Bowers & Wilkins Formation Flex Manual

Bowers & Wilkins Højttaler Formation Flex

Læs gratis den danske manual til Bowers & Wilkins Formation Flex (91 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 11 anmeldelser. Har du et spørgsmål om Bowers & Wilkins Formation Flex, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/91

ENGLISH

www.bowerswilkins.com

Welcome to Bowers & Wilkins and Formation Flex.

Thank you for choosing Formation. When John Bowers rst established Bowers

& Wilkins he did so in the belief that imaginative design, innovative engineering

and advanced technology were keys that could unlock the enjoyment of audio

in the home. That belief continues to inspire every product we design and in

Formation has found its most advanced expression yet.

Formation Flex is a network connected, wireless active speaker that provides

extremely high performance reproduction of Formation audio streams. Formation

Flex is primarily intended to be congured and controlled using the Bowers &

Wilkins Home app. The app is available for both iOS and Android devices. Some

commonly used control functions are also available via touch buttons on the

Formation Flex top panel. It is only possible to install and congure a Formation

Flex using the Bowers & Wilkins Home app.

Formation Flex will enable you to:

• Listen to audio from streaming services like Spotify, Apple Music, and Roon.

• Listen to network stored audio les.

• Listen to audio over Bluetooth from appropriately enabled Bluetooth

source devices.

• Listen to audio from devices such as turntables (via a phono preamp) and

CD players that are connected to a Bowers & Wilkins Formation Audio.

• Listen to audio, such as Internet Radio, from Airplay or Bluetooth

compatible services and apps.

• Listen to audio playing anywhere in your home on any Formation device

connected to your home network.

The Bowers & Wilkins Home app is required to connect your Formation Flex

to your home network and also to establish a connection with other Formation

products in your home. The Bowers & Wilkins Home app also provides some

control and conguration functions during use. Before you begin your Formation

Flex installation please download and install the Bowers & Wilkins Home app on

your iOS or Android device. The Bowers & Wilkins Home app requires iOS V11.4

or later, or Android V8.1 or later. Bluetooth, and WiFi services must be enabled

on your iOS or Android device. You will also need to know your WiFi network

password.

Note: Location Services must be enabled on Android devices during the

Formation setup process. This is because Formation products use a low power

form of Bluetooth (BT-LE) for service communication which on Android devices is

only switched on when Location Services are enabled. Bowers & Wilkins do not

use any location services data for marketing purposes.

Produkt Specifikationer

Mærke:	Bowers & Wilkins
Kategori:	Højttaler
Model:	Formation Flex
Vekselstrømsindgangsspænding:	100-240 V
Vekselstrømsindgangsfrekvens:	50/60 Hz
Bredde:	130 mm
Dybde:	130 mm
Højde:	215 mm
Vægt:	2300 g
Produktfarve:	Black,Gold
Wi-Fi:	Ja
Bluetooth:	Ja
Udgangseffekt (RMS):	- W
Strømforbrug (standby):	6 W
Bluetooth-version:	4.1
Anbefalet brug:	Hjem
Frekvensområde:	50 - 28000 Hz
Forbindelsesteknologi:	Trådløs
Lyd-output kanaler:	- kanaler
Højttaler, placering:	Bordplade/bogreol
Strømkilde type:	Vekselstrøm
USB-tilslutning:	Ja
Antal drivere:	2
Diskanthøjttaler:	Ja
Antal drivere til diskant:	1
Diskant diameter:	1 "
Bashøjttaler:	Ja
Antal bashøjttalerdrev:	1
Woofer diameter:	101.6 mm
Forstærker:	Indbygget
Forstærker klasse:	D
AirPlay:	Ja
Forstærker, udgående strøm:	100 W
Woofer diameter (britisk mål):	4 "