.0-porte: 1
Driftstemperatur (T-T): 0 - 40 °C
Støjniveau: 40 dB
Udgangseffekt: 1200 W
Pakkens dimensioner (BxDxH): 230 x 495 x 290 mm
Batteritype: 2x 12V / 9Ah
Opladningstid for batteri: 4 t
Medfølgende software: ViewPower
Indgangsfrekvens: 50/60 Hz
Modem-porte (RJ-11): 1
AC udgange, antal: 5 AC stikkontakt(er)
Indgående driftsspænding (maks.): 290 V
Output strømkapacitet (VA): 2 kVA
Indgående driftsspænding (min.): 160 V
Udgangs driftsspænding (min.): 220 V
Udgangs driftsspænding (maks.): 240 V
Typisk backup tid ved halv styrke: - min.
Typisk backup tid ved fuld styrke: - min.

Har du brug for hjælp?

Hvis du har brug for hjælp til BlueWalker PowerWalker VI 2000 LCD stil et spørgsmål nedenfor, og andre brugere vil svare dig