Bogen MCDS4 Manual

Bogen Telefon MCDS4

Læs gratis den danske manual til Bogen MCDS4 (2 sider) i kategorien Telefon. Denne vejledning er vurderet som hjælpsom af 45 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 23 anmeldelser. Har du et spørgsmål om Bogen MCDS4, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Model MCDS4

Administrative Telephone Operating Instructions

54-5031-01G 1509

The Bogen Model MCDS4 is a 12-push-

button, touch-tone type telephone

designed for use as an administrative

telephone in Bogen communications

systems. It incorporates an LCD display

panel and unique display menu system to

provide rapid, efficient and reliable control

over the system’s operational functions.

The MCDS4 also includes nine dedicat-

ed function pushbuttons and three pro-

grammable function buttons. The dedicat-

ed functions include: Speed Dial of up to

10 frequently dialed numbers, Redial last

number, Speakerphone (for hands-free

conversation), Line (to get dial tone when

using the speaker), Hold, and Speaker

Volume Control. The programmable func-

tion buttons can be used to direct dial a

frequently called number or to activate one

of the system’s communications func-

tions (alarm, external relay, etc.).

The MCDS4 provides five different ring

signals to distinguish call alert, normal,

urgent, emergency calls, and incoming

outside line calls. It is fully compatible with

the MCTC Board option and, when con-

nected to a Multicom 2000 system’s

RS485 interface, can display the status of

the first 8 outside lines and hold status for

those lines.

The phone may be mounted on a wall or

desktop. It includes a pull-out number

index and a replaceable coil cord.

1. ADDITIONAL MCDS4’s CAN BE CONNECTED IN PARALLEL, TO EITHER PINS 1 & 2

OR 3 & 4 ON MC2000 BACKPLANE CONNECTOR P8 (MULTICOM 2000 ONLY).

2. FOR MCPCA2 MICROPROCESSOR CARD SET, JUMPER JMP1 TO THE

“ON” POSITION. COM 2 PORT USED FOR OUTSIDE LINE STATUS ONLY.

3. ACTUAL MODULAR BLOCK TERMINALS MAY NOT FOLLOW ORDER AS SHOWN

ON DIAGRAM - USE COLORS AS REFERENCE, NOT POSITIONS.

NOTES

TO RED TERMINAL ON MODULAR BLOCK

SHIELD OR SEPARATE CONDUCTOR

DEPENDING ON CABLE TYPE

Dedicated Feature Buttons

SPEED DIAL

Used to select a number stored in memory

REDIAL

Redials the last number called

SPKR

Selects speakerphone mode

HOLD

Places a call on hold (must be connected to

RS485 interface for hold to operate properly)

UP/DOWN

(Arrows)- Increases/decreases the ring volume;

adjusts speaker volume; scrolls display menu,

and adjusts handset volume

LINE

Provides direct access of an outside line or

line that has been placed on hold

PAUSE

Used in programming, to place a pause

between digits

SAVE

Used to save numbers in speed dial memory

Operation

To get dial tone: Lift handset or press button

To place a call:

Internal — Get dial tone. Dial plus the extension or classroom number

to call classroom telephone, or, dial extension or classroom number to call

classroom speaker.

Outside Line — Get dial tone. Press and then . You will be connected to

the first available line, or, direct access by dialing the line architectural number,

or, direct access by pressing and line number desired (1 - 8).

Overview of MCDS4

Wall-Mount Instructions

To Install MCDS4 as a wall-mounted phone, follow these steps:

• STEP 1: Remove (4) screws on bottom of unit, and also remove directory plate.

• STEP 2: Detach unit and rotate bottom of unit 180 degrees.

• STEP 3: Re-insert screws and hang from wall using keyholes.

Wiring

Install the MCDS4 according to the diagram on the last page. If the optional outside

line feature is installed, the MCDS4 must be correctly wired to the RS485 interface.

Advanced Operation

Speed Dial Programming

1. Make sure handset is in cradle.

2. Press button.

3. Select a speed dial code by pressing through .

4. Pick up the handset or press button. Enter the extension number or out-

side number to be stored. Note: If you need to enter a pause in the dialing

string to accommodate a PBX outside line function, for example, press the

button. Each press will create a pause of approximately 1 second.

5. Press button after completing the number string.

6. Press to store the number in memory.

To Speed Dial: (0 - 9)Get dial tone. Press button and the speed dial code .

Programmable Function Buttons

To program the function buttons, perform the following steps:

1. Make sure handset is in cradle.

2. Press one of the function buttons.

3. Pick up handset or press button. Enter the extension number, outside

line number, or DTMF string to be stored (if storing events such as alarms,

zone pages, etc.). Note: If you need to enter a pause in the dialing string to

accommodate a PBX outside line function, for example, press the

button. Each press will create a pause of approximately 1 second.

4 Press button after the complete number string.

5. Press to store the number in memory.

Programmable Buttons

To Redial the last number called: Get dial tone and press button.

To Place a Call On Hold: Press the button. Note: For Multicom 2000 systems,

when an outside line is placed on hold, an “H” will flash on the outside line status

display. (RS485 wiring connection required.)

To Retrieve a Call:

Internal — Press the button.

Outside Line — Press and the line number (1 - 8) using the numeric buttons.

To Disconnect a Call: Hang up the handset or, if in speaker mode, press .

To Adjust Ring Volume: Make sure the phone is off-line. Press to increase

ring volume. Press to decrease volume.

To Adjust Speaker Volume: Press button. Press button to increase vol-

ume. Press to decrease volume.

To Adjust Handset Volume: Lift Handset. Press to increase volume.

Press to decrease volume .(4 volume steps)

Produkt Specifikationer

Mærke:	Bogen
Kategori:	Telefon
Model:	MCDS4

Har du brug for hjælp?

Hvis du har brug for hjælp til Bogen MCDS4 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Telefon Bogen Manualer

Bogen MCDS4 Manual

1 Marts 2025

Bogen CA15C Manual

1 Marts 2025

Telefon Manualer

Nyeste Telefon Manualer

Alcatel Temporis SP2604G Manual

10 Juni 2025

Panasonic KX-TGC212 Manual

9 Juni 2025

Panasonic KX-TG8051 Manual

6 Juni 2025

Siemens Gigaset E500 Manual

2 Juni 2025

Gigaset E290M Manual

9 April 2025

Ubiquiti Networks G3 Touch Enterprise Manual

25 Februar 2025

POCO X3 GT Manual

22 Februar 2025

POCO M4 Pro 5G Manual

22 Februar 2025

Doro Leva X10 Manual

11 Februar 2025

Cyber Acoustics SP-2000 Manual

7 Februar 2025