Bose LT 9400 Manual

Bose Højttaler LT 9400

Læs gratis den danske manual til Bose LT 9400 (32 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 39 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 20 anmeldelser. Har du et spørgsmål om Bose LT 9400, eller vil du spørge andre brugere om produktet?

Side 1/32
Bose® LT and MB Series Loudspeakers
Owner’s Guide
Brugervejledning
Bedienungsanleitung
Guía de usuario
Notice d’utilisation
Manuale di istruzioni
Gebruiksaanwijzing
Bruksanvisningen
For use by trained installers only
Kun til faguddannede montører
Nur zur Montage durch einen Fachinstallateur
Para el uso de instaladores experimentados
Pour des installateurs chevronnés uniquement
L’utilizzo è riservato agli installatori esperti
Uitsluitend bestemd voor gekwalificeerde installateurs
Endast för professionella användare
LT 6403 Full-Range Loudspeaker
LT 9403 Full-Range Loudspeaker
MB12 WR Modular Bass Loudspeaker
MB24 WR Modular Bass Loudspeaker
MB12 Modular Bass Loudspeaker
MB24 Modular Bass Loudspeaker
LT 3202® WR Mid/High Loudspeaker
LT 4402® WR Mid/High Loudspeaker
LT 9402TM
WR Mid/High Loudspeaker
LT 9702® WR Mid/High Loudspeaker
LT 6400 Mid/High Loudspeaker
LT 9400 Mid/High Loudspeaker
LT MB
2
Mounting LT and MB Series Loudspeakers
English
Mounting Guidelines
WARNING: The LT and MB Series loudspeakers must be attached to brackets or other mounting surfaces for
permanent or seasonal use. Such mountings, typically in overhead locations, involve risk of personal injury if either
the mounting system or the loudspeaker attachment fails. Installation of the mounting system must be performed in
accordance with all applicable
building codes including local codes. Consul
t the local authority having jurisdiction
before installing this product.
The LT loudspeaker installation requires the use of either Bose® or non-Bose mounting products. While Bose Corporation
cannot be held responsible for the proper design and use of non-Bose mounting systems, we offer the following informa-
tion and guidelines for the permanent installation of your LT loudspeakers:
Obtain your mounting system from a reputable manufacturer. Select a system design that works for your
loudspeaker of choice and its intended use.
Before using a custom-designed mounting system, have a licensed professional engineer review the design and
fabrication for structural integrity and safety in the intended application.
The threaded attachment points on the top, bottom, and sides of each loudspeaker have an SAE 3/8-16" thread with
at least 18 usable threads.
Lock washers or a locking compound intended for hand disassembly (such as Loctite 242) should be used for a
vibration resistant assembly.
Use a safety cable, separately attached to the cabinet, at a point not in common with the load bearing attachment
points of the mounting system to the loudspeaker. This is recommended even if not required by local regulation.
If you are unfamiliar with the proper design, use, and purpose of a safety cable, consult a licensed professional
engineer or a rigging professional.
Loudspeakers should not be hung using the handles as hang points.
Additional loudspeakers may be suspended below the LT loudspeaker provided that:
It employs all 8 threaded-insert hang points on the top and bottom to fly and suspend the loudspeakers.
The total weight of suspended loudspeakers and the LT loudspeaker does not exceed the working load limit
(WLL) listed below:
CAUTION: Use only graded hardware. Fasteners should be SAE Grade 5 or ASTM designation A354, Grade BC
minimum. Unmarked machine fasteners should not be used for mounting system assembly, as there is no way to
determine their physical properties. Do not use an M10 fastener; although it is very similar to an SAE 3/8-16, they
are not interchangeable. M10 washers may be used in place of 3/8'' washers.
CAUTION: The fasteners should be tightened using torque not to exceed 50 pounds/inch (5.6 Newton-
meters). Over-tightening the fastener could result in irreparable damage to the cabinet and create an unsafe
assembly.
CAUTION: The fastener should be long enough to engage no fewer than 16 threads of the attachment point.
Using a fastener that is too short provides inadequate holding power and may strip the mounting threads, resulting
in an unsafe assembly. Confirm that at least 16 full threads are engaged in your assembly.
CAUTION: Do not attempt to alter the threaded attachment points. Do not attempt to re-thread the attachment
points to accommodate any other thread size or type; doing so will compromise the safety of the installation while
permanently damaging the loudspeaker.
LT 3202® WR Loudspeaker = 395 lb (179 kg) LT 6400 Loudspeaker = 420 lb (190 kg) MB12 WR Loudspeaker = 350 lb (158 kg)
LT 4402® WR Loudspeaker = 299 lb (135 kg) LT 9400 Loudspeaker = 420 lb (190 kg) MB24 WR Loudspeaker = 520 lb (236 kg)
LT 9402TM WR Loudspeaker = 261 lb (118 kg) LT 6403 Loudspeaker = 454 lb (205 kg) MB12 Loudspeaker = 350 lb (158 kg)
LT 9702® WR Loudspeaker = 381 lb (173 kg) LT 9403 Loudspeaker = 454 lb (205 kg) MB24 Loudspeaker = 520 lb (236 kg)


Produkt Specifikationer

Mærke: Bose
Kategori: Højttaler
Model: LT 9400

Har du brug for hjælp?

Hvis du har brug for hjælp til Bose LT 9400 stil et spørgsmål nedenfor, og andre brugere vil svare dig