Boss AD-10 Manual


Læs gratis den danske manual til Boss AD-10 (14 sider) i kategorien Guitar forstærker. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om Boss AD-10, eller vil du spørge andre brugere om produktet?

Side 1/14
Copyright © 2017 ROLAND CORPORATION
Owner’s Manual
The AD-10 is designed for the acoustic guitarist who performs live; in a single unit, it combines a preamp, eects, looper, and
direct box.
Contents
Getting Ready . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Connecting the Equipment . . . . . . . . . . . . . . . . . . . . 2
Connecting a Footswitch or an Expression Pedal . . . . 3
Turning On/O the Power . . . . . . . . . . . . . . . . . . . . . 3
Input Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Adjusting the Input Sensitivity . . . . . . . . . . . . . . . 4
Switching Between GUITAR IN 1/2 and
Adjusting the Balance . . . . . . . . . . . . . . . . . . . . . . 4
Tuning the Guitar (Tuner) . . . . . . . . . . . . . . . . . . . . . 4
Manual/Memory Mode . . . . . . . . . . . . . . . . . . . . . . 5
Manual Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Memory Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Saving a Memory . . . . . . . . . . . . . . . . . . . . . . . . . 5
Initializing Memory Settings . . . . . . . . . . . . . . . . . 5
Editing the Eects . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
EQ (Equalizer) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
BOOST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
FX LOOP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
ANTI-FEEDBACK. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
ACOUSTIC RESONANCE . . . . . . . . . . . . . . . . . . . . . . . 7
COMP (Compressor) . . . . . . . . . . . . . . . . . . . . . . . . . 7
DELAY/CHORUS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
AMBIENCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Sub-Parameter Settings . . . . . . . . . . . . . . . . . . . . . . . 8
Looper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Advanced Settings . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Output Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Ambience Output Settings . . . . . . . . . . . . . . . . . . 10
Stomp Pedal Setting . . . . . . . . . . . . . . . . . . . . . . . . . 11
System Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Making Independent EQ Settings for GUITAR
IN 1 and 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Assigning the Functions of the Pedals. . . . . . . . . . 12
Other Functions . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Restoring the Factory Settings (Factory Reset) . . . . . . 13
Appendices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Main Specications . . . . . . . . . . . . . . . . . . . . . . . . . . 14
USING THE UNIT SAFELY . . . . . . . . . . . . . . . . . . . . . . 14
IMPORTANT NOTES . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Before using this unit, carefully read “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (the leaet “USING THE UNIT SAFELY” and the Owner’s
Manual p. 14)). After reading, keep the document(s) where it will be available for immediate reference.
2
Getting Ready
Connecting the Equipment
* To prevent malfunction and equipment failure, always turn down the volume, and turn o all the units before making any connections.
Rear Panel
USB COMPUTER port
Use a commercially available USB 2.0 cable to connect
this port to your computer so that audio can be sent and
received between the AD-10 and the computer. You can
record the AD-10’s sound into your
computer, or output sound from your
computer via the AD-10’s output jacks.
SEND, RETURN jacks
Connect an external eect device (mono).
Connect the SEND jack to the input of your external eect
device, and connect the output of your external eect
device to the RETURN jack.
LINE OUT (L/PHONES, R/MONO) jacks
Connect these jacks to your guitar amp or headphones.
* Connect your headphones to the L/PHONES jack.
* If using a mono connection, use only the R/MONO jack.
XLR OUT (L, R) jacks
Connect to the PA etc.
* Pin assignment of XLR OUT (L, R) jack.
1 GND 2 HOT
3 COLD
DC IN jack
Connect the included AC adaptor here.
* We recommend that you keep batteries
installed in the unit even though you’ll be
powering it with the AC adaptor. That way,
you’ll be able to continue a performance even
if the cord of the AC adaptor gets accidentally
disconnected from the unit.
GUITAR IN (1, 2) jacks
Connect your guitar.
You can use the two jacks to blend two dierent types of
pickups, or to connect two guitars.
Subsequently attached pickup
Built-in pickup SEND0INPUT
RETURN1OUTPUT


Produkt Specifikationer

Mærke: Boss
Kategori: Guitar forstærker
Model: AD-10

Har du brug for hjælp?

Hvis du har brug for hjælp til Boss AD-10 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Guitar forstærker Boss Manualer

Guitar forstærker Manualer

Nyeste Guitar forstærker Manualer