Blustream UEX50B-KIT Manual

Blustream Ikke kategoriseret UEX50B-KIT

Læs gratis den danske manual til Blustream UEX50B-KIT (6 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 3.8 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om Blustream UEX50B-KIT, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/6
UEX50B-KIT QUICK REFERENCE GUIDE
Contact: support@blustream.com.au | | support@blustream-us.com support@blustream.co.uk
UEX50B-KIT
Quick Reference Guide
01
Our UEX50B-KIT delivers USB 2.0 extension up to 50m over a single CAT cable
while allowing up to 4 USB devices to be connected to a single USB host. Supports
transmittion data bandwidth up to 480Mbps, backwards compatible with USB 1.1
devices.
Introduction
FEATURES:
• Extends USB up to a distance of 50m over a single CAT cable
• Supports USB 2.0 signal extension
• Backwards compatible with USB 1.1 devices
• Transmitted data bandwidth up to 480Mbps
• 1x USB-B on Receiver for connection to host device
• 4x USB-A hub on Transmitter for conncetion to devices
• USB-A ports 1-2 support 5V1A, USB-A ports 3-4 support 5V500mA
• Simple plug and play, no driver installation or setup required.
*Signal distribution length subject to length of device and host USB cables and CAT cable type
UEX50B-KIT QUICK REFERENCE GUIDE
www.blustream.com.au | www.blustream-us.com www.blustream.co.uk|02
TX Panel Descriptions
1 CAT Cable Connect to CAT cable and to UEX50B-RX Connection -
2 12V/2A DC Power Input screw type connector
3 Power Status Indicator
4 1A USB Device Connection - USB A connection to connect to high current (up to 1A) USB devices
5 500mA USB Device Connection - USB A connection to connect to low current (up to ) USB devices500mA
6 CAT Cable Connect to CAT cable and to UEX50B-TX Connection -
7 Power Switch - Select between powering the Receiver from the Transmitter (TX) or Host PC that USB is connected to
8 USB Host Connection - USB B connection to connect to PC
9 Power Status Indicator
7 8
4
9
RX Panel Descriptions
21
6
53
Device Cabling
It is important that interconnecting CAT cable between the Transmitter and Receiver is terminated using straight the
correct RJ45 pin configuration. The CAT cable MUST be a ‘straight’ (pin-to-pin) CAT cable.
Please ensure that the USB cabling used with this product is within specifications for both the distance and maximum
/ expected data rate transfer of the equipment in use. Exceeding distances, or using cabling not suitable for the data
transfer, may stop the UEX50B-KIT from working properly.
It is recommended to keep the USB cabling either side of the UEX50B-KIT to a minimum, using the range of the
equipment to run the distance over the CAT cable infrastructure.

Produkt Specifikationer

Mærke: Blustream
Kategori: Ikke kategoriseret
Model: UEX50B-KIT

Har du brug for hjælp?

Hvis du har brug for hjælp til Blustream UEX50B-KIT stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Blustream Manualer

Blustream

Blustream DAC13DB Manual

26 Januar 2025
Blustream

Blustream MX44KVM Manual

26 Januar 2025
Blustream

Blustream DA11USB Manual

26 Januar 2025
Blustream

Blustream DA22XLR-WP-US Manual

2 September 2024
Blustream

Blustream UEX50B-KIT Manual

28 August 2024
Blustream

Blustream SC11HD-V2 Manual

28 August 2024
Blustream

Blustream UEX100E-KIT Manual

28 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Playtive

Playtive IAN 303676 Manual

16 Juni 2025
Playtive

Playtive IAN 307527 Manual

16 Juni 2025
Playtive

Playtive IAN 327441 Manual

16 Juni 2025
Xblitz

Xblitz G750 Pro Manual

16 Juni 2025
Playtive

Playtive IAN 285603 Manual

16 Juni 2025
Playtive

Playtive HG05646 Manual

16 Juni 2025
Milwaukee

Milwaukee M12 IR Manual

16 Juni 2025
Blodgett

Blodgett Invoq 202BG Manual

16 Juni 2025
Aiphone

Aiphone GT-AD Manual

16 Juni 2025
Playtive

Playtive IAN 113608 Manual

16 Juni 2025