Botex NETcon 1-3 Manual

Botex Ikke kategoriseret NETcon 1-3

Læs gratis den danske manual til Botex NETcon 1-3 (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 8 anmeldelser. Har du et spørgsmål om Botex NETcon 1-3, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

Thomann GmbH • Hans-Thomann-Straße 1 • 96138 Burgebrach • www.thomann.de • info@thomann.de DocID: 451599_13.01.2020

User manual

This manual contains important information on the safe operation of the product.

Read and follow the safety advice and instructions given. Retain the manual for future

reference. If you pass the product on to others please include this manual.

NETcon 1 3 Art-Net Node–

For the transport and protective packaging, environmentally friendly materials

have been chosen that can be supplied to normal recycling. Ensure that plastic

bags, packaging, etc. are properly disposed of. Do not just dispose of these ma-

terials with your normal household waste, but make sure that they are collected for recy-

cling. Please follow the notes and markings on the packaging.

This product is subject to the European Waste Electrical and Electronic Equip-

ment Directive (WEEE) in its currently valid version. Do not dispose of your old

device with your normal household waste. Dispose of this product through an

approved waste disposal rm or through your local waste facility. Comply with

the rules and regulations that apply in your country. If in doubt, consult your local waste

disposal facility.

Safety instructions

Intended use

This device is used to distribute ArtNet and Ethernet signals. Any other use or use

under other operating conditions is considered to be improper and may result in

personal injury or property damage. No liability will be assumed for damages result-

ing from improper use.

Danger for children

Ensure that plastic bags, packaging, etc. are disposed of properly and are

not within reach of babies and young children. Choking hazard! Ensure

that children do not detach any small parts from the product. They could

swallow the pieces and choke! Never let children unattended use electrical devices.

Where to use the product

Never use the product

• in conditions of extreme temperature or humidity

• in extremely dusty or dirty areas

• at locations where the unit can become wet

General handling

• To prevent damage, never use force when handling the product.

• Never immerse the product in water. Just wipe it with a clean dry cloth. Do not use

liquid cleaners such as benzene, thinners or ammable cleaning agents.

Features

• ArtNet / DMX converter

• Bidirectional ArtNet Node for professional requirements

• Conguration via built-in display directly on the device

• RDM capable

• Adjustable DMX repeat rate (10–40Hz)

• For 512 channels / one DMX universe

• Converts either ArtNet to DMX or DMX to ArtNet

• Black metal housing

Technical specications

Connections: 2×Ethernet RJ45 lockable

XLR 3-pin. DMX in and output

Power supply: via supplied power adapter: DC 5V /10W

Protective class: IP20

Dimensions (W×H×D): 167×130×110mm

Weight: 0.34kg

Using the product

Press MODE to enter the following menu, then use UP & DOWN to select the desired entry which you call up with SETUP:

1. IP address

2.x.x.x IP type 1, automatically generated, not editable

IP address setting for ArtNet must be made according to the setting

under IP type (4.).

10.x.x.x IP type 2, automatically generated, not editable

DHCP IP type 3, automatically generated, not editable

192.168.000.008 IP type 4, adjustable by user

2. Subnet mask

255.000.000.000 IP type 1, automatically generated, not editable

Subnet mask setting for ArtNet must be made according to the

setting under IP type (4.).

255.000.000.000 IP type 2, automatically generated, not editable

DHCP IP type 3, automatically generated, not editable

255.255.255.000 IP type, adjustable by user

3. Universe 000 255–ArtNet universe setting must be made according to the setting under

IP type (4.).

4. IP type

2.x.x.x (Auto) IP address, automatically generated, not editable

Species the IP type for ArtNet.

10.x.x.x (Auto) IP address, automatically generated, not editable

DHCP IP address, automatically generated, not editable

Custom IP IP address adjustable by user

5. Unicast address xxx.xxx.xxx.xxx For setting the ArtNet unicast address. The validity of a unicast ad-

dress requires the settings ‘DMX | DIR: IN’ and ‘unicast | ON’.

6. DMX Dir In DMX input, conversion DMX -> ArtNet For setting the ArtNet direction.

Out DMX input, conversion ArtNet -> DMX

7. Unicast

On, (Unicast on)

Mode Master Slave Notes:

• The validity of the unicast setting requires the setting ‘DMX | DIR: IN’.

• ‘XXX’ means ‘value irrelevant’.

• The unicast address of master and IP address is the same as in uni-

cast mode. However, there is one special case, for example, the slave

IP address: 192.168.1.1, master unicast address: In addition to the

setting of 192.168.1.1, it can also be set to 192.168.1.255, where 255

is a general address. The last IP range of the slave is 0-254. Therefore,

we recommend not to use 255 as a special address.

IP address 192.168.1.0 192.168.1.1

Subnet mask 255.255.255.0 255.255.255.0

Universe 0 0

IP type 4) Custom IP 4) Custom IP

Unicast address 192.168.1.1 xxx.xxx.xxx.xxx

DMX Dir OutIn

Unicast On O

O, (Unicast o), Broadcast

Mode Master Slave

IP address 192.168.1.0 192.168.1.1

Subnet mask 255.255.255.0 255.255.255.0

Universe 0 0

IP type 4) Custom IP 4) Custom IP

Unicast address xxx.xxx.xxx.xxx xxx.xxx.xxx.xxx

DMX Dir OutIn

Unicast O O

8. RDM Enable On To enable (On) or disable (O ) the RDM function.

O

9. Frame Rate 10 40(Hz) Sets the DMX repeat rate for ArtNet.–

10. Settings

Lock On Enables (On) or disables (O) automatic display lock. To release the

display lock, keep [Mode] and [Setup] pressed for 3 sec.O

Back light On Enables (On) or disables (O) backlight auto-o function when not

in use.O

Factory Yes Reset to delivery condition.

11. Exit To exit the menu.

Produkt Specifikationer

Mærke:	Botex
Kategori:	Ikke kategoriseret
Model:	NETcon 1-3

Har du brug for hjælp?

Hvis du har brug for hjælp til Botex NETcon 1-3 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Botex Manualer

Botex Chainhoist Controller CHC-8-B Manual

5 August 2025

Botex Chainhoist Controller CHC-4-B Manual

5 August 2025

Botex PSA 631 Power Distributor Manual

22 Marts 2025

Botex BO-6-S2 Manual

21 August 2024

Botex HULK 4S CEE Manual

20 August 2024

Botex BO-6-PW 16A CEE Manual

20 August 2024

Botex Power Splitter 32 A Manual

20 August 2024

Botex PSA 322-6-TR1 Manual

19 August 2024

Botex BO-6-SI Manual

19 August 2024

Botex BO-6-PG Manual

18 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Navitel ALC 01 Manual

5 November 2025

SilentiumPC Vero L3 Bronze 600W Manual

5 November 2025

JoeCo BlackBox BBR1-U Manual

5 November 2025

Ices IWO-630 Manual

5 November 2025

JMAZ Crazy Beam 40 Fusion Manual

5 November 2025

Lexar Professional LRW530U Manual

5 November 2025

Zotac GeForce GT 610 Manual

5 November 2025

NeXtime Basic Dome 3157 ZW Manual

5 November 2025

DS18 PU110A Manual

5 November 2025

JMAZ Galaxy Tube Manual

5 November 2025