BSS Audio Soundweb London BLU-SI Manual

BSS Audio Stavblender Soundweb London BLU-SI

Læs gratis den danske manual til BSS Audio Soundweb London BLU-SI (6 sider) i kategorien Stavblender. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.2 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om BSS Audio Soundweb London BLU-SI, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/6
Using the BLU-SI option card
The BLU-SI option card provides BLU Link connectivity for Soundcraft Si Compact,
Si Performer and Si Expression consoles. NOTE: Si1, Si2 and Si3 do not support the BLU-
Si option card. 32 channels can be transmitted onto the BLU Link bus and 32 channels
can be received from the BLU Link bus. DIP switches allow the selection of consecutive
channels in groups of 32. (The BLU Link card with the red DIP switches is mounted onto
the carrier card with the black DIP switches.) The BLU-Si is only supported in the following
console software versions:
Si Compact v3.0 or above / Si Performer v1.5 or above / Si Expression v1.5 or above
Setting up the BLU-SI option card (single use)
WARNING: Before installing or removing the option card, make sure the mains power
cord is unplugged.
Adjust the red DIP switches to select the group of channels required using the table
below. (On = Up) The transmit and receive channels should
not
be the same.
In the example below, the red DIP switches will set the card to transmit channels
1-32 onto the BLU Link bus and receive channels 33-64 from the BLU Link bus.
The black DIP switch must be left with its default settings as shown in the table
below. No other settings are valid.
Soundweb
TM
London
1
Using the BLU-SI option card
2
The Master/Slave switch must be in the Master position which is pushed in.
No other setting is valid. When set to the Master position the BLU-SI card will
synchronise to the console’s word clock and will assume the role of BLU Link clock
master.
After installing the card into an available option slot the console’s I/O Configuration must be reset
in order for BLU-SI option card channels to become available for patching. Press the MENU key and
the select SHOW on the touch screen. Select RESET CONFIG and then select YES on the confirmation
dialogue box.
The BLU-SI card should now be successfully routed to the expansion bus inputs and outputs.
The selected group of 32 transmit and 32 receive channels should now available for patching to the
console’s channel inputs and from the bus outputs.
Note: When patching inputs and outputs on the console, the BLU-SI option card channels will always be
displayed as 1 to 32 regardless of the actual BLU Link channels selected with the red DIP switches.

Produkt Specifikationer

Mærke: BSS Audio
Kategori: Stavblender
Model: Soundweb London BLU-SI

Har du brug for hjælp?

Hvis du har brug for hjælp til BSS Audio Soundweb London BLU-SI stil et spørgsmål nedenfor, og andre brugere vil svare dig


Stavblender BSS Audio Manualer

BSS Audio

BSS Audio Soundweb London BLU-SI Manual

14 September 2025

Stavblender Manualer

Nyeste Stavblender Manualer

Mackie

Mackie MobileMix Manual

14 September 2025
Arendo

Arendo Mano 304826 Manual

12 September 2025
Arendo

Arendo Mano 304301 Manual

12 September 2025
Sonifex

Sonifex AVN-PM8 Manual

11 September 2025
Maestro

Maestro MR555 Manual

9 September 2025
Tascam

Tascam SB-16D Manual

8 September 2025
Arendo

Arendo MIKO 305401 Manual

6 September 2025
Sonifex

Sonifex S1 Manual

4 September 2025
Zelmer

Zelmer ZHB6000 SMART Manual

3 September 2025
Sencor

Sencor SHB 5001BK Manual

2 September 2025